Final Degree Project
Modelado de sistemas de bombeo electrohidrodinámico de líquidos por conducción
Author/s | Lozano Ortega, Ricardo |
Director | Vázquez González, Pedro Ángel |
Department | Universidad de Sevilla. Departamento de Física Aplicada III |
Publication Date | 2020 |
Deposit Date | 2021-02-05 |
Academic Title | Universidad de Sevilla. Grado en Ingeniería Aeroespacial |
Abstract | En este trabajo se ha realizado un modelo de bomba de conducción electrohidrodinámica de
tamaño típico de 0.2mm donde se contemplan las magnitudes del fluido como función de
la temperatura así como se considera la acción ... En este trabajo se ha realizado un modelo de bomba de conducción electrohidrodinámica de tamaño típico de 0.2mm donde se contemplan las magnitudes del fluido como función de la temperatura así como se considera la acción de la fuerza dieléctrica. Se ha implementado en el paquete COMSOL y se ha estudiado la evolución con el campo eléctrico de la estructura espacial de las magnitudes físicas (velocidad, temperatura, carga eléctrica, etc.) así como se ha analizado la evolución de magnitudes globales como la transferencia térmica, la velocidad máxima, etc. en función del campo eléctrico impuesto al sistema. Se demuestra que al contemplar en el fluido utilizado la dependencia con la temperatura no hay cambios apreciables, al menos en la configuración estudiada. Finalmente se observa que la transferencia térmica aumenta hasta un factor 10 con la aplicación del campo eléctrico en el rango de valores estudiado. In this project it has been developed a model of an electrohydrodynamic pump of a typical size of 0.2mm in which the magnitudes of the fluid are function of the temperature and the dielectric force is considered. The ... In this project it has been developed a model of an electrohydrodynamic pump of a typical size of 0.2mm in which the magnitudes of the fluid are function of the temperature and the dielectric force is considered. The software selected in order to compute the simulations has been COMSOL Multiphysics, in which we have studied the evolution of different physical magnitudes such as the velocity field, temperature field, or charge concentration with the electric field, as well as other global magnitudes, for instance the maximum velocity or the heat transfer. It has been demonstrated that the dependence of the fluid’s magnitudes with the temperature do not interfere with the performance of the pump in the current configuration. Finally, it is shown how the heat transfer is increased by a factor of 10 owing to the application of the electric field, in the range of values considered. |
Citation | Lozano Ortega, R. (2020). Modelado de sistemas de bombeo electrohidrodinámico de líquidos por conducción. (Trabajo Fin de Grado Inédito). Universidad de Sevilla, Sevilla. |
Files | Size | Format | View | Description |
---|---|---|---|---|
TFG-3099-LOZANO ORTEGA.pdf | 5.427Mb | [PDF] | View/ | |