• Article
  

  Effect of rolling on fretting fatigue assessment of cylindrical contact in partial slip regime 

  Vantadori, Sabrina; Zanichelli, Andrea; Erena Guardia, Diego; Vázquez Valeo, Jesús (Elsevier, 2023)

  The present research work deals with the fatigue assessment of an Al 7075-T651 subjected to fretting fatigue testing ...

• Article
  

  Transport and acceleration mechanism of fast ions during edge localized modes in ASDEX Upgrade 

  Rivero Rodriguez, Juan Francisco; Galdón Quiroga, Joaquín; Domínguez-Palacios Durán, Jesús José; García Muñoz, Manuel; García Vallejo, Daniel; Gonzalez Martin, Javier; Velarde Gallardo, Lina; Viezzer, Eleonora (IOP Publishing, 2023)

  Observations of enhanced fast-ion losses during edge localized modes (ELMs) have been reported in the ASDEX Upgrade tokamak, ...

• Article
  

  Calculations of biaxial fatigue limits with models using the experimental crack direction 

  Chaves Repiso, Víctor Manuel; Balbín Molina, José Antonio; Navarro Robles, Alfredo; Susmel, Luca; Taylor, David (Elsevier, 2023)

  Several models from the literature were used to predict the fatigue limit in notched components subjected to biaxial cyclic ...

• Article
  

  Experimental study on the fretting fatigue of Inconel 718 superalloy 

  Moreno-Rubio, María; Vázquez Valeo, Jesús; Navarro Pintado, Carlos; Domínguez Abascal, Jaime (Elsevier, 2023)

  Fretting fatigue is a surface damage phenomenon appearing in mechanical assemblies subjected to time-varying contact ...

• Article
  

  A comprehensive methodology to obtain electrical analogues of linear mechanical systems 

  López Martínez, Javier A.; García Vallejo, Daniel; Alcayde García, Alfredo; Sánchez Salinas, Silvia; Montoya, Francisco G. (Elsevier, 2023)

  Electrical analogues of linear mechanical systems have traditionally been obtained using a set of rules that can potentially ...

• Article
  

  The effect of geometry on fretting fatigue test results in Al7075-t651 specimens with cylindrical contact 

  Martín, Vicente; Erena Guardia, Diego; Vázquez Valeo, Jesús; Navarro Pintado, Carlos; Domínguez Abascal, Jaime (Elsevier, 2023)

  Fretting fatigue is a material damage phenomenon that produces damage on the contact surface, such as wear and surface ...

• Article
  

  Analysis and design of the central stack for the SMART tokamak 

  Segado Fernández, Jorge; Mancini, Alessio; García Domínguez, Javier; Ayllón Guerola, Juan Manuel; Cruz Zabala, Diego José; Velarde Gallardo, Lina; García Muñoz, Manuel; Viezzer, Eleonora; Navarro Pintado, Carlos; Agredano Torres, Manuel; Vicente Torres, P. (Elsevier, 2023)

  The SMall Aspect Ratio Tokamak (SMART) is a new spherical machine that is currently under construction at the University ...

• Article
  

  Sommerfeld effect in a vibrocompaction process 

  González-Carbajal, Javier; García Vallejo, Daniel; Domínguez Abascal, Jaime (Elsevier, 2023)

  This study addresses the influence of the Sommerfeld effect on the behaviour of vibrocompacting machines driven by ...

• Article
  

  Numerical Simulations of the Low-Velocity Impact Response of Semicylindrical Woven Composite Shells 

  Ferreira, Luis Miguel Marques; Coelho, Carlos A.C.P.; Reis, Paulo Nobre Balbis (MDPI, 2023-05)

  This paper presents an efficient and reliable approach to study the low-velocity impact response of woven composite shells ...

• Article
  

  Effect of surface treatment on the fatigue strength of additive manufactured TI6AL4V alloy 

  Navarro Pintado, Carlos; Vázquez Valeo, Jesús; Domínguez Abascal, Jaime; Periñán, Antonio; García Herrera, Marta; Lasagni, Fernando Adrián; Bernarding, Simon; Slawik, Sebastian; Mücklich, Frank; Boby, Francisco; Hackel, Lloyd (GRUPPO ITALIANO FRATTURA, 2020)

  Different alloys can be used for Additive Manufacturing (AM) with good structural strength. Among the titanium alloys, ...

• Article
  

  The explanation of two semi-recursive multibody methods for educational purpose 

  Yu, Xinxin; Mikkola, Aki M.; Pan, Yongjun; Escalona Franco, José Luis (Elsevier, 2022-09)

  In this paper, two often-employed alternatives to the semi-recursive method are described and compared in terms of velocity ...

• Article
  

  Design and manufacture of a scaled railway track with mechanically variable geometry 

  Chamorro Moreno, Rosario; Fernández Aceituno, Javier; Urda Gómez, Pedro; Pozo, Enrique del; Escalona Franco, José Luis (Nature, 2022)

  The objective of this article is to present the design and manufacture of a scaled railroad track to be used as a laboratory ...

• Article
  

  An analytical solution of the rope-sheave contact in static conditions based on a bristle model 

  Escalona Franco, José Luis (Elsevier, 2023-03)

  This paper presents an analytical solution for the rope-sheave contact problem in static conditions, also applicable to ...

• Article
  

  Electron Cyclotron stray radiation detector studies for JT-60SA 

  Moro, Alessandro; Ayllón Guerola, Juan Manuel; Figini, Lorenzo; Garavaglia, Saul; Kajiwara, Ken; Kobayashi, Takayuki; Piccinni, Carla; Simonetto, Alessandro; Sozzi, Carlo; Urano, H.; Yoshida, M. (Elsevier, 2023-06)

  Most of the present and future magnetic fusion devices rely on high power mm-waves injection for a variety of applications ...

• Article
  

  First measurements of a scintillator-based fast-ion loss detector in reversed Ip/Bt at the ASDEX Upgrade tokamak 

  Hidalgo Salaverri, Javier; Rueda Rueda, José; Galdón Quiroga, Joaquín; Cano Megías, Pilar; Viezzer, Eleonora; García Domínguez, Javier; Oyola Domínguez, Pablo; Ayllón Guerola, Juan Manuel; García Muñoz, Manuel; Happel, T. (Elsevier, 2023-08)

  Fast-α losses in future fusion power plants are expected to follow the co- and counter-current directions due to the ...

• Article
  

  Spatio-temporal simulations of bone remodelling using a bone cell population model based on cell availability 

  Calvo Gallego, José Luis; Manchado Morales, Pablo; Pivonka, Peter; Martínez Reina, Francisco Javier (Frontiers, 2023)

  Here we developed a spatio-temporal bone remodeling model to simulate the action of Basic Multicelluar Units (BMUs). This ...

• Article
  

  On the effective peek application for customized cranio-maxillofacial prostheses: An experimental formability analysis 

  Rosa-Sainz, Ana; García Romeu, María Luisa; Ferrer Real, Inés; Silva, María Beatriz; Centeno Báez, Gabriel (Elsevier, 2023)

  Single Point Incremental Forming (SPIF) is a dieless and flexible forming technology that allows performing complex shapes ...

• Article
  

  An efficient and accurate linearization approach for hydraulically actuated multibody systems with holonomic and nonholonomic constraints 

  García-Agúndez Blanco, Alfonso; García Vallejo, Daniel; Freire Macías, Emilio; Pyrhönen, Lauri; Mikkola, Aki M. (Springer, 2023-03)

  Hydraulics is often used to actuate mechanisms in the applications of heavy machinery. In this work, a linearization ...

• Article
  

  Analytical 1D transfer functions for layered soils 

  García Suárez, Joaquín; González-Carbajal, Javier; Asimaki, Domniki (Elsevier, 2022-12)

  Transfer functions are constantly used in both Seismology and Geotechnical Earthquake Engineering to relate seismic ground ...

• Article
  

  First absolute measurements of fast-ion losses in the ASDEX Upgrade tokamak 

  Rodríguez Ramos, Mauricio; García Muñoz, Manuel; Jiménez Ramos, María del Carmen; García López, Francisco Javier; Galdón Quiroga, Joaquín; Sanchís Sánchez, Lucía; Ayllón Guerola, Juan Manuel; Faitsch, M.; González Martín, Javier; Hermann, Andreas; Marne, P. De; Rivero Rodríguez, Juan Francisco; Sieglin, B.; Snicker, Antti (Institute of Physics Publishing, 2017)

  A new diagnostic technique that allows to obtain absolute fluxes of fast-ion losses measured with absolutely calibrated ...

View more