Buscar
Mostrando ítems 1-10 de 62
Artículo
Direct magnetocaloric measurements of Fe-B-Cr-X (X = La, Ce) amorphous ribbons
(American Institute of Physics, 2011)
A procedure has been developed to directly measure the adiabatic temperature change of amorphous melt-spun Fe-based ribbons displaying attractive room temperature magnetocaloric properties. Polycrystalline Gd ribbons are ...
Artículo
Additive manufacturing of magnetocaloric (La,Ce)(Fe,Mn,Si)13–H particles via polymer-based composite filaments
(Elsevier, 2022-11)
Additive manufacturing could be an excellent way of shaping magnetocaloric heat exchangers in magnetic refrigerators. However, the metal additive manufacturing techniques present the serious limitation that the melting of ...
Artículo
Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites
(Elsevier, 2014)
This paper is devoted to correlate the microstructure and room temperature mechanical properties of single-wall carbon nanotube (SWNT) reinforced 3. mol% yttria stabilized tetragonal zirconia with high SWNT content (2.5, ...
Artículo
Revealing the Impact of Different Iron-Based Precursors on the ‘Catalytic’ Graphitization for Synthesis of Anode Materials for Lithium Ion Batteries
(Wiley-Blackwell, 2023)
Low cost and environmentally friendly production of graphite anodes from naturally available biomass resources is of great importance to satisfy the increasing material demand for lithium ion batteries. Herein, graphitization ...
Artículo
Spinel Ferrite Catalysts for CO2 Reduction Via Reverse Water Gas Shift Reaction
(Elsevier, 2023)
The production of CO via Reverse Water Gas Shift (RWGS) reaction is a suitable route for CO2 valorization. In this study a series of modified spinels AB2O4 (A site = Ni, Zn and Cu and B site=Fe) are investigated as RWGS ...
Artículo
Extension of the Classical Theory of Crystallization to Non-isothermal Regimes: Application to Nanocrystallization Processes
(Elsevier, 2012)
The non-isothermal kinetics of primary crystallization processes is studied from numerically generated curves and their predictions have been tested in several nanocrystallization processes. Single processes and transformations ...
Artículo
Fabrication, microstructure and high-temperature plastic deformation of three-phase Al2O3/Er3Al5O12/ZrO2 sintered ceramics
(Elsevier, 2021)
The fabrication, microstructure and high-temperature creep behavior of chemically compatible, three-phase alumina/erbium aluminum garnet (Er3Al5O12, EAG)/erbia fully-stabilized cubic ZrO2 (ESZ) particulate composites with ...
Artículo
Dynamic recrystallization during creep of proton-conducting barium cerate perovskites
(Wiley-Blackwell, 2022-11)
Uniaxial compression tests were conducted on perovskite-structured barium cerate polycrystals doped with 5-at.% yttrium and 5-at.% ytterbium and submicrometric grain sizes, at temperatures between 1423 and 1573 K (0.70–0.78Tm) ...
Artículo
Rietveld analysis and mechanical properties of in situ formed La-β-Al2O3/Al2O3 composites prepared by sol-gel method
(Elsevier, 2022)
In this work, the crystal evolution of α-Al2O3 composites reinforced with LBA platelets were monitored by XRD Rietveld. In addition, the mechanical properties of totally densified specimens were researched by Vickers ...
Artículo
Structural, Vibrational, and Magnetic Characterization of Orthoferrite LaFeO3 Ceramic Prepared by Reaction Flash Sintering
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)
LaFeO3 perovskite ceramics have been prepared via reaction flash technique using Fe2O3 and La2O3 as precursors. The obtained pellets have been investigated using several techniques. The formation of LaFeO3 has been clearly ...