Buscar
Mostrando ítems 1-9 de 9
Artículo
Influence of processing parameters on the conduct of electrical resistance sintering of iron powders
(MDPI, 2020-04)
The influence of the applied pressure and electrical parameters on the macrostructure of specimens consolidated by the medium-frequency electrical resistance sintering technique (MF-ERS) is analysed in this work. This ...
Artículo
Modelling and Simulation of the Electrical Resistance Sintering Process of Iron Powders
(Korean Institute of Metals and Materials, 2020-07)
In this paper, the process known as Electrical Resistance Sintering under Pressure is modelled, simulated and validated. This consolidation technique consists of applying a high-intensity electrical current to a metallic ...
Artículo
Influence of Milling Atmosphere on the Controlled Formation of Ultrafine Dispersoids in Al-Based MMCs
(MDPI, 2016)
Properties of compacts made from aluminium powder, milled under different atmospheres, were evaluated. The duration of all the milling processes was 10 h, although different atmospheres were tested: vacuum, confined ...
Artículo
Nickel Porous Compacts Obtained by Medium-Frequency Electrical Resistance Sintering
(MDPI, 2020-05)
A commercially pure (c.p.) nickel powder was consolidated by Medium-Frequency Electrical Resistance Sintering (MF-ERS). In this consolidation technique, a pressure and the heat released by a high-intensity and low-voltage ...
Artículo
Consolidation by MF-ERS of mechanically alloyed Al powder
(Elsevier, 2019-07)
The aim of this work is to study the viability of producing, by medium-frequency electrical resistance sintering (MF-ERS), compacts from mechanically alloyed aluminium powders. The MF-ERS process was carried out using ...
Artículo
La ayuda oficial española al sector de la energía: demasiadas condiciones
(Ingenierías sin Fronteras, 2006)
En el estudio Ayuda Oficial al Desarrollo en Energía elaborado en 2005 por Ingeniería Sin Fronteras (ISF) y Greenpeace se hace una caracterización de la ayuda oficial al desarrollo (AOD) española destinada al sector ...
Artículo
In Situ Synthesis of Al-Based MMCs Reinforced with AlN by Mechanical Alloying under NH3 Gas
(MDPI, 2018)
Aluminum matrix composites (AMCs) reinforced by aluminum nitride were prepared by mechanical alloying followed by a simple press and sintering method. Milling began under vacuum and after a period of between 1 and 4 h, ...
Artículo
Medium-frequency electrical resistance sintering of oxidized C.P. iron powder
(MDPI, 2018)
Commercially pure (C.P.) iron powders with a deliberate high degree of oxidation were consolidated by medium-frequency electrical resistance sintering (MF-ERS). This is a consolidation technique where pressure, and heat ...
Artículo
A Method to Determine the Electrical Resistance of a Metallic Powder Mass under Compression
(MDPI, 2017-11-06)
In this paper, a phenomenological model to predict the value of the electrical resistance of a compressed metal powder mass is proposed. The model, based on the experimental compressibility and resistivity-porosity curves, ...