Perfil del autor: Gañán-Calvo, Alfonso M.
Datos institucionales
Nombre | Gañán-Calvo, Alfonso M. |
Departamento | Ingeniería Aeroespacial y Mecánica de Fluidos |
Área de conocimiento | Mecánica de Fluidos |
Categoría profesional | Catedrático de Universidad |
Correo electrónico | Solicitar |
Estadísticas
-
Nº publicaciones
134
-
Nº visitas
14431
-
Nº descargas
23287
Publicaciones |
---|
Artículo
The ocean fine spray
(AIP Publishing, 2023)
An important fraction of the atmospheric aerosols comes from the ocean spray originated by the bursting of surface bubbles. ... |
Artículo
The role of charge relaxation in electrified tip streaming
(AIP Publishing, 2023)
We study experimentally and numerically the onset of tip streaming in an electrified droplet. The experiments show that, ... |
Artículo
Effects of geometry in the operation of coaxial electrosprays
(Elsevier, 2023)
Coaxial electrospray is a well established procedure to generate coaxial micro- and nano-structures (microcapsules and ... |
Artículo
An experimental study of liquid micro-jets produced with a gas dynamic virtual nozzle under the influence of an electric field
(Frontiers, 2023)
The results of an experimental study of micro-jets produced with a gas dynamic virtual nozzle (GDVN) under the influence ... |
Artículo
Electrokinetic modelling of cone-jet electrosprays
(Cambridge University Express, 2023)
The physics of electrospray has been subject to an intense debate for three decades regarding the ultimate electrokinetics ... |
Trabajo Fin de Grado
Conos de Taylor Coaxiales: soluciones con emisión de gas.
(2023)
Tratamos de encontrar una solución del problema electrohidrodinámico de los conos de Taylor coaxiales con tres dominios ... |
Artículo
Integrating a micro-mixing mechanism and on-line thermal processing for the large-scale ejection of polymeric liquid threads for producing ultrafine fibers
(Royal Society of Chemistry, 2023)
Micro/nanofibers are structures that nowadays have a wide range of cutting-edge applications including energy generation ... |
Artículo
The high-throughput atomization of polymer solutions for fiber synthesis in a single step aided with corona ionizers
(Nature Publishing, 2023)
Polymer microfibers are ubiquitous structures across virtually all technological fields. Their applications include, for ... |
Artículo
Massive production of fibroin nano-fibrous biomaterial by turbulent co-flow
(Nature Research, 2022)
Among the different polymers (proteins, polysaccharides, etc.) that make up natural fibers, fibroin is a protein produced ... |
Tesis Doctoral
Fluid Mechanics for Biomedical Applications: Weakly Viscoelastic Electrospray, Flow Focusing and Collapsible Channel Models
(2022)
Three different research topics are discussed in this thesis: i) weakly-viscoelastic electrospray, ii) the emergence of ... |
Artículo
Strategies for the Biofunctionalization of Straining Flow Spinning Regenerated Bombyx mori Fibers
(MDPI, 2022)
High-performance regenerated silkworm (Bombyx mori) silk fibers can be produced efficiently through the straining flow ... |
Artículo
Megahertz pulse trains enable multi-hit serial femtosecond crystallography experiments at X-ray free electron lasers
(Springer Nature, 2022)
The European X-ray Free Electron Laser (XFEL) and Linac Coherent Light Source (LCLS) II are extremely intense sources of ... |
Artículo
The complexity of aerosol production from bubble bursting
(National Academy of Sciences (EEUU), 2022)
|
Artículo
On the physics of transient ejection from bubble bursting
(Cambridge University Press, 2021)
Using a dynamical scaling analysis of the flow variables and their evolution due to bubble bursting, here we predict the ... |
Tesis Doctoral
Study of the production of drops and their impact on surfaces. Application to the development of an additive manufacturing technique for metals
(2021)
Drops are constantlyand spontaneouslyproduced in nature, but varied industrial fields (such as biotechnology, chemical ... |
Artículo
On the ejection of filaments of polymer solutions triggered by a micrometer-scale mixing mechanism
(MDPI, 2021)
Polymer filaments constitute precursor materials of so-called fiber mats, ubiquitous structures across cutting-edge ... |
Artículo
Transonic flow focusing: stability analysis and jet diameter
(Elsevier Ltd, 2021)
We study numerically and experimentally the stability of the transonic flow focusing used in serial femtosecond crystallography ... |
Artículo
Diameter and charge of the first droplet emitted in electrospray
(American Institute of Physics Inc., 2021)
The first droplet produced by a low-conductivity pendant/sessile droplet subject to a strong electric field is particularly ... |
Artículo
Electrical Conductivity of a Stretching Viscoelastic Filament
(MDPI, 2021)
Long polymeric chains highly stretched and aligned with the flow confer a strong mechanical anisotropy on a viscoelastic ... |
Artículo
Self-similar electrohydrodynamic solutions in multiple coaxial Taylor cones
(2021)
We calculate analytically the self-similar Stokes flow driven by an externally applied electric field in a multiple coaxial ... |
Artículo
Effect of an axial electric field on the breakup of a leaky-dielectric liquid filament
(American Institute of Physics Inc., 2021)
We study experimentally and numerically the thinning of Newtonian leaky-dielectric filaments subjected to an axial electric ... |
Artículo
Dynamics of formation of poly(vinyl alcohol) filaments with an energetically efficient micro-mixing mechanism
(American Institute of Physics Publishing (AIP), 2020)
We present a pneumatic approach for massive production of poly(vinyl alcohol) (PVA) filaments based on a mixing mechanism ... |
Artículo
Dripping, jetting and tip streaming
(Institute of Physics Publishing, 2020)
Dripping, jetting and tip streaming have been studied up to a certain point separately by both fluid mechanics and ... |
Patente. Invención
Método para producir estructuras alargadas tales como fibras a partir de soluciones poliméricas mediante hilado por flujo deformante
(Oficina Española de Patentes y Marcas (OEPM), 2019)
Un método de auto-ensamblaje molecular, que comprende: - extruir una corriente de una solución de hilado de moléculas ... |
Tesis Doctoral
Forcing microbubbles in microfluidics
(2019)
The present thesis is a compilation of three studies in the field of microfluidic, more concretely, the generation of ... |
Tesis Doctoral |
Artículo
Flow Blurring-Enabled Production of Polymer Filaments from Poly(ethylene oxide) Solutions
(ACS Publications, 2019)
Flow blurring (FB) atomizers are relatively simple yet robust devices used for the generation of sprays from solutions of ... |
Patente. Invención
Aparato y método para mezclar al menos dos líquidos
(Oficina Española de Patentes y Marcas (OEPM), 2019)
Aparato y método para mezclar al menos dos líquidos. Método de mezclado de al menos dos líquidos que incluye proporcionar ... |
Artículo
Aerodynamically stabilized Taylor cone jets
(American Physical Society, 2019)
We introduce a way to produce steady micro/nano-liquid jets via electrohydrodynamic elds together with co- owing gas ... |
Trabajo Fin de Grado
Sistema de Producción de Nanopartículas por Nebulización Neumática en el Entorno del Punto Crítico. Desarrollo y Escalado.
(2019)
Este proyecto es la continuación natural de nuestro Trabajo de Fin de Grado, en el cual ensamblamos, añadimos electrónica ... |
Artículo
Production of regenerated silkworm silk fibers from aqueous dopes through straining flow spinning
(SAGE Publications Ltd, 2019)
The possibility of spinning regenerated silkworm (Bombyx mori) fibers from a range of aqueous dopes by using a biomimetic ... |
Artículo
Flow blurring atomization of Poly(ethylene oxide) solutions below the coil overlap concentration
(Elsevier, 2019)
Atomization of polymer solutions has important technological implications across many fields. Here, we investigated the ... |
Artículo
Nanometre-sized droplets from a gas dynamic virtual nozzle
(International Union of Crystallography, 2019)
This paper reports on improved techniques to create and characterize nanometre-sized droplets from dilute aqueous solutions ... |
Artículo
Scaling Laws of an Exploding Liquid Column under an Intense Ultrashort X-Ray Pulse
(American Physical Society (APS), 2019)
A general formulation of the partial destruction of a liquid object in vacuum after the sudden deposition of a very large ... |
Artículo
Emergence of supercontraction in regenerated silkworm (Bombyx mori) silk fibers
(Nature Publishing Group, 2019)
The conditions required for the emergence of supercontraction in regenerated silkworm (Bombyx mori) silk fibers are assessed ... |
Artículo
Evaluation of serial crystallographic structure determination within megahertz pulse trains
(American Crystallographic Association, 2019)
The new European X-ray Free-Electron Laser (European XFEL) is the first X-ray free-electron laser capable of delivering ... |
Ponencia
The natural breakup length of a steady capillary jet
(Bulletin of the American Physical Society, 2019)
Despite their fundamental and applied importance, a general model to predict the natural breakup length of steady capillary ... |
Artículo
Risk stratifiers for arrhythmic and non-arrhythmic mortality after acute myocardial infarction
(Nature Publishing Group, 2018)
The effective discrimination between patients at risk of Arrhythmic Mortality (AM) and Non-Arrhythmic Mortality (NAM) ... |
Artículo
Megahertz serial crystallography
(Nature Publishing, 2018)
The new European X-ray Free-Electron Laser is the first X-ray free-electron laser capable of delivering X-ray pulses with ... |
Artículo
Straining Flow Spinning of Artificial Silk Fibers: A Review
(MDPI, 2018)
This work summarizes the main principles and some of the most significant results of straining flow spinning (SFS), a ... |
Artículo
Controlled cavity collapse: scaling laws of drop formation
(Royal Society of Chemistry (RSC), 2018)
The formation of transient cavities at liquid interfaces occurs in an immense variety of natural processes, among which ... |
Artículo
Novel swirl flow‑focusing microfluidic device for the production of monodisperse microbubbles
(Springer, 2018)
A novel swirl flow-focusing microfluidic axisymmetric device for the generation of monodisperse microbubbles at high ... |
Artículo
Visualization and size-measurement of droplets generated by Flow Blurring® in a high-pressure environment
(Taylor & Francis, 2018)
Flow Blurring® (FB) atomization is a highly efficient method to produce aerosols. It originates from an unexpected turbulent ... |
Artículo
Rapid sample delivery for megahertz serial crystallography at X-ray FELs
(International Union of Crystallography, 2018)
Liquid microjets are a common means of delivering protein crystals to the focus of X-ray free-electron lasers (FELs) for ... |
Artículo
Pressure-driven filling of liquid metal in closed-end microchannels
(American Physical Society, 2018)
We observe unsteady flow behavior of liquid metal during a pressure-driven injection process into a closed-ended ... |
Artículo
Pressure-Driven Filling of Closed-End Microchannel: Realization of Comb-Shaped Transducers for Acoustofluidics
(American Physical Society, 2018)
We demonstrate the complete filling of both deionized water (DI water) and liquid metal (eutectic gallium-indium, EGaIn) ... |
Artículo
Gañán-Calvo replies
(American Physical Society (APS), 2018)
|
Artículo
Scaling laws of top jet drop size and speed from bubble bursting including gravity and inviscid limit
(American Physical Society (APS), 2018)
Jet droplets from bubble bursting are determined by a limited parametrical space: the liquid properties (surface tension, ... |
Patente. Invención
Un aparato y un método para generar gotas
(Oficina Española de Patentes y Marcas , 2017)
Un aparato (10,70,80) para generar gotas, el aparato (10,70,80) comprende:un distribuidor de líquido (12,72) que comprende ... |
Patente. Invención
Procedimiento para la obtención de datos útiles asociados al patrón de variabilidad de la frecuencia cardiaca
(Oficina Española de Patentes y Marcas , 2017)
La presente invención tiene por objeto un procedimiento para la descripción, representación gráfica e identificación gráfica ... |
Patente. Invención
Producción de chorros capilares viscoelásticos mediante enfocamiento gaseoso
(Oficina Española de Patentes y Marcas , 2017)
Producción de chorros capilares viscoelásticos mediante enfocamiento gaseoso.Se describe un método para la formación de ... |
Artículo
Revision of Bubble Bursting: Universal Scaling Laws of Top Jet Drop Size and Speed
(American Physical Society (APS), 2017)
The collapse of a bubble of radius Ro at the surface of a liquid generating a liquid jet and a subsequent first drop of ... |
Trabajo Fin de Grado
Determinación experimental de la carga eléctrica transportada por las primeras gotas emitidas en la formación de un cono de Taylor
(2017)
El cono-chorro de Taylor es un modo o configuración geométrica de electrospray, en el que la entrefase de la gota generadora ... |
Artículo
Effectiveness of flossing loops in the control of the gingival health
(Medicina Oral Sl, 2017)
Background: One of the key factor in the good condition of periodontal tissues is their daily hygiene. Oral hygiene techniques ... |
Artículo
The onset of electrospray: the universal scaling laws of the first ejection
(Nature Publishing Group, 2016)
The disintegration of liquid drops with low electrical conductivity and subject to an electric field is investigated both ... |
Artículo
The production of viscoelastic capillary jets with gaseous flow focusing
(Elsevier, 2016)
The production of viscoelastic capillary jets with gaseous flow focusing is studied experimentally. In this technique, the ... |
Artículo
Universal structures of normal and pathological heart rate variability
(Nature Publishing Group, 2016)
The circulatory system of living organisms is an autonomous mechanical system softly tuned with the respiratory system, ... |
Artículo
Active droplet generation in microfluidics
(Royal Society of Chemistry, 2016)
The reliable generation of micron-sized droplets is an important process for various applications in droplet-based ... |
Artículo
Automated droplet measurement (ADM): an enhanced video processing software for rapid droplet measurements
(Springer Verlag, 2016)
This paper identifies and addresses the bottlenecks that hamper the currently available software to perform in situ ... |
Artículo
Monosized dripping mode of axisymmetric flow focusing
(American Physical Society (APS), 2016)
We identify and analyze the perfectly regular dripping mode of flow focusing. This mode occurs within narrow intervals of ... |
Trabajo Fin de Grado
Caracterización de micro-bombas para aplicaciones biomédicas. I Caracterización experimental y simulación numérica
(2016)
El objetivo del proyecto es la caracterización completa de una serie de tecnologías de micro-bombeo de fluidos, obtener ... |
Trabajo Fin de Grado
Development and testing of a quantitative heat flux estimation method for geographical surfaces. Application to the Urban Heat Island Effect
(2016)
The purpose of this project is the development and testing of a new geographical surface heat exchange measurement technique. ... |
Artículo
Breakup length of AC electrified jets in a microfluidic flow‑focusing junction
(Springer, 2015)
Electroactuation of liquid-liquid interfaces offers promising methods to actively modulate droplet formation in droplet-based ... |
Patente. Invención
Dispositivo para limpieza interdental y procedimiento para su presentación y uso
(Oficina Española de Patentes y Marcas , 2015)
La presente invención describe un dispositivo para limpieza interdental consistente en un hilo resistente que forma un ... |
Artículo
Electrokinetic effects in the breakup of electrified jets: A Volume-Of-Fluid numerical study
(Elsevier, 2015)
The breakup of a charged liquid column is studied numerically using Volume-OF-Fluid (VOF) for a range of timescales where ... |
Artículo
Acoustofluidic control of bubble size in microfluidic flow-focusing configuration
(Royal Society of Chemistry, 2015)
This paper reports a method to control the bubble size generated in a microfluidic flow-focusing configuration. With an ... |
Patente. Invención
Método y dispositivo para la producción de micro- y nano-burbujas monodispersas
(Oficina Española de Patentes y Marcas , 2014)
El objeto de esta invención es un método y dispositivos para producir microburbujas de tamaño pequeño y uniforme, utilizando ... |
Patente. Invención
Procedimiento y dispositivo para microfabricación y micro-soldadura
(Oficina Española de Patentes y Marcas (OEPM), 2014)
Dispositivo para microfabricación y micro-soldadura mediante deposición de material en fase líquida (1), que comprende dos ... |
Artículo
Spider silk gut: Development and characterization of a novel strong spider silk fiber
(Nature Publishing Group, 2014)
Spider silk fibers were produced through an alternative processing route that differs widely from natural spinning. The ... |
Patente. Invención
Método para el control de la irradiación solar sobre la superficie terrestre mediante la dispersión controlada de aerosoles
(Oficina Española de Patentes y Marcas , 2013)
Método para el control de la irradiación solar sobre la superficie terrestre mediante la dispersión controlada de aerosoles ... |
Patente. Invención
Procedimiento y dispositivo para la monitorización global y control de la eficiencia energética de edificaciones y viviendas.
(Oficina Española de Patentes y Marcas , 2013)
Es objeto de la presente invención un procedimiento y dispositivo globalizado de monitorización de la eficiencia energética ... |
Artículo
Electro-hydrodynamic generation of monodisperse nanoparticles in the sub-10 nm size range from strongly electrolytic salt solutions: governing parameters of scaling laws
(Kluwer Academic Publishers, 2013)
A charge reduced electro-hydrodynamic atomization (EHDA) device has been used to generate airborne salt clusters in the ... |
Artículo
A new flow focusing technique to produce very thin jets
(IOP Publishing Ltd, 2013)
A new technique is proposed in this paper to produce jets, droplets, and emulsions with sizes ranging from tens of microns ... |
Artículo
Absolute and convective instability of a charged viscoelastic liquid jet
(Elsevier, 2013)
The absolute and convective instability of an electrically charged viscoelastic liquid jet is studied. The liquid is assumed ... |
Artículo |
Artículo
On the use of hypodermic needles in electrospray
(EDP Sciences, 2013)
We present an experimental analysis of electrospray where the standard feeding capillary was re placed with a hypodermic ... |
Artículo
Focusing liquid microjets with nozzles
(IOP Publishing Ltd, 2012)
The stability of flow focusing taking place in a converging–diverging nozzle, as well as the size of the resulting microjets, ... |
Artículo
Numerical simulation of electrospray in the cone-jet mode
(American Physical Society, 2012)
We present a robust and computationally efficient numerical scheme for simulating steady electrohydrodynamic atomization ... |
Artículo
Enhancement of the stability of the flow focusing technique for low-viscosity liquids
(IOP Publishing, 2012)
We propose a modified flow focusing configuration to produce low-viscosity microjets at much smaller flow rates than those ... |
Patente. Invención
Procedimiento de producción de biomasa mediante el uso de aerosoles acuosos que contienen microorganismos fotosintéticos.
(Oficina Española de Patentes y Marcas , 2011)
Método de producción de biomasa mediante el uso de aerosoles acuosos que contienen microorganismos fotosintéticos que ... |
Patente. Invención
Metodo para la produccion de micro y nano-burbujas monodispersas mediante co-flujo giratorio
(Oficina Española de Patentes y Marcas , 2011)
Método para la producción de micro- y nano-burbujas monodispersas mediante co-flujo giratorio.El objeto de esta invención ... |
Artículo
Generation of small mono-disperse bubbles in axisymmetric T-junction: The role of swirl
(American Institute of Physics Inc., 2011)
The dynamics of micro-bubble formation in an axisymmetric T-junction for a gas-liquid system is analyzed. The approach ... |
Artículo
Experimental and numerical study of the recirculation flow inside a liquid meniscus focused by air
(Springer-Verlag, 2011)
The internal motions inside a liquid meniscus in the so-called liquid cone-jet mode, which can occur upon stimulation by ... |
Artículo
Application of flow focusing to the break-up of a magnetite suspension jet for the production of paramagnetic microparticles
(2011)
Paramagnetic particles offer an extensive improvement in the magnetic separation or purification of a wide variety of ... |
Artículo
Micrometer glass nozzles for flow focusing
(IOP Publishing Ltd, 2010)
We discuss the use of flame-shaped glass micro-nozzles for ultra-fine liquid atomization by flow focusing (DePonte et al ... |
Patente. Invención
Método de fabricación para dispositivos enfocador de fluido a escala micrometrica
(Oficina Española de Patentes y Marcas , 2009)
Método de fabricación para dispositivo enfocador de fluido a escala micrométrica.El objeto de la presente invención es un ... |
Artículo
Reduction of droplet-size dispersion in parallel flow-focusing microdevices using a passive method
(IOP Publishing Ltd, 2009)
Flow-focusing devices can be used to produce microparticles at low cost, with the added advantage of low dispersion in the ... |
Artículo
Swirl flow focusing: A novel procedure for the massive production of monodisperse microbubbles
(American Institute of Physics, 2009)
volume-of-fluid numerical method is used to predict the dynamics of microbubble formation in an axisymmetric flow-focusing ... |
Patente. Invención
Procedimiento y dispositivo para la generación de espumas y emulsiones mediante flujo bifásico guiado en una matriz porosa
(Oficina Española de Patentes y Marcas (OEPM), 2008)
Procedimiento y dispositivo para la generación de espumas y emulsiones mediante flujo bifásico guiado en una matriz porosa. ... |
Tesis Doctoral
Microencapsulación mediante la tecnología Flow Focusing para aplicaciones biotecnológicas y biomédicas
(2008)
El objetivo principal de este trabajo, ha sido validar y consolidar la tecnología Flow Focusing como una alternativa firme ... |
Patente. Invención
Procedimiento de preparación de partículas de tamaño micro y nanométrico con productos lábiles y partículas obtenidas
(Universidad de Sevilla, 2008)
Procedimiento de preparación de partículas de tamaño micro y nanométrico con productos lábiles y partículas obtenidas. La ... |
Artículo
Liquid flow focused by a gas: Jetting, dripping, and recirculation
(The American Physical Society, 2008)
The liquid cone-jet mode can be produced upon stimulation by a coflowing gas sheath. Most applications deal with the jet ... |
Artículo
Unconditional jetting
(American Physical Society, 2008)
Capillary jetting of a fluid dispersed into another immiscible phase is usually limited by a critical capillary number, a ... |
Artículo
Viscoelastic effects on the jetting–dripping transition in co-flowing capillary jets
(Cambridge University Press, 2008)
Linear hydrodynamics stability analysis is used to determine the influence of elasticity on the jetting–dripping transition ... |
Patente. Invención
Procedimiento y dispositivo para la generación de espumas y emulsiones mediante pares de tubos enfrentados.
(Oficina Española de Patentes y Marcas , 2007)
Procedimiento y dispositivo para la generación de espumas y emulsiones mediante pares de tubos enfrentados.La presente ... |
Patente. Invención
Soporte sólido para la unión y/o síntesis química en fase sólida y procedimiento de utilización
(Oficina Española de Patentes y Marcas (OEPM), 2007)
Soporte sólido para la unión y/o síntesis química en fase sólida y procedimiento de utilización. En la presente invención ... |
Patente. Invención
Procedimiento y dispositivo para la producción de aerosoles líquidos y su uso en espectrometría analítica (atómica y de masas).
(Oficina Española de Patentes y Marcas , 2007)
Procedimiento y dispositivo para la producción de aerosoles líquidos y su uso en espectrometría analítica (atómica y de ... |
Patente. Invención
Procedimiento y dispositivo para la obtención de partículas de tamaño micro y nanométrico
(Oficina Española de Patentes y Marcas (OEPM), 2007)
Procedimiento y dispositivo para la obtención de partículas de tamaño micro y nanométrico. La presente invención está ... |
Patente. Invención
Dispositivo neumatico para la produccion de un aerosol esterilizado mediante vaporizacion parcial.
(Oficina Española de Patentes y Marcas , 2007)
Dispositivo neumático para la producción de un aerosol esterilizado mediante vaporización parcial.El objeto de la presente ... |
Patente. Invención
Procedimiento y dispositivo para impresión por micro-gotas de espuma
(Oficina Española de Patentes y Marcas , 2007)
Procedimiento y dispositivo para impresión por micro-gotas de espuma.La presente invención describe un procedimiento y un ... |
Patente. Invención
Procedimiento y dispositivo de planchado con spray de agua asistido por vapor.
(Oficina Española de Patentes y Marcas , 2007)
Procedimiento y dispositivo de planchado con spray de agua asistido por vapor.La presente invención describe un procedimiento ... |
Patente. Invención
Procedimiento y dispositivo para micro-mezclado de fluidos mediante celula de reflujo.
(Oficina Española de Patentes y Marcas , 2007)
Procedimiento y dispositivo para micro-mezclado de fluidos mediante célula de reflujo.La presente invención describe un ... |
Patente. Invención
Dispositivo y procedimiento para la automatización neumática de líquidos mediante flujo implosivo de gas.
(Oficina Española de Patentes y Marcas , 2007)
Dispositivo y procedimiento para la atomización neumática de líquidos mediante flujo implosivo de gas.Dispositivo y ... |
Artículo
Electro-Flow Focusing: The high-conductivity low-viscosity limit
(The American Physical Society, 2007)
Electro-flow focusing, a technique combining the features of electrospray (ES) and flow focusing (FF), provides a reliable ... |
Patente. Invención
Método y dispositivo de generación de microcorrientes fluidas para laproducción de microburbujas, microgotas, microemulsiones, y microcápsulas
(Oficina Española de Patentes y Marcas , 2006)
Nuevo método de generación de microcorrientes fluidas para la producción de microburbujas, microespumas, microgotas, ... |
Patente. Invención
Procedimiento y dispositivo de dispersión de líquidos insecticidas o fitosanitarios desde aeronaves
(Organización Mundial de la Propiedad Intelectual, 2006)
La presente invención describe un método y un dispositivo de nebulización de líquidos insecticidas y fito-sanitarios en ... |
Patente. Invención
Procedimiento y dispositivo para la identificación y caracterización secuencial de unidades discretas en suspensión en un chorro capilar en régimen de flujo laminar, mediante un sensor óptico o electromagnético.
(Oficina Española de Patentes y Marcas , 2006)
Procedimiento y dispositivo para la identificación y caracterización secuencial de unidades discretas en suspensión en un ... |
Artículo
Bubbling in Unbounded Coflowing Liquids
(The American Physical Society, 2006)
An investigation of the stability of low density and viscosity fluid jets and spouts in unbounded coflowing liquids is ... |
Patente. Invención
Dispositivo generador de burbujas para la reducción de fricción en el casco de embarcaciones
(Organización Mundial de la Propiedad Intelectual, 2005)
Es objeto de la presente invención un dispositivo para la generación de burbujas destinadas a incorporarse principalmente ... |
Patente. Invención
Procedimiento para la fabricación de fibras mediante extrusión con un gas enfocante en régimen subsónico
(Organización Mundial de la Propiedad Intelectual (OMPI), 2005)
El método que se describe en esta invención se aplica a la fabricación de fibras mediante la combinación de dos acciones ... |
Patente. Invención
DIspositivo y procedimiento para la atomización neumática de líquido
(Organización Mundial de la Propiedad Intelectual (OMPI), 2005)
El objeto de la presente invención es un dispositivo y procedimiento de atomización o nebulización de un liquido mediante ... |
Artículo
Linear stability analysis of axisymmetric perturbations in imperfectly conducting liquid jets
(American Institute of Physics, 2005)
A discussion is presented on the role of limited conductivity and permittivity on the behavior of electrified jets. Under ... |
Artículo
Enhanced liquid atomization: From flow-focusing to flow-blurring
(AIP Publishing, 2005)
This letter describes the generation of small turbulence scales in connection with a singular back-flow pattern leading ... |
Artículo
Formation of bubbles and droplets in microfluidic systems
(Sciendo, 2005)
This mini-review reports the recent advances in the hydrodynamic techniques for formation of bubbles of gas in liquid in ... |
Ponencia
Producción de micropartículas fluorescentes de poliestireno mediante la tecnología Flow-Focusing
(2005)
El presente trabajo describe la producción de micropartículas (MPs) fluorescentes de poliestireno empleando la tecnología ... |
Ponencia |
Patente. Invención
Dispositivo multidispositivo y procedimiento para la produccion de chorros capilares y particulas micro y nanometricos.
(Oficina Española de Patentes y Marcas , 2004)
Dispositivo, multidispositivo y procedimiento para la producción de chorros capilares y partículas micro y nanométricos.La ... |
Artículo
On the general scaling theory for electrospraying
(Cambridge University Press, 2004)
A systematic dimensional rationale is proposed here to analyse the electrohydro- dynamic equations governing liquid ... |
Artículo
A new device for the generation of microbubbles
(Elsevier, 2004)
In this paper we present a new method for the production of bubble-liquid suspensions (from now on BLS) composed of ... |
Patente. Invención
Matrices de conductos capilares de utilidad quimica y biologica
(Oficina Española de Patentes y Marcas , 2003)
Matrices de conductos capilares de utilidad química y biológica.El objeto de esta invención es un procedimiento para la ... |
Patente. Invención
Dispositivo y procedimiento para producir chorros líquidos compuestos multicomponentes estacionarios y cápsulas multicomponente y/o multicapa de tamaño micro y nanométrico
(Oficina Española de Patentes y Marcas (OEPM), 2003)
Dispositivo y procedimiento para producir chorros líquidos compuestos multicomponentes estacionarios y cápsulas multicomponente ... |
Patente. Invención
Método para producir un aerosol
(Oficina Española de Patentes y Marcas , 2002)
Un método, que comprende las etapas de:forzar un líquido desde una abertura de salida de un dispositivo de suministro;forzar ... |
Patente. Invención
Dispositivo de dispersión de un fluido en otro inmiscible en forma de microgotas o microburbujas de tamaño uniforme.
(Oficina Española de Patentes y Marcas , 2001)
Dispositivo de dispersión de un fluido en otro inmiscible en forma de microgotas o microburbujas de tamaño uniforme.El ... |
Tesis Doctoral |
Artículo
Perfectly Monodisperse Microbubbling by Capillary Flow Focusing
(The American Physical Society, 2001)
Here we report a simple microfluidics phenomenon which allows the efficient mass production of micron size gas bubbles ... |
Patente. Invención
Método de producción de gotitas huecas.
(Oficina Española de Patentes y Marcas , 2000)
Un método para producir gotitas huecas (81), comprendiendo el método las fases de: forzar un gas a través de un conducto ... |
Patente. Invención
Procedimiento de atomización de líquidos.
(Oficina Española de Patentes y Marcas , 2000)
Procedimiento de atomización de líquidos. El objeto de la presente invención es un procedimiento de atomización de líquidos ... |
Tesis Doctoral |
Artículo
Low and high Reynolds number flows inside Taylor cones
(American Physical Society, 1998)
Liquid motions inside Taylor cones exhibit interesting features which are not well understood yet. In addition to the flow ... |
Artículo
Generation of Steady Liquid Microthreads and Micron-Sized Monodisperse Sprays in Gas Streams
(The American Physical Society, 1998)
A new class of microscopic jet flows is here reported: for a certain range of physical parameters and geometrical ... |
Artículo
Cone-Jet Analytical Extension of Taylor’s Electrostatic Solution and the Asymptotic Universal Scaling Laws in Electrospraying
(The American Physical Society, 1997)
An analytical cone-jet solution for the electrohydrodynamic atomization of liquids has been foundfor an ... |
Artículo
The Dynamics of Bubbles in Periodic Vortex Flowss
(Kluwer Academic Publishers, 1993)
To analyze the dynamics of small, spherical, rigid bubbles in a certain class of turbulent shear flows dominated by large ... |
Artículo
The dynamics and mixing of small spherical particles in a plane, free shear layer
(American Institute of Physics, 1991)
The equation of motion of small rigid spheres settling under gravity in a two-dimensional inviscid flow given by the Stuart ... |
Artículo
Análisis modal de gotas cautivas
(Asociación española de ingeniería mecánica, 1987)
Se ha desarrollado un modelo analítico para determinar las frecuencias de vibración y las oscilaciones libres de pequeña amplitud de gotas cautivas bajo la influencia de campos gravitatorios y/o isorrotacionales. |