- idUS
- Investigación
- Ingeniería y Arquitectura
- Ingeniería y Ciencia de los Materiales y del Transporte
- Artículos (Ingeniería y Ciencia de los Materiales y del Transporte)
- Listar Artículos (Ingeniería y Ciencia de los Materiales y del Transporte) por autor
Listar Artículos (Ingeniería y Ciencia de los Materiales y del Transporte) por autor "Muñoz Moreno, Sergio"
Mostrando ítems 1-12 de 12
-
Artículo
A Track Geometry Measuring System Based on Multibody Kinematics, Inertial Sensors and Computer Vision
Escalona Franco, José Luis; Urda Gómez, Pedro; Muñoz Moreno, Sergio (MDPI, 2020-01)This paper describes the kinematics used for the calculation of track geometric irregularities of a new Track Geometry ...
-
Artículo
An alternative procedure to measure railroad track irregularities. Application to a scaled track
Fernández Aceituno, Javier; Chamorro Moreno, Rosario; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2019-04)In this paper an alternative procedure to accurately measure static railroad track irregularities is proposed and applied ...
-
Artículo
Application and Experimental Validation of a Multibody Model with Weakly Coupled Lateral and Vertical Dynamics to a Scaled Railway Vehicle
Urda Gómez, Pedro; Muñoz Moreno, Sergio; Aceituno, Francisco J.; Escalona Franco, José Luis (MDPI, 2020)In this paper, a multibody dynamic model of a railway vehicle that assumes that vertical and lateral dynamics are weakly ...
-
Artículo
Artificial neural networks applied to the measurement of lateral wheel-rail contact force: A comparison with a harmonic cancellation method
Urda Gómez, Pedro; Fernández Aceituno, Javier; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2020-11)This paper presents a method for the experimental measurement of the lateral wheel-rail contact force based on Artificial ...
-
Artículo
Estimation of lateral track irregularity using a Kalman filter. Experimental validation
Muñoz Moreno, Sergio; Ros, Javier; Urda Gómez, Pedro; Escalona Franco, José Luis (Elsevier, 2021-07)The aim of this work is the development of a model-based methodology for the estimation of lateral track irregularities ...
-
Artículo
Estimation of the trajectory and attitude of railway vehicles using inertial sensors with application to track geometry measurement
González-Carbajal, Javier; Urda Gómez, Pedro; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Taylor and Francis, 2023-04)This paper describes a novel method for the estimation of the trajectory and orientation of a rigid body moving along a ...
-
Artículo
Influence of the Compaction Pressure and Sintering Temperature on the Mechanical Properties of Porous Titanium for Biomedical Applications
Castillo, Sandra M.; Muñoz Moreno, Sergio; Trueba Muñoz, Paloma; Díaz, Eduardo; Torres Hernández, Yadir (MDPI, 2019)In the present work, the use of porous titanium is proposed as a solution to the difference in stiffness between the implant ...
-
Artículo
Measurement of railroad track irregularities using an automated recording vehicle
Urda Gómez, Pedro; Fernández Aceituno, Javier; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2021-10)This paper presents the design, construction and experimental validation of a scaled railway vehicle for the automated and ...
-
Artículo
Multibody model of railway vehicles with weakly coupled vertical and lateral dynamics
Muñoz Moreno, Sergio; Fernández Aceituno, Javier; Urda Gómez, Pedro; Escalona Franco, José Luis (Elsevier, 2019-01)In the field of railroad dynamics, multibody models used for on-board state observation, parameter identification and track ...
-
Artículo
Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique
Lascano, Sheila; Arévalo Mora, Cristina María; Montealegre-Meléndez, Isabel; Muñoz Moreno, Sergio; Rodríguez-Ortiz, José Antonio; Trueba Muñoz, Paloma; Torres Hernández, Yadir (MDPI, 2019)Titanium and its alloys are reference materials in biomedical applications because of their desirable properties. However, ...
-
Artículo
Real-Time Measurement of Track Irregularities Using an Instrumented Axle and Kalman Filtering Techniques
Muñoz Moreno, Sergio; Urda Gómez, Pedro; Yu, Xinxin; Mikkola, Aki; Escalona Franco, José Luis (American Society of Mechanical Engineers (ASME), 2023-11)A model-based methodology for the estimation of both lateral and vertical track irregularities is presented. This methodology, ...
-
Artículo
Wheel-rail contact force measurement using strain gauges and distance lasers on a scaled railway vehicle
Urda Gómez, Pedro; Muñoz Moreno, Sergio; Fernández Aceituno, Javier; Escalona Franco, José Luis (Elsevier, 2020-04)In this paper, a 1 : 10 scaled dynamometric wheelset is presented. It has been equipped with two different technologies: ...