Mostrar el registro sencillo del ítem

Ponencia

dc.creatorMuñoz, Sergioes
dc.creatorNavarro Pintado, Carloses
dc.creatorDomínguez Abascal, Jaimees
dc.date.accessioned2022-06-30T15:45:31Z
dc.date.available2022-06-30T15:45:31Z
dc.date.issued2004
dc.identifier.citationMuñoz, S., Navarro Pintado, C. y Domínguez Abascal, J. (2004). Influencia del coeficiente de rozamiento en fretting. En Congreso Español de la Fractura Punta Umbría (Huelva): Grupo español de fractura.
dc.identifier.urihttps://hdl.handle.net/11441/134875
dc.description.abstractEn este artículo se analiza el efecto que una modificación del coeficiente de rozamiento tiene sobre la vida a fatiga en un ensayo de fretting. Para ello se ha realizado una serie de ensayos de fretting con contacto esfera-plano. El material empleado ha sido la aleación de aluminio 7075-T651. En estos ensayos se ha medido el coeficiente de rozamiento usando dos métodos distintos. Los ensayos se han realizado a distintas frecuencias y se ha estudiado cómo afecta dicho parámetro al coeficiente de rozamiento. A raíz de los resultados obtenidos, se ha analizado la influencia del coeficiente de rozamiento en las tensiones en la zona de contacto en varias situaciones distintas: (i) variando el tamaño de la zona de contacto (ii) variando la relación entre las cargas tangencial y normal. Este estudio se realiza tanto para condiciones de deslizamiento parcial como global. Por último, mediante un modelo analítico, se estudia la influencia de dichas variaciones del coeficiente de rozamiento en la vida a fatiga estimadaes
dc.description.abstractThis paper analyses the effect that a variation in the value of the friction coefficient has on the fatigue lifetime in a fretting test. In this way, systematic and controlled experiments have been carried out with a spherical-tip contact pad against a flat surface. The pad and specimen materials were both 7075-T651 aluminium alloy. The value of the friction coefficient has been measured using two different methods. The experiments have been carried out at different frecuencies, studing the influence of this parameter on the value of the friction coeficient. From the results obtained, the influence of the friction coefficient on the stress near the contact zone has been analysed in different situations: (i) varying the size of the contact zone (ii) varying the relationship between tangential and normal forces. This study has been carried out in both partial and total slip conditions. Finally, using an analytic model, the influence of the friction coefficient on the fatigue lifetime predictions has been investigated.es
dc.formatapplication/pdfes
dc.format.extent7 p.es
dc.language.isoenges
dc.publisherGrupo español de fracturaes
dc.relation.ispartofCongreso Español de la Fractura (2004).
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectCoeficiente de rozamientoes
dc.subjectFrettinges
dc.subjectFatigaes
dc.titleInfluencia del coeficiente de rozamiento en frettinges
dc.typeinfo:eu-repo/semantics/conferenceObjectes
dcterms.identifierhttps://ror.org/03yxnpp24
dc.type.versioninfo:eu-repo/semantics/publishedVersiones
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses
dc.contributor.affiliationUniversidad de Sevilla. Departamento de Ingeniería Mecánica y de Fabricaciónes
dc.relation.publisherversionhttps://gef.es/publicacioneses
dc.eventtitleCongreso Español de la Fracturaes
dc.eventinstitutionPunta Umbría (Huelva)es
dc.identifier.sisius5563690es

FicherosTamañoFormatoVerDescripción
Influencia_del_coeficiente_de_ ...98.93KbIcon   [PDF] Ver/Abrir  

Este registro aparece en las siguientes colecciones

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Excepto si se señala otra cosa, la licencia del ítem se describe como: Attribution-NonCommercial-NoDerivatives 4.0 Internacional