Listar Artículos (Ingeniería y Ciencia de los Materiales y del Transporte) por título
Mostrando ítems 67-86 de 313
-
Artículo
Deposición sol-gel de hidroxiapatita bioactiva sobre titanio poroso
(ECIMED, 2017)Introducción: el titanio y algunas de sus aleaciones son considerados la mejor opción para fabricar implantes permanentes, ...
-
Artículo
Deposition of bioactive gelatin coatings on porous titanium: Influence of processing parameters, size and pore morphology
(Elsevier, 2021-09)In this work porous commercially pure Ti substrates fabricated by spacer-holder technique (50 vol% NH4HCO3 and three ...
-
Artículo
Design and manufacturing by fused filament technique of novel YSZ porous grafts infiltrated with PCL/PVA/AgNPs for large bone defects repairing
(Elsevier, 2024-02-19)Addressing large bone segmental defects remains a profound challenge in orthopaedic surgery, demanding graft designs that ...
-
Artículo
Design, processing and characterization of titanium with radial graded porosity for bone implants porosity for bone implants
(Elsevier, 2016-07)Titanium cylinders with radial graded porosity, which are potentially suitable for biomedical applications (replacement ...
-
Artículo
Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration
(Elsevier, 2019)Titanium implant failures are mainly related to stress shielding phenomenon and the poor cell interaction with host bone ...
-
Artículo
Designing, processing and characterisation of titanium cylinders with graded porosity: An alternative to stress-shielding solutions
(Elsevier, 2014)Bone resorption events and consequent failure of titanium implants are frequently related to stress-shielding problems, ...
-
Artículo
Developing a bioactive glass coated dental floss: antibacterial and mechanical evaluations
(Springer, 2023-10)In the present study, we investigated commercial dental floss coated with chitosan or chitosan + mesoporous bioactive ...
-
Artículo
Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders
(Elsevier, 2020)In this work, a sequential compaction device has been successfully developed and implemented to produce commercially pure ...
-
Artículo
Development by Mechanochemistry of La0.8Sr0.2Ga0.8Mg0.2O2.8 Electrolyte for SOFCs
(MDPI, 2020)In this work, a mechanochemical process using high-energy milling conditions was employed to synthesize La0.8Sr0.2Ga0.8Mg0.2O3-δ ...
-
Artículo
Development of a TiNbTaMoZr-Based High Entropy Alloy with Low Young´s Modulus by Mechanical Alloying Route
(MDPI, 2020-11)In this work, an equiatomic TiNbTaMoZr-based high-entropy alloy (HEA) has been developed by a powder metallurgy route, ...
-
Artículo
Development of electric resistance sintering process for the fabrication of hard metals: Processing, microstructure and mechanical properties
(Elsevier, 2017)This work presents the development of the Electrical Resistance Sintering (ERS) process for the fabrication of hard metals. ...
-
Artículo
Development of highly efficient cost-effective CdS/Ag nanocomposite for removal of azo dyes under UV and solar light
(Elsevier, 2023-03)Water pollution by toxic dyes is an environmental problem that threatens human health. A green technology to solve this ...
-
Artículo
Development of multicomponent-multiphase materials based on (Ti, Ta, Nb)CxN1-x carbonitride solid solutions
(Elsevier, 2012)A set of powdered cermets based on (Ti,Ta,Nb)C xN 1-x carbonitride solid solutions were synthesized from mixtures of ...
-
Artículo
Development of porous silver nanoparticle/polycaprolactone/polyvinyl alcohol coatings for prophylaxis in titanium interconnected samples for dental implants
(Elsevier, 2022-05)Stress shielding phenomenon, poor osseointegration, or bacterial infections of titanium dental implants are widely recognized ...
-
Artículo
Development of Surface-Coated Polylactic Acid/Polyhydroxyalkanoate (PLA/PHA) Nanocomposites
(Multidisciplinary Digital Publishing Institute (MDPI), 2019-03-01)This work reports on the design and development of nanocomposites based on a polymeric matrix containing biodegradable ...
-
Artículo
Directed Irradiation Synthesis as an Advanced Plasma Technology for Surface Modification to Activate Porous and “as-received” Titanium Surfaces
(MDPI, 2019)For the design of smart titanium implants, it is essential to balance the surface properties without any detrimental effect ...
-
Artículo
Diseño, procesado y caracterización, procesado y caracterización de materiales con porosidad radial controlada para aplicaciones nucleares
(Grupo Español de Fractura, 2015)Las pastillas de combustible irradiado presentan un gradiente de porosidad radial como consecuencia de la presencia de gas ...
-
Artículo
Dos décadas de formación superior en prevención como Enseñanzas Propias de la Universidad de Sevilla en la Escuela Politécnica Superior
(Universidad de Sevilla. Centro de Formación Permanente, 2012) -
Artículo
Editorial: Tailored Porous Biomaterials for Hard and Soft Tissues: Focus on Surface Functionalization
(Frontiers Media, 2021-09) -
Artículo
Efectos de la compactación y estabilización con cemento y cal en las propiedades mecánicas de filitas
(Sociedad Española de Mineralogía, 2006)De forma general se considera a las «tilitas» como rocas foliadas, cuyos componentes esenciales son filosilicatos de grano ...