Buscar
Mostrando ítems 1-10 de 28
Artículo
Design, processing and characterization of titanium with radial graded porosity for bone implants porosity for bone implants
(Elsevier, 2016-07)
Titanium cylinders with radial graded porosity, which are potentially suitable for biomedical applications (replacement of cortical and trabecular bones involved in different joint and dental restorations), have been ...
Artículo
Bacterial behavior on coated porous titanium substrates for biomedical applications
(Elsevier, 2019)
In this work, bacterial behavior on dense and porous titanium substrates is discussed. Porous titanium was fabricated by a space holder technique (using 50 vol%, NH4HCO3 with particle sizes between 250 and 355 μm). These ...
Artículo
Medium-Frequency Electrical Resistance Sintering of Soft Magnetic Powder Metallurgy Iron Parts
(MDPI, 2021-06)
The fabrication of soft magnetic Fe parts by the medium-frequency electrical resistance sintering (MF-ERS) technique is studied in this paper. This consolidation technique involves the simultaneous application to metallic ...
Ponencia
Artículo
Magnetic properties of iron powder sintered by medium-frequency electrical resistance sintering
(Elsevier, 2022)
Medium-frequency electrical resistance sintering (MF-ERS) is a technique that uses the application of pressure and heat, heat coming from the Joule effect, simultaneously to metallic powders. In this study, this technique ...
Artículo
Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
(Elsevier, 2018)
The stress shielding and the poor osseointegration in titanium implants are still problems to be resolved. In this context, this work proposes a balanced solution. Titanium samples were fabricated, with a porosity of ...
Artículo
An approach using highly sensitive carbon nanotube adhesive films for crack growth detection under flexural load in composite structures
(Elsevier, 2019-09)
Sensing capabilities of carbon nanotube (CNT)doped adhesive films under bending conditions were investigated. Standard Mode-II coupons and skin-stringer sub-elements were manufactured while their electrical resistance was ...
Artículo
Influence of Milling Atmosphere on the Controlled Formation of Ultrafine Dispersoids in Al-Based MMCs
(MDPI, 2016)
Properties of compacts made from aluminium powder, milled under different atmospheres, were evaluated. The duration of all the milling processes was 10 h, although different atmospheres were tested: vacuum, confined ...
Artículo
Surface modification of Ti-6Al-4V alloys manufactured by selective laser melting: Microstructural and tribo-mechanical characterization
(Elsevier, 2018)
Medical grade of both titanium (Ti) and Ti6Al4V alloy are recognized as the metallic biomaterials with the better outcomes for clinical repair of bone tissue thanks to their suitable mechanical properties and corrosion ...
Artículo
Influence of Temperature on Mechanical Properties of AMCs
(MDPI, 2020-06)
This research focused on studying the effect of temperature on the mechanical properties of aluminium matrix composites (AMCs) obtained by a powder metallurgy route. Aluminium powder was milled at room temperature for 5 h ...