Buscar
Mostrando ítems 1-10 de 22
Artículo
New 3D Printing Strategy for Structured Carbon Devices Fabrication
(MDPI, 2023)
This work shows a new method for the preparation of 100% carbon-structured devices. The method is based on resorcinol-formaldehyde polymerization, using starch as a binder with the addition of a certain amount of external ...
Artículo
Spinel Ferrite Catalysts for CO2 Reduction Via Reverse Water Gas Shift Reaction
(Elsevier, 2023)
The production of CO via Reverse Water Gas Shift (RWGS) reaction is a suitable route for CO2 valorization. In this study a series of modified spinels AB2O4 (A site = Ni, Zn and Cu and B site=Fe) are investigated as RWGS ...
Artículo
Iron-modified ceria and Au/ceria catalysts for Total and Preferential Oxidation of CO (TOX and PROX)
(Elsevier, 2010)
Iron-modified ceria supports containing different molar percentages of Fe (0%, 10%, 25%, and 50%) were synthesized by thermal decomposition of the metal propionates. The formation of a Ce-Fe oxide solid solution is evidenced ...
Artículo
Influence of the O2/CO ratio and the presence of H2O and CO2 in the feed-stream during the preferential oxidation of CO (PROX) over a CuOx/CeO2-coated microchannel reactor
(Elsevier, 2013)
The catalytic performance of a CuOx/CeO2 powder catalyst and that of a microchannel reactor or microreactor (MR) coated with the same solid was determined and compared. The catalytic activity measurements were carried out ...
Artículo
Hydrogen production by methanol steam reforming on NiSn/MgO-Al 2O3 catalysts: The role of MgO addition
(Elsevier, 2011)
The effect of the magnesia loading on the surface structure and catalytic properties of NiSn/MgO-Al2O3 catalysts for hydrogen production by methanol steam reforming has been investigated. The catalysts have been obtained ...
Artículo
Fischer-Tropsch synthesis in microchannels
(Elsevier, 2011)
Different metallic supports (aluminum foams of 40ppi, honeycomb monolith and micromonolith of 350 and 1180cpsi, respectively) have been loaded with a 20%Co-0.5%Re/γ-Al2O3 catalyst by the washcoating method. Layers of ...
Artículo
Gold supported on metal-doped ceria catalysts (M = Zr, Zn and Fe) for the preferential oxidation of CO (PROX)
(Academic Press, 2010)
A series of ceria oxides doped with 10 mol.% of Zr, Zn and Fe have been prepared by a pseudo sol-gel method throughout the thermal decomposition of the corresponding metallic propionates. With these supports, 1 wt.% gold ...
Artículo
Sub-ambient CO oxidation over Au/MO x/CeO 2-Al 2O 3 (M = Zn or Fe)
(Elsevier, 2012)
A series of ZnO and Fe 2O 3 modified ceria/alumina supports and their corresponding gold catalyst were prepared and studied in the CO oxidation reaction. ZnO-doped solids show a superior catalytic activity compared to the ...
Artículo
Ni-CeO2/C Catalysts with Enhanced OSC for the WGS Reaction
(MDPI AG, 2015)
In this work, the WGS performance of a conventional Ni/CeO2 bulk catalyst is compared to that of a carbon-supported Ni-CeO2 catalyst. The carbon-supported sample resulted to be much more active than the bulk one. The higher ...
Artículo
Gold Nanoparticles on Yttrium Modified Titania: Support Properties and Catalytic Activity
(Baltzer Science Publishers, 2011)
A series of titanium oxide catalysts modified with yttrium has been prepared by sol¿gel method and their structural properties have been studied. The incorporation of yttrium in the titania lattice favors the formation of ...