Article
Effect of heat pretreatment/recarbonation in the Ca-looping process at realistic calcination conditions
Author/s | Valverde Millán, José Manuel
Sánchez Jiménez, Pedro Enrique Pérez Maqueda, Luis Allan |
Department | Universidad de Sevilla. Departamento de Electrónica y Electromagnetismo Universidad de Sevilla. Departamento de Química Inorgánica |
Publication Date | 2014 |
Deposit Date | 2022-06-20 |
Published in |
|
Abstract | Even though an increasing number of pilot-scale plants are demonstrating the potential efficiency of the Ca-looping technology to capture CO2 at a commercial level, a still standing matter of concern is the loss of carbonation ... Even though an increasing number of pilot-scale plants are demonstrating the potential efficiency of the Ca-looping technology to capture CO2 at a commercial level, a still standing matter of concern is the loss of carbonation reactivity of the regenerated CaO by calcination, which is expected to be particularly marked at realistic conditions necessarily implying a high CO2 partial pressure in the calciner. In this work, we address the effect of previously reported strategies for sorbent reactivation, namely heat pretreatment and the introduction of a recarbonation stage before regeneration. Both techniques, either combined or separately, are shown to favor the carbonation reactivity, albeit CaO regeneration is usually carried out at low CO2 partial pressure in lab-scale tests. Novel results reported in this paper show the opposite when the sorbent is regenerated by calcination at high CO2 concentration, which is arguably due to the diverse mechanisms that rule decarbonation depending on the CO2 concentration in the calciner atmosphere. Dynamic and reversible adsorption/desorption of CO2 is thought to govern decarbonation during calcination at high CO2 partial pressure, which would be hindered by the introduction of a recarbonation stage before carbonation. Moreover, carbonation in the fast phase is severely hampered as a result of the marked loss of reactivity of the surface of CaO regenerated under high CO2 partial pressure. On the other hand, heat pretreatment and harsh calcination conditions lead to a notable enhancement of diffusion, which would favor the process efficiency. In these conditions, diffusion controlled carbonation becomes a significant contribution to CaO conversion, which is notably increased by prolonging the carbonation stage. Heat pretreatment allows also reducing the calcination temperature at high CO2 partial pressure while still achieving full decarbonation in short residence times. |
Funding agencies | Junta de Andalucía Ministerio de Economía y Competitividad (MINECO). España |
Project ID. | FQM-5735
TEP-7858 FIS2011-25161 CTQ2011-27626 |
Citation | Valverde Millán, J.M., Sánchez Jiménez, P.E. y Pérez Maqueda, L.A. (2014). Effect of heat pretreatment/recarbonation in the Ca-looping process at realistic calcination conditions. Energy & Fuels, 28 (6), 4062-4067. |
Files | Size | Format | View | Description |
---|---|---|---|---|
Effect of heat pretreatment.pdf | 324.5Kb | [PDF] | View/ | |