Buscar
Mostrando ítems 1-10 de 14
Artículo
Fracture toughness of cemented carbides obtained by electrical resistance sintering
(Elsevier, 2019)
The unique combination of hardness, toughness and wear resistance exhibited by WC-Co cemented carbides (hardmetals) has made them a preeminent material choice for extremely demanding applications, such as metal cutting/forming ...
Artículo
Consolidación de polvo de hierro mediante sinterización por resistencia eléctrica
(Editorial CSIC, 2003-04)
Se describe y analiza una modalidad de prensado en caliente, en la que la masa de polvo sometida a compresión se calienta simultáneamente por el paso de una corriente de elevada intensidad. Las experiencias se han realizado ...
Artículo
Influence of processing parameters on the conduct of electrical resistance sintering of iron powders
(MDPI, 2020-04)
The influence of the applied pressure and electrical parameters on the macrostructure of specimens consolidated by the medium-frequency electrical resistance sintering technique (MF-ERS) is analysed in this work. This ...
Artículo
Production of Ultrafine Grained Hardmetals by Electrical Resistance Sintering
(MDPI, 2019-02)
In this work, powders of cemented ultrafine WC-6 wt.% Co were consolidated. The feasibility of the medium frequency electrical resistance sintering (MF-ERS) technique were studied to prevent WC grain growth during ...
Artículo
Modelling and Simulation of the Electrical Resistance Sintering Process of Iron Powders
(Korean Institute of Metals and Materials, 2020-07)
In this paper, the process known as Electrical Resistance Sintering under Pressure is modelled, simulated and validated. This consolidation technique consists of applying a high-intensity electrical current to a metallic ...
Artículo
Nickel Porous Compacts Obtained by Medium-Frequency Electrical Resistance Sintering
(MDPI, 2020-05)
A commercially pure (c.p.) nickel powder was consolidated by Medium-Frequency Electrical Resistance Sintering (MF-ERS). In this consolidation technique, a pressure and the heat released by a high-intensity and low-voltage ...
Artículo
Obtención y procesado de aleaciones de grano ultrafino, nanométrico y amorfas mediante aleado mecánico
(Centro nacional de Investigaciones Metalurgicas, 2007)
El Grupo de Metalurgia e Ingeniería de los Materiales de la Universidad de Sevilla ha desarrollado, durante los últimos quince años, diversas técnicas para la consolidación de aleaciones de aluminio obtenidas por aleado ...
Artículo
Amorphous Al-Ti Powders Prepared by Mechanical Alloying and Consolidated by Electrical Resistance Sintering
(MDPI, 2019-10)
A novel processing method for amorphous Al50Ti50 alloy, obtained by mechanical alloying and subsequently consolidated by electrical resistance sintering, has been investigated. The characterisation of the powders and the ...
Artículo
Consolidation by MF-ERS of mechanically alloyed Al powder
(Elsevier, 2019-07)
The aim of this work is to study the viability of producing, by medium-frequency electrical resistance sintering (MF-ERS), compacts from mechanically alloyed aluminium powders. The MF-ERS process was carried out using ...
Artículo
Simulation of the Electrical Resistance Sintering of Hardmetal Powders
(Korean Institute of Metals and Materials, 2021)
The simulation of the electrical resistance sintering (ERS) of hardmetal powders has been studied. The ERS process can produce a quick consolidation of electrical conductive powders by the simultaneous application of ...