Ingeniería y Ciencia de los Materiales y del Transporte
Collections in this community
Recent Submissions
-
Influence of Successive Chemical and Thermochemical Treatments on Surface Features of Ti6Al4V Samples Manufactured by SLM [Article]
(MDPI, 2021-02)Ti6Al4V samples, obtained by selective laser melting (SLM), were subjected to successive treatments: acid etching, chemical ...
-
A Track Geometry Measuring System Based on Multibody Kinematics, Inertial Sensors and Computer Vision [Article]
(MDPI, 2020-01)This paper describes the kinematics used for the calculation of track geometric irregularities of a new Track Geometry ...
-
Environmental Impact of Nanoparticles’ Application as an Emerging Technology: A Review [Article]
(MDPI, 2020-12)The unique properties that nanoparticles exhibit, due to their small size, are the principal reason for their numerous ...
-
Fabrication and characterization of superficially modified porous dental implants [Article]
(Elsevier, 2021-02)Stress-shielding and loosening compromise the success of dental implants under real-life service conditions. This work ...
-
Biocompatibility and Cellular Behavior of TiNbTa Alloy with Adapted Rigidity for the Replacement of Bone Tissue [Article]
(MDPI, 2121-01)In this work, the mechanical and bio-functional behavior of a TiNbTa alloy is evaluated as a potential prosthetic biomaterial ...
-
Synthesis and deposition of silver nanoparticles on porous titanium substrates for biomedical applications [Article]
(Elsevier, 2021-01)Ti implants are highly biocompatible and allow orderly bone growth but, unfortunately, in the first five years after ...
-
Synthesis and Characterization of Pd over Novel TiO2 Mixtures: Insights on Metal–Support Interactions [Article]
(MDPI, 2020)Palladium nanoparticles were supported on unusual mixtures of anatase, TiO2 (II) and rutile titania phases by wet ...
-
Effect of processing parameters on the properties of freeze-cast Ni wick with gradient porosity [Article]
(2020-12-06)Wicks are the main component of Loop Heat Pipe systems, whereby coolant liquid flow through their porous structure. They ...
-
Purcell Enhancement and Wavelength Shift of Emitted Light by CsPbI3 Perovskite Nanocrystals Coupled to Hyperbolic Metamaterials [Article]
(ACS Publications, 2020)Manipulation of the exciton emission rate in nanocrystals of lead halide perovskites (LHPs) was demonstrated by means of ...
-
Fabrication and characterization of Ag- and Ga-doped mesoporous glass-coated scaffolds based on natural marine sponges with improved mechanical properties [Article]
(Wiley Periodicals, 2020-10)Natural marine sponges were used as sacrificial template for the fabrication of bioactive glassbased scaffolds. After ...
-
Effect of processing atmosphere and secondary operations on the mechanical properties of additive manufactured AISI 316L stainless steel by Plasma Metal Deposition [Article]
(MDPI, 2020-08)Plasma metal deposition (PMD) is an interesting additive technique whereby diverse materials can be employed to produce ...
-
Characterization and Monitoring of Titanium Bone Implants with Impedance Spectroscopy [Article]
(MDPI, 2020-08)Porous titanium is a metallic biomaterial with good properties for the clinical repair of cortical bone tissue, although ...
-
Use of Impedance Spectroscopy for the Characterization of In-Vitro Osteoblast Cell Response in Porous Titanium Bone Implants [Article]
(MDPI, 2020-08)The use of titanium implants with adequate porosity (content, size and morphology) could solve the stress shielding ...
-
Surface Modification of Porous Titanium Discs Using Femtosecond Laser Structuring [Article]
(MDPI, 2020-06)The failure of titanium implants is associated with two main problems that include the bone resorption and fracture of the ...
-
Porous titanium substrates coated with a bilayer of bioactive glasses [Article]
(Elsevier, 2020-09)Porous titanium substrates coated by dripping-sedimentation technique with a novel bilayer of (45S5 / 1393) bioactive ...
-
(S)TEM structural and compositional nanoanalyses of chemically synthesized glutathione-shelled nanoparticles [Article]
(Springer Verlag, 2020)This work is focused on the characterization by transmission and scanning–transmission electron microscopy-related techniques ...
-
Influence of the Test Configuration and Temperature on the Mechanical Behaviour of WC-Co [Article]
(MDPI, 2020-02)In this work, the effect of the test configuration and temperature on the mechanical behaviour of cemented carbides ...
-
Crystallization Process and Microstructural Evolution of Melt Spun Al-RE-Ni-(Cu) Ribbons [Article]
(MDPI, 2020-03)The crystallization process, both at the initial and subsequent stages, of amorphous Al88-RE4-Ni8 alloys (RE = Y, Sm and ...
-
Influence of processing parameters on the conduct of electrical resistance sintering of iron powders [Article]
(MDPI, 2020-04)The influence of the applied pressure and electrical parameters on the macrostructure of specimens consolidated by the ...
-
Nickel Porous Compacts Obtained by Medium-Frequency Electrical Resistance Sintering [Article]
(MDPI, 2020-05)A commercially pure (c.p.) nickel powder was consolidated by Medium-Frequency Electrical Resistance Sintering (MF-ERS). ...