Final Degree Project
Simulador en Python para el cálculo de la intensidad de campo de la onda ionosférica según la Rec. ITU-R P.1147
Author/s | Peláez Pérez, Juan Manuel |
Director | Hornillo Mellado, Susana |
Department | Universidad de Sevilla. Departamento de Teoría de la Señal y Comunicaciones |
Publication Date | 2019 |
Deposit Date | 2020-03-17 |
Academic Title | Universidad de Sevilla. Grado en Ingeniería de las Tecnologías de Telecomunicación |
Abstract | Empleando la recomendación ITU-R P.1147 se realiza un simulador en Python capaz de determinar la intensidad de campo para el rango de frecuencias comprendido de 150 a 1700 kHz. El cálculo de dicha intensidad dependerá de ... Empleando la recomendación ITU-R P.1147 se realiza un simulador en Python capaz de determinar la intensidad de campo para el rango de frecuencias comprendido de 150 a 1700 kHz. El cálculo de dicha intensidad dependerá de diversos factores como la ubicación de las estaciones, la frecuencia de transmisión o la hora a la que se realice la comunicación. En primer lugar se realizará un breve repaso histórico sobre cuales fueron los motivos que llevaron a investigar sobre este aspecto sobre este tema. Posteriormente, se explicarán algunos conceptos importantes que se utilizarán en la recomendación y se detallará en profundidad la norma. Acto seguido, se presentará un código en Python capaz de calcular la intensidad de campo, que introduciendo una serie de parámetros básicos a elección de quien haga el diseño devolverá el valor calculado teniendo en cuenta todas las posibles situaciones o posibilidades que puede abarcar dicha recomendación. Por último, para verificar el funcionamiento del programa se ha realizado una serie de ejemplos analíticos con los que se pretende comparar los resultados que éste nos ofrece y contrastar de este modo el correcto desarrollo del programa. Using the ITU-R P.1147 Recommendation, a Python simulator is used to determine the field strength for the range of frequencies from 150 to 1700 kHz. The calculation of this intensity will depend on several factors such as ... Using the ITU-R P.1147 Recommendation, a Python simulator is used to determine the field strength for the range of frequencies from 150 to 1700 kHz. The calculation of this intensity will depend on several factors such as the location of the stations, the frequency of transmission or the time at which communication takes place. First, it will commence with a historical review on what were the reasons to research about this subject. Subsequently, some important concepts that will be used in the recommendation will be explained and the norm will be explained in detail too. After, a code in Python be able to calculate the field strength will be presented and introducing a series of basic parameters will return the calculated of the intensity. Finally, to verify the operation of the program, the same examples are calculate analytically to show the correct execution of the program. |
Citation | Peláez Pérez, J.M. (2019). Simulador en Python para el cálculo de la intensidad de campo de la onda ionosférica según la Rec. ITU-R P.1147. (Trabajo Fin de Grado Inédito). Universidad de Sevilla, Sevilla. |
Files | Size | Format | View | Description |
---|---|---|---|---|
TFG-2574-PELAEZ PEREZ.pdf | 3.227Mb | [PDF] | View/ | |