Buscar
Mostrando ítems 21-30 de 193
Artículo
Bacterial behavior on coated porous titanium substrates for biomedical applications
(Elsevier, 2019)
In this work, bacterial behavior on dense and porous titanium substrates is discussed. Porous titanium was fabricated by a space holder technique (using 50 vol%, NH4HCO3 with particle sizes between 250 and 355 μm). These ...
Artículo
Study of the Influence of TiB Content and Temperature in the Properties of In Situ Titanium Matrix Composites
(MDPI, 2017-10-27)
This work focuses on the study of the microstructure, hardening, and stiffening effect caused by the secondary phases formed in titanium matrices. These secondary phases originated from reactions between the matrix and ...
Artículo
Directed Irradiation Synthesis as an Advanced Plasma Technology for Surface Modification to Activate Porous and “as-received” Titanium Surfaces
(MDPI, 2019)
For the design of smart titanium implants, it is essential to balance the surface properties without any detrimental effect on the bulk properties of the material. Therefore, in this study, an irradiation-driven surface ...
Ponencia
Artículo
Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys
(MDPI, 2017)
In this work, a study of the influence of the starting materials and the processing time used to developW/Cu alloys is carried out. Regarding powder metallurgy as a promising fabrication route, the difficulties in ...
Libro
IV Jornada de Investigación y Postgrado: Libro de Actas
(3ciencias, 2018-04)
Ponencia
Herramientas para la docencia en prevención: génesis y evolución de una bibliografía de referencia
(2012-05)
La formación académica del autor unido a la actividad profesional desempeñada durante mas de cuarenta años, relacionada con la docencia y la prevención como profesor de la Universidad de Sevilla y como técnico de prevención ...
Artículo
Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
(Elsevier, 2018)
The stress shielding and the poor osseointegration in titanium implants are still problems to be resolved. In this context, this work proposes a balanced solution. Titanium samples were fabricated, with a porosity of ...
Artículo
Porous Titanium Cylinders Obtained by the Freeze-Casting Technique: Influence of Process Parameters on Porosity and Mechanical Behavior
(MDPI, 2020)
The discrepancy between the stiffness of commercially pure titanium and cortical bone tissue compromises its success as a biomaterial. The use of porous titanium has been widely studied, however, it is still challengi ...
Artículo
Study of the Effect of the Floating Die Compaction on Mechanical Properties of Titanium Foams
(MDPI, 2020-12)
Titanium (Ti) and its alloys are used for biomedical applications because of their high resistance to corrosion, good strength-to-weight ratio, and high fatigue resistance. However, a problem that compromises the performance ...