Article
Influencia de la adición de estaño en el proceso de precipitación en una aleación de Cu-Ni-Zn
Author/s | Donoso, Eduardo
Diánez Millán, María Jesús Criado Luque, José Manuel Espinoza, Rodrigo Mosquera, Edgar |
Publication Date | 2016 |
Deposit Date | 2018-04-02 |
Published in |
|
Abstract | Mediante calorimetría diferencial de barrido (DSC), medidas de microdureza y microscopía electrónica de transmisión de alta resolución (HRTEM) se estudió la influencia de la adición de 1,1% en peso de estaño en el ... Mediante calorimetría diferencial de barrido (DSC), medidas de microdureza y microscopía electrónica de transmisión de alta resolución (HRTEM) se estudió la influencia de la adición de 1,1% en peso de estaño en el endurecimiento por precipitación en una aleación de Cu-11Ni-20Zn (% en peso). Las curvas calorimétricas de la aleación ternaria, en el intervalo de temperaturas analizado, muestran la presencia de dos reacciones exotérmicas asociadas al desarrollo de orden de corto alcance, favorecidas por la migración de vacantes. En cambio, en la aleación cuaternaria se observa una reacción exotérmica y una endotérmica, asociadas a la formación y disolución de precipitados de Cu2NiZn, respectivamente. Se ha demostrado que una adición de 1,1% de estaño juega un papel importante en la formación de los precipitados de Cu2NiZn, responsables del endurecimiento por precipitación de la aleación ternaria. Influence of tin additions on the precipitation processes in a Cu-Ni-Zn alloys. The influence of 1.1 wt% tin additions on the precipitation hardening of Cu-11 wt% Ni-20 wt% Zn alloy was studied by Differential Scanning ... Influence of tin additions on the precipitation processes in a Cu-Ni-Zn alloys. The influence of 1.1 wt% tin additions on the precipitation hardening of Cu-11 wt% Ni-20 wt% Zn alloy was studied by Differential Scanning Calorimetry (DSC), microhardeness measurements and High Resolution Transmission Electron Microscopy (HRTEM). The calorimetric curves, in the range of temperatures analyzed, show the presence of two exothermic reactions in the ternary alloy, associated to the short-range-order development assisted by migration of excess vacancies. On the other hand, one exothermic and one endothermic reaction are observed in the quaternary alloy, associated to the formation and dissolution of Cu2NiZn precipitates, respectively. It has been show that an addition of 1.1% tin plays an important role in the formation of Cu2NiZn precipitates, responsible for the precipitation hardening of the ternary alloy |
Funding agencies | Fondo Nacional de Desarrollo Científico y Tecnológico (FONDECYT). Chile |
Project ID. | 1140782 |
Citation | Donoso, E., Diánez Millán, M.J., Criado Luque, J.M., Espinoza, R. y Mosquera, E. (2016). Influencia de la adición de estaño en el proceso de precipitación en una aleación de Cu-Ni-Zn. Revista de Metalurgia, 52, 1-8. |
Files | Size | Format | View | Description |
---|---|---|---|---|
influencia de la adicion.pdf | 992.8Kb | [PDF] | View/ | |