NombreMuñoz Moreno, Sergio
DepartamentoIngeniería y Ciencia de los Materiales y del Transporte
Área de conocimientoCiencia de los Materiales e Ingeniería Metalúrgica
Categoría profesionalProfesor Titular de Universidad
Correo electrónicoSolicitar
           
  • Nº publicaciones

    24

  • Nº visitas

    2083

  • Nº descargas

    4243


 

Dataset
Icon

Campaña experimental de vehículo ferroviario "Bogie-2018" en vía a escala de grupo RAILDYNUS [Dataset]

Muñoz Moreno, Sergio; Urda Gómez, Pedro; Escalona Franco, José Luis (2024)
Los datos presentados se corresponden con distintas campañas experimentales llevadas a cabo por el grupo de investigación ...
Dataset
Icon

Campaña experimental de vehículo ferroviario "Bogie-2021" en vía a escala de grupo RAILDYNUS [Dataset]

Muñoz Moreno, Sergio; Urda Gómez, Pedro; Escalona Franco, José Luis (2024)
Los datos presentados se corresponden con distintas campañas experimentales llevadas a cabo por el grupo de investigación ...
Dataset
Icon

Medida de la geometría de vía a escala del grupo RAILDYNUS [Dataset]

Muñoz Moreno, Sergio; Urda Gómez, Pedro; Escalona Franco, José Luis (2024)
Se presenta los resultados obtenidos tras la medida geométrica de la vía a escala. Tras un procedimiento experimental que ...
Dataset
Icon

Campaña experimental de vehículo AUSCULTADOR en vía a escala de grupo RAILDYNUS [Dataset]

Muñoz Moreno, Sergio; Urda Gómez, Pedro; Escalona Franco, José Luis (2024)
Los datos presentados se corresponden con distintas campañas experimentales llevadas a cabo por el grupo de investigación ...
Artículo
Icon

Real-Time Measurement of Track Irregularities Using an Instrumented Axle and Kalman Filtering Techniques

Muñoz Moreno, Sergio; Urda Gómez, Pedro; Yu, Xinxin; Mikkola, Aki; Escalona Franco, José Luis (American Society of Mechanical Engineers (ASME), 2023)
A model-based methodology for the estimation of both lateral and vertical track irregularities is presented. This methodology, ...
Artículo
Icon

Estimation of the trajectory and attitude of railway vehicles using inertial sensors with application to track geometry measurement

González-Carbajal, Javier; Urda Gómez, Pedro; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Taylor and Francis, 2023)
This paper describes a novel method for the estimation of the trajectory and orientation of a rigid body moving along a ...
Trabajo Fin de Grado
Icon

Desarrollo de un reactor de lecho estático para la producción de hidrógeno verde

Santos González, Miguel de los; Sepúlveda Ferrer, Ranier Enrique; Muñoz Moreno, Sergio (2023)
El objetivo de este trabajo experimental es planificar y preparar el equipo para realizar ensayos con las piezas de óxido ...
Patente. Invención
Icon

Sistema y método de medida de geometría de vías

Escalona Franco, José Luis; Muñoz Moreno, Sergio; Chamorro Moreno, Rosario; Urda Gómez, Pedro (Oficina Española de Patentes y Marcas (OEPM), 2022)
Sistema y método de medida de geometría de vías (SMGV), para identificar y cuantificar irregularidades en una vía (1), ...
Artículo
Icon

Experimental measurement of track irregularities using a scaled track recording vehicle and Kalman filtering techniques

Muñoz Moreno, Sergio; Urda Gómez, Pedro; Escalona Franco, José Luis (Academic Press, 2022)
The actual trend of railway industry on track surveying is heading up the development of fast automated methods for ...
Artículo
Icon

Measurement of railroad track irregularities using an automated recording vehicle

Urda Gómez, Pedro; Fernández Aceituno, Javier; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2021)
This paper presents the design, construction and experimental validation of a scaled railway vehicle for the automated and ...
Artículo
Icon

Estimation of lateral track irregularity using a Kalman filter. Experimental validation

Muñoz Moreno, Sergio; Ros, Javier; Urda Gómez, Pedro; Escalona Franco, José Luis (Elsevier, 2021)
The aim of this work is the development of a model-based methodology for the estimation of lateral track irregularities ...
Artículo
Icon

Estimation of Lateral Track Irregularity through Kalman Filtering Techniques

Muñoz Moreno, Sergio; Ros, J.; Urda Gómez, Pedro; Escalona Franco, José Luis (2021)
The aim of this work is to develop a model-based methodology for monitoring lateral track irregularities based on the use ...
Artículo
Icon

Artificial neural networks applied to the measurement of lateral wheel-rail contact force: A comparison with a harmonic cancellation method

Urda Gómez, Pedro; Fernández Aceituno, Javier; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2020)
This paper presents a method for the experimental measurement of the lateral wheel-rail contact force based on Artificial ...
Artículo
Icon

Wheel-rail contact force measurement using strain gauges and distance lasers on a scaled railway vehicle

Urda Gómez, Pedro; Muñoz Moreno, Sergio; Fernández Aceituno, Javier; Escalona Franco, José Luis (Elsevier, 2020)
In this paper, a 1 : 10 scaled dynamometric wheelset is presented. It has been equipped with two different technologies: ...
Artículo
Icon

A Track Geometry Measuring System Based on Multibody Kinematics, Inertial Sensors and Computer Vision

Escalona Franco, José Luis; Urda Gómez, Pedro; Muñoz Moreno, Sergio (MDPI, 2020)
This paper describes the kinematics used for the calculation of track geometric irregularities of a new Track Geometry ...
Artículo
Icon

Application and Experimental Validation of a Multibody Model with Weakly Coupled Lateral and Vertical Dynamics to a Scaled Railway Vehicle

Urda Gómez, Pedro; Muñoz Moreno, Sergio; Aceituno, Francisco J.; Escalona Franco, José Luis (MDPI, 2020)
In this paper, a multibody dynamic model of a railway vehicle that assumes that vertical and lateral dynamics are weakly ...
Tesis Doctoral
Icon

Wheel-rail contact force measurement. A comparison between distance laser and strain gauges measuring technology

Urda Gómez, Pedro; Escalona Franco, José Luis; Muñoz Moreno, Sergio (2019)
The development of this PhD thesis is focus on the wheel/rail contact force measurement on a 1 : 10 scaled railway vehicle. ...
Artículo
Icon

An alternative procedure to measure railroad track irregularities. Application to a scaled track

Fernández Aceituno, Javier; Chamorro Moreno, Rosario; Muñoz Moreno, Sergio; Escalona Franco, José Luis (Elsevier, 2019)
In this paper an alternative procedure to accurately measure static railroad track irregularities is proposed and applied ...
Artículo
Icon

Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique

Lascano, Sheila; Arévalo Mora, Cristina María; Montealegre-Meléndez, Isabel; Muñoz Moreno, Sergio; Rodríguez-Ortiz, José Antonio; Trueba Muñoz, Paloma; Torres Hernández, Yadir (MDPI, 2019)
Titanium and its alloys are reference materials in biomedical applications because of their desirable properties. However, ...
Artículo
Icon

Influence of the Compaction Pressure and Sintering Temperature on the Mechanical Properties of Porous Titanium for Biomedical Applications

Castillo, Sandra M.; Muñoz Moreno, Sergio; Trueba Muñoz, Paloma; Díaz, Eduardo; Torres Hernández, Yadir (MDPI, 2019)
In the present work, the use of porous titanium is proposed as a solution to the difference in stiffness between the implant ...
Artículo
Icon

Multibody model of railway vehicles with weakly coupled vertical and lateral dynamics

Muñoz Moreno, Sergio; Fernández Aceituno, Javier; Urda Gómez, Pedro; Escalona Franco, José Luis (Elsevier, 2019)
In the field of railroad dynamics, multibody models used for on-board state observation, parameter identification and track ...
Trabajo Fin de Máster
Icon

Observación de estados de un vehículo a control remoto mediante modelo de sistema multicuerpo, medidas inerciales y visión artificial

Urda Gómez, Pedro; Muñoz Moreno, Sergio (2018)
En este Trabajo Fin de Máster se ha llevado a cabo la construcción de un modelo de sistema multicuerpo de un vehículo ...
Trabajo Fin de Grado
Icon

Diferentes modelos para la simulación del comportamiento mecánico del Titanio poroso

Castillo Rivero, Sandra María; Muñoz Moreno, Sergio (2015)
Tesis Doctoral
Icon

Estimación de vida a fatiga por fretting aplicación a componentes recubiertos

Muñoz Moreno, Sergio; Domínguez Abascal, Jaime (2007)