Final Degree Project
Diseño de un sistema de medida de parámetros físicos en una motocicleta de competición
Author/s | Zapata Galafate, Francisco José |
Director | Perales Esteve, Manuel Ángel |
Department | Universidad de Sevilla. Departamento de Ingeniería Electrónica |
Publication Date | 2020 |
Deposit Date | 2020-07-23 |
Academic Title | Universidad de Sevilla. Grado en Ingeniería Electrónica, Robótica y Mecatrónica |
Abstract | En el presente trabajo se pretende detallar y explicar el diseño de un sistema de medida de parámetros físicos
de una motocicleta de competición. Cabe destacar que, el proyecto consta de tres partes: la programación
gráfica ... En el presente trabajo se pretende detallar y explicar el diseño de un sistema de medida de parámetros físicos de una motocicleta de competición. Cabe destacar que, el proyecto consta de tres partes: la programación gráfica de un dispay, la implementación de un método de datalogging o guardado de datos y la representación de estos a través de la herramienta Matlab. La necesidad de conocer determinados parámetros de la motocicleta en régimen de marcha y el elevado coste de alternativas ya existentes son los factores que motivan el diseño de este sistema. Siendo dicho diseño la antesala de la aplicación práctica como solución viable de ingeniería. A lo largo de este trabajo se expondrán los pasos de desarrollo y los problemas o limitaciones que podría tener esta solución en caso de aplicación práctica en una motocicleta de competición. El prototipo de competición, para el cuál se ha diseñado este sistema de medida y adquisición de datos, es el prototipo USR18 realizado por la escudería de motociclismo de la Escuela Superior de Ingenieros: US-Racing. This paper aims to detail and explain the design and testing of a system for measuring the physical parameters of a racing motorcycle. The project consists of three parts: the graphic programming of a display, the implementation ... This paper aims to detail and explain the design and testing of a system for measuring the physical parameters of a racing motorcycle. The project consists of three parts: the graphic programming of a display, the implementation of a datalogging method and the representation of the data through the Matlab tool. The need to know certain parameters of the motorcycle in while running and the high cost of the existing alternatives are the factors that motivate the design of this system. This design is the prelude to practical application as a feasible engineering solution. Throughout this work, the development steps and the problems or limitations that this solution could have in case of practical application in a competition motorcycle will be exposed. The competition prototype, for which this data acquisition and measurement system has been designed, is the USR18 prototype made by the motorcycle racing team of the Escuela Superior de Ingenieros: US-Racing. |
Citation | Zapata Galafate, F.J. (2020). Diseño de un sistema de medida de parámetros físicos en una motocicleta de competición. (Trabajo Fin de Grado Inédito). Universidad de Sevilla, Sevilla. |
Files | Size | Format | View | Description |
---|---|---|---|---|
TFG-2841-ZAPATA GALAFATE.pdf | 7.697Mb | [PDF] | View/ | |