Final Degree Project
Diseño de una instalación de energía solar térmica en una residencia de estudiantes
Author/s | Llorente Díaz, Jesús |
Director | Guerra Macho, José Julio |
Department | Universidad de Sevilla. Departamento de Ingeniería Energética |
Publication Date | 2024 |
Deposit Date | 2024-08-01 |
Academic Title | Universidad de Sevilla. Grado en Ingeniería de Tecnologías Industriales |
Abstract | El trabajo se enfoca en el estudio y diseño de una instalación solar térmica de baja temperatura para la
producción de agua caliente sanitaría (ACS) en una residencia de estudiantes situada en la universidad Pablo
de ... El trabajo se enfoca en el estudio y diseño de una instalación solar térmica de baja temperatura para la producción de agua caliente sanitaría (ACS) en una residencia de estudiantes situada en la universidad Pablo de Olavides en Dos Hermanas, Sevilla. Para su realización ha sido necesario realizar diferentes estudios: el funcionamiento básico de una instalación de este tipo; la situación del edificio y características climatológicas y de radiación de la zona; y un dimensionamiento de cada uno de los diferentes componentes. Se ha hecho uso, para el calculo y dimensionado de la instalación, del programa informático CHEQ4, que permite el diseño asegurando el cumplimiento de la contribución solar mínima exigible según el Código Técnico de la Edificación (CTE) y el Reglamento de Instalaciones Térmicas en Edificios (RITE). The following work focuses on the study and design of a low-temperature solar thermal installation for the production of domestic hot water (DHW) in a student residence located at Pablo de Olavides University in Dos ... The following work focuses on the study and design of a low-temperature solar thermal installation for the production of domestic hot water (DHW) in a student residence located at Pablo de Olavides University in Dos Hermanas, Seville. To carry out this project, it has been necessary to conduct various studies: the basic operation of such an installation, the location of the building and the climatological and radiation characteristics of the area, and the sizing of each of the different components. The calculation and sizing of the installation have been performed using the CHEQ4 software, which allows for designing while ensuring compliance with the minimum solar contribution required by the Technical Building Code (CTE) and the Regulation of Thermal Installations in Buildings (RITE). |
Citation | Llorente Díaz, J. (2024). Diseño de una instalación de energía solar térmica en una residencia de estudiantes. (Trabajo Fin de Grado Inédito). Universidad de Sevilla, Sevilla. |
Files | Size | Format | View | Description |
---|---|---|---|---|
Llorente Díaz, Jesús_G5180.pdf | 7.405Mb | [PDF] | View/ | |