Artículo
Assessment of Osstell ISQ’s reliability for implant stability measurement: A cross-sectional clinical study
Autor/es | Herrero-Climent, Mariano
Santos García, Rocío Jaramillo Santos, María Reyes Romero Ruiz, Manuel María Fernández Palacín, Ana Lázaro-Calvo, Pedro Bullon, Pedro Ríos-Santos, J.V. Bullon, Pedro |
Departamento | Universidad de Sevilla. Departamento de Estomatología Universidad de Sevilla. Departamento de Medicina Preventiva y Salud Pública |
Fecha de publicación | 2013 |
Fecha de depósito | 2024-08-05 |
Publicado en |
|
Resumen | Resonance frequency analysis (RFA) allows assess implant stability by measuring implant oscillation frequency
on the bone. RFA is an objective and non-invasive method for implant stability measurement, although scarce ... Resonance frequency analysis (RFA) allows assess implant stability by measuring implant oscillation frequency on the bone. RFA is an objective and non-invasive method for implant stability measurement, although scarce evidence has been provided so far on its reliability. Objectives: Assess the Osstell ISQ system’s reliability (i.e., its measurement reproducibility and repeatability) by means of the intraclass correlation coefficient (ICC) as statistical method. Study Desing: Implants stability registers were completed by means of Osstell ISQ on 85 implants on 23 patients. Six measurements were completed on each implant by means of two different SmartPegs (types I and II); that is, three consecutive measurements with each transducer. Results: Average ISQ was 72.40, 72.22 and 72.79, and 72.06, 72.59 and 72.82 in the first, second, and third meas urements with SmartPegs I and II, respectively. Equal values or differences below three ISQ points were observed in 52.9% and 62.4% of the cases with SmartPegs I and II, respectively. The intraclass correlation coefficient was 0.97 for both SmartPegs, and repeatability and reproducibility also reached 0.97 for both SmartPegs. Conclusions: The RFA system Osstell ISQ presents almost perfect repeatability and reproducibility after intra class correlation coefficient analysis. Osstell ISQ measurements are highly reliable regarding reproducibility. Therefore, one measurement proves enough. |
Cita | Herrero-Climent, M., Santos García, R., Jaramillo Santos, M.R., Romero Ruiz, M.M., Fernández Palacín, A., Lázaro-Calvo, P.,...,Bullon, P. (2013). Assessment of Osstell ISQ’s reliability for implant stability measurement: A cross-sectional clinical study. Medicina oral, patología oral y cirugía bucal, 18 (6), 877-882. https://doi.org/10.4317/medoral.19120. |
Ficheros | Tamaño | Formato | Ver | Descripción |
---|---|---|---|---|
Assessment of Osstell ISQ’s.pdf | 325.2Kb | [PDF] | Ver/ | |
Este registro aparece en las siguientes colecciones
Este documento está protegido por los derechos de propiedad intelectual e industrial. Sin perjuicio de las exenciones legales existentes, queda prohibida su reproducción, distribución, comunicación pública o transformación sin la autorización del titular de los derechos, a menos que se indique lo contrario.