Recent Submissions

  • Icon

    Continuum Modeling and Simulation in Bone Tissue Engineering  [Article]

    Sanz Herrera, José Antonio; Reina Romo, Esther (MDPI, 2019-09)
    Bone tissue engineering is currently a mature methodology from a research perspective. Moreover, modeling and simulation of involved processes and phenomena in BTE have been proved in a number of papers to be an excellent ...
  • Icon

    Wheel-rail contact force measurement. A comparison between distance laser and strain gauges measuring technology  [PhD Thesis]

    Urda Gómez, Pedro (2019-12-13)
    The development of this PhD thesis is focus on the wheel/rail contact force measurement on a 1 : 10 scaled railway vehicle. To that end, the author has designed and manufactured a dynamometric wheelset instrumented with ...
  • Icon

    Paliativo frente a la fatiga por fretting y análisis del proceso de fatiga en cordones metálicos  [PhD Thesis]

    Erena Guardia, Diego (2019)
    El fallo de cables de acero es comúnmente producido por el fenómeno de la fatiga. Para analizar el fallo por fatiga en este tipo de elementos, un nuevo equipo de ensayos ha sido diseñado, fabricado y validado. Uno de los ...
  • Icon

    Fretting-Fatigue Analysis of Shot-Peened Al 7075-T651 Test Specimens  [Article]

    Martín, Vicente; Vázquez Valeo, Jesús; Navarro Pintado, Carlos; Domínguez Abascal, Jaime (MDPI AG, 2019-05)
    Shot peening is a mechanical treatment that induces several changes in the material: surface roughness, increased hardness close to the surface, and, the most important, compressive residual stresses. This paper analyzes ...
  • Icon

    On the Analysis of the Contact Conditions in Temporomandibular Joint Prostheses  [Article]

    González-Pérez-Somarriba, B.; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo; González Pérez, Luis Miguel (Hindawi Limited, 2018-04)
    Temporomandibular joint replacement (TMJR) is a complex surgical procedure in which the artificial joints available must assure the anatomical reconstruction and guarantee a good range of the natural temporomandibular joint ...
  • Icon

    Análisis del shot peening como paliativo en fatiga por fretting  [PhD Thesis]

    Martín Rodríguez, Vicente (2019-06-11)
    La fatiga por fretting es un tipo especial de fatiga que se produce en las superficies de contacto de uniones mecánicas tales como uniones atornilladas, uniones roblonadas, álabes de turbinas, uniones de ejes, cables ...
  • Icon

    Monitorización de estructuras aeroespaciales y análisis de técnicas de integración de sensores de BRAGG.  [PhD Thesis]

    Fernández Valderas, Rosario (2018-12-19)
    La presente tesis doctoral tiene como objetivos el estudio y desarrollo de la tecnología de los sensores de Bragg para la monitorización estructural, evaluando sus principales limitaciones y deficiencias que impiden su ...
  • Icon

    Analysis of single stage SPIF process applied to the hole flanging operation.  [PhD Thesis]

    Borrego Puche, Marcos (2018-11-09)
    Tradicionalmente, las operaciones de rebordeado se llevan a cabo en la industria mediante técnicas de prensado convencionales utilizando punzón y troquel. Sin embargo, investigaciones recientes en conformado incremental ...
  • Icon

    Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming  [Presentation]

    Morales-Palma, Domingo; Borrego Puche, Marcos; Martínez Donaire, Andrés Jesús; López Fernández, José Andrés; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Institute of Physics Publishing, 2018-08)
    Incremental sheet forming is a novel technology that has significant benefits compared to conventional forming. However, it is a time-consuming process that is usually carried out in several forming stages to homogenize ...
  • Icon

    Experimental and numerical analysis of the flanging process by SPIF  [Presentation]

    López Fernández, José Andrés; Centeno Báez, Gabriel; Martínez Donaire, Andrés Jesús; Morales-Palma, Domingo; Vallellano Martín, Carpóforo (Institute of Physics Publishing, 2018-08)
    This paper analyses the flangeability of AA2024-T3 sheets using single point incremental forming (SPIF). With this purpose, a series of process parameters is considered including flange length and width, tool radius and ...
  • Icon

    Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes  [Presentation]

    Centeno Báez, Gabriel; Martínez Donaire, Andrés Jesús; Vallellano Martín, Carpóforo; Martínez Palmeth, Luis Humberto; Morales-Palma, Domingo; Suntaxi, C.; García-Lomas Jung, Francisco Javier (Elsevier, 2013)
    In this paper the formability of AA2024-T3 metal sheets is experimentally analyzed. For this purpose, a series of StretchBending and Incremental Sheet Forming (ISF) tests are carried out. The former tests allow determine ...
  • Icon

    Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming  [Presentation]

    Silva, M. B.; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Morales-Palma, Domingo; Vallellano Martín, Carpóforo; Martins, P.A.F (Elsevier, 2015)
    Forming limit diagrams (FLD’s) are used to evaluate the workability of metal sheets. FLD’s provide the failure locus at which plastic instability occurs and localized necking develops (commonly designated as the forming ...
  • Icon

    On the study of the single-stage hole-flanging process by SPIF  [Presentation]

    Borrego Puche, Marcos; Morales-Palma, Domingo; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2015)
    Recent studies show the capability of single-point incremental forming to perform successfully hole-flanging operations using multi-stage strategies. The aim of this work is to investigate the ability of the SPIF process ...
  • Icon

    Recent Approaches for the Manufacturing of Polymeric Cranial Prostheses by Incremental Sheet Forming  [Presentation]

    Centeno Báez, Gabriel; Bagudanch, Isabel; Morales-Palma, Domingo; García-Romeu, M.L.; González-Pérez-Somarriba, B.; Martínez Donaire, Andrés Jesús; González-Pérez, L.M.; Vallellano Martín, Carpóforo (Elsevier, 2017)
    This paper presents recent research experiences developed with the aim of manufacturing cranial prostheses in polymeric sheet using Incremental Sheet Forming (ISF) technologies. With this purpose, different approaches have ...
  • Icon

    Numerical explicit analysis of hole flanging by single-stage incremental forming  [Presentation]

    Martínez Donaire, Andrés Jesús; Morales-Palma, Domingo; Caballero, A.; Borrego, M.; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2017-06)
    The use of Single-Point Incremental Forming (SPIF) technology in hole flanging operations using multi-stages strategies have been widely studied in the last few years. However, these strategies are very time-consuming, ...
  • Icon

    Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF  [Presentation]

    Morales-Palma, Domingo; Borrego Puche, Marcos; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2017-06)
    A drawback of the hole-flanging process by single-stage SPIF is the non-uniform thickness obtained along the flange. Multi-stage strategies have been used to improve it, however they increase notably the manufacturing time. ...
  • Icon

    Beam-Ion Acceleration during Edge Localized Modes in the ASDEX Upgrade Tokamak  [Article]

    Galdón-Quiroga, J.; García Muñoz, Manuel; McClements, K.G.; Nocente, M.; Hoelzl, M.; Jacobsen, A.S.; Orain, F.; Ribero-Rodríguez, J.F.; Salewski, M.; Sanchis-Sánchez, L.; Suttrop, W.; Viezzer, Eleonora (American Physical Society, 2018-07)
    The acceleration of beam ions during edge localized modes (ELMs) in a tokamak is observed for the first time through direct measurements of fast-ion losses in low collisionality plasmas. The accelerated beamion population ...
  • Icon

    Dinámica de sistemas multicuerpo rígido-flexible en coordenadas absolutas  [PhD Thesis]

    García Vallejo, Daniel (2006)
  • Icon

    SDR: Las radios definidas por software requieren pruebas avanzadas  [Article]

    Mees, J.; Ojeda, Juan (Ediciones Técnicas REDE, 2008)
    Hoy en día y más que antes, las tecnologías de radio frecuencia (RF) se están desarrollando para su adaptación - adaptación a un espectro de RF muy poblado - a los diversos requisitos de la red y a los cambios en las ...
  • Icon

    Parametric analysis of gravity offshore structures: Part 1  [Article]

    Domínguez Abascal, Jaime; Alarcón Álvarez, Enrique (Elsevier, 1981)
    The objective of this paper is to analyse the influence of the variation of some parameters used in the analysis of the dynamic response of offshore structures under the action of wind generated waves. The structural ...

View more