Buscar
Mostrando ítems 1-7 de 7
Artículo
Toughening of complete solid solution cermets by graphite addition
(Elsevier, 2015)
(Ti0.95Ta0.05)(C0.5N0.5)-Co complete solid solution cermets (CSCs) were developed by a mechanochemical synthesis process and a pressureless sintering method. The effect of different percentages of graphite used as a sintering ...
Artículo
Surface modification of Ti-6Al-4V alloys manufactured by selective laser melting: Microstructural and tribo-mechanical characterization
(Elsevier, 2018)
Medical grade of both titanium (Ti) and Ti6Al4V alloy are recognized as the metallic biomaterials with the better outcomes for clinical repair of bone tissue thanks to their suitable mechanical properties and corrosion ...
Artículo
Diseño, procesado y caracterización, procesado y caracterización de materiales con porosidad radial controlada para aplicaciones nucleares
(Grupo Español de Fractura, 2015)
Las pastillas de combustible irradiado presentan un gradiente de porosidad radial como consecuencia de la presencia de gas He y otros productos de fisión que modifican su microestructura. El óxido de Cerio, CeO2, ha ...
Artículo
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta)(C,N)-based cermets
(Elsevier, 2013)
Complete solid-solution cermets based on titanium-tantalum carbonitride using a starting nominal composition with 80 wt.% of (Ti0.8Ta 0.2)(C0.5N0.5) and 20 wt.% of Co were performed by pressure-less sintering at 1550 C for ...
Artículo
Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions
(Elsevier, 2014)
Titanium-tantalum carbonitride, (Ti, Ta)(C, N), based cermets with different Ti and Ta contents were prepared using a mechanically induced self-sustaining reaction and then densified using a pressureless sintering process. ...
Artículo
Influence of temperature on the biaxial strength of cemented carbides with different microstructures
(Elsevier, 2018)
The effect of the temperature on the mechanical strength of WC-Co cemented carbides with different microstructures (grain size and binder content) was evaluated. Biaxial flexural tests were performed on three cemented ...
Artículo
Processing and characterisation of cermet/hardmetal laminates with strong interfaces
(Elsevier, 2014)
Cemented carbides and cermets are potential materials for high speed machining tools. However, cemented carbides are not chemically stable at high temperature and cermets present poor fracture toughness. Novel cermet/hardmetal ...