- idUS
- Investigación
- Ingeniería y Arquitectura
- Ingeniería Mecánica y de Fabricación
- Artículos (Ingeniería Mecánica y de Fabricación)
- Listar Artículos (Ingeniería Mecánica y de Fabricación) por autor
Listar Artículos (Ingeniería Mecánica y de Fabricación) por autor "Escalona Franco, José Luis"
Mostrando ítems 1-17 de 17
-
Artículo
A Track Geometry Measuring System Based on Multibody Kinematics, Inertial Sensors and Computer Vision
Escalona Franco, José Luis; Urda Gómez, Pedro; Muñoz Moreno, Sergio (MDPI, 2020-01)This paper describes the kinematics used for the calculation of track geometric irregularities of a new Track Geometry ...
-
Artículo
Advances in the modeling and dynamic simulation of reeving systems using the arbitrary Lagrangian–Eulerian modal method
Escalona Franco, José Luis; Mohammadi, Narges (Springer, 2022)This paper presents new advances in the arbitrary Lagrangian–Eulerian modal method (ALEM) recently developed for the ...
-
Artículo
An alternative procedure to measure railroad track irregularities. Application to a scaled track
Fernández Aceituno, Javier; Chamorro Moreno, Rosario; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2019-04)In this paper an alternative procedure to accurately measure static railroad track irregularities is proposed and applied ...
-
Artículo
An analytical solution of the rope-sheave contact in static conditions based on a bristle model
Escalona Franco, José Luis (Elsevier, 2023-03)This paper presents an analytical solution for the rope-sheave contact problem in static conditions, also applicable to ...
-
Artículo
Application and Experimental Validation of a Multibody Model with Weakly Coupled Lateral and Vertical Dynamics to a Scaled Railway Vehicle
Urda Gómez, Pedro; Muñoz Moreno, Sergio; Aceituno, Francisco J.; Escalona Franco, José Luis (MDPI, 2020)In this paper, a multibody dynamic model of a railway vehicle that assumes that vertical and lateral dynamics are weakly ...
-
Artículo
Comparison of numerical and computational aspects between two constraint-based contact methods in the description of wheel/rail contacts
Yu, Xinxin; Aceituno, Javier F.; Kurvinen, Emil; Rouvinen, Asko; Matikainen, Marko K.; Korkealaakso, Pasi; Jiang, Dezhi; Escalona Franco, José Luis; Mikkola, Aki M. (Springer Science and Business Media B.V., 2022-03)The numerical and computation aspects of the Knife-edge Equivalent Contact (KEC) constraint and lookup table (LUT) methods ...
-
Artículo
Design and manufacture of a scaled railway track with mechanically variable geometry
Chamorro Moreno, Rosario; Fernández Aceituno, Javier; Urda Gómez, Pedro; Pozo, Enrique del; Escalona Franco, José Luis (Nature, 2022)The objective of this article is to present the design and manufacture of a scaled railroad track to be used as a laboratory ...
-
Artículo
Estimation of Lateral Track Irregularity through Kalman Filtering Techniques
Muñoz Moreno, Sergio; Ros, J.; Urda Gómez, Pedro; Escalona Franco, José Luis (2021)The aim of this work is to develop a model-based methodology for monitoring lateral track irregularities based on the use ...
-
Artículo
Experimental measurement of track irregularities using a scaled track recording vehicle and Kalman filtering techniques
Muñoz Moreno, Sergio; Urda Gómez, Pedro; Escalona Franco, José Luis (Academic Press, 2022)The actual trend of railway industry on track surveying is heading up the development of fast automated methods for ...
-
Artículo
Formualción espacial de sistemas multicuerpo con sólidos rígidos y flexibles mediante coordenadas absolutas
García Vallejo, Daniel; Mayo Núñez, Juana María; Escalona Franco, José Luis; Domínguez Abascal, Jaime (Asociación española de ingeniería mecánica, 2004)El uso de matrices de masa constante en mecanismos rígidos-flexibles de barras da lugar a ecuaciones en las que no aparecen ...
-
Artículo
Formulación dinámica de mecanismos flexibles en coordenadas nodales absolutas
Escalona Franco, José Luis; Mayo Núñez, Juana María; Domínguez Abascal, Jaime (Asociación española de ingeniería mecánica, 1998)En esta investigación se presenta una nueva formulación de elementos finitos que puede ser utilizada para análisis de ...
-
Artículo
Measurement of railroad track irregularities using an automated recording vehicle
Urda Gómez, Pedro; Fernández Aceituno, Javier; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2021-10)This paper presents the design, construction and experimental validation of a scaled railway vehicle for the automated and ...
-
Artículo
Modeling viscous damping for transverse oscillations in reeving systems using the Arbitrary Lagrangian–Eulerian Modal approach
Orzechowski, Grzegorz; Escalona Franco, José Luis; Dmitrochenko, Oleg; Mohammadi, Narges; Mikkola, Aki M. (Elsevier, 2022)This paper contributes to a recently proposed Arbitrary Lagrangian–Eulerian Modal (ALEM) approach that makes it possible ...
-
Artículo
Real-time explicit co-simulation of wire-rope systems for industrial mobile harbor cranes
Mohammadi, Narges; Rouvinen, Asko; Korkealaakso, Pasi; Escalona Franco, José Luis (Springer, 2024)This paper presents an investigation into the real-time explicit co-simulation of mobile harbor cranes under hoisting ...
-
Artículo
Real-Time Measurement of Track Irregularities Using an Instrumented Axle and Kalman Filtering Techniques
Muñoz Moreno, Sergio; Urda Gómez, Pedro; Yu, Xinxin; Mikkola, Aki; Escalona Franco, José Luis (American Society of Mechanical Engineers (ASME), 2023-11)A model-based methodology for the estimation of both lateral and vertical track irregularities is presented. This methodology, ...
-
Artículo
The explanation of two semi-recursive multibody methods for educational purpose
Yu, Xinxin; Mikkola, Aki M.; Pan, Yongjun; Escalona Franco, José Luis (Elsevier, 2022-09)In this paper, two often-employed alternatives to the semi-recursive method are described and compared in terms of velocity ...
-
Artículo
Track frame approach for heading and attitude estimation in operating railways using on-board MEMS sensor and encoder
Briales Palacios, Eduardo; Urda Gómez, Pedro; Escalona Franco, José Luis (Elsevier, 2021-07)In this work, the orientation of a railway is estimated with a novel methodology based on multibody system kinematics ...