Buscar
Mostrando ítems 1-10 de 27
Ponencia
Use of Urea and Ammonia to Produce High-Strength PM Aluminium Parts
(European Powder Metallurgy Association (EPMA), 2011)
Two methods to obtain bulk nanostructured aluminium parts are compared. The first one consists on milling Al powder in an ammonia gas atmosphere. In the second method, the Al powder is milled in vacuum with the addition ...
Artículo
Fracture toughness of cemented carbides obtained by electrical resistance sintering
(Elsevier, 2019)
The unique combination of hardness, toughness and wear resistance exhibited by WC-Co cemented carbides (hardmetals) has made them a preeminent material choice for extremely demanding applications, such as metal cutting/forming ...
Artículo
Medium-Frequency Electrical Resistance Sintering of Soft Magnetic Powder Metallurgy Iron Parts
(MDPI, 2021-06)
The fabrication of soft magnetic Fe parts by the medium-frequency electrical resistance sintering (MF-ERS) technique is studied in this paper. This consolidation technique involves the simultaneous application to metallic ...
Artículo
Polvos de Al-Al 3Ti obtenidos mediante aleado mecánico y tratamiento térmico
(2005)
Polvos mezclados de aluminio y titanio ( 10 % en peso) han sido aleados mecánicamente en un molino Attritor, obteniéndose una solución metaestable de titanio en la matriz de aluminio. Se han estudiado los cambios producidos ...
Artículo
Production of Ultrafine Grained Hardmetals by Electrical Resistance Sintering
(MDPI, 2019-02)
In this work, powders of cemented ultrafine WC-6 wt.% Co were consolidated. The feasibility of the medium frequency electrical resistance sintering (MF-ERS) technique were studied to prevent WC grain growth during ...
Artículo
Modelling and Simulation of the Electrical Resistance Sintering Process of Iron Powders
(Korean Institute of Metals and Materials, 2020-07)
In this paper, the process known as Electrical Resistance Sintering under Pressure is modelled, simulated and validated. This consolidation technique consists of applying a high-intensity electrical current to a metallic ...
Artículo
Influence of Milling Atmosphere on the Controlled Formation of Ultrafine Dispersoids in Al-Based MMCs
(MDPI, 2016)
Properties of compacts made from aluminium powder, milled under different atmospheres, were evaluated. The duration of all the milling processes was 10 h, although different atmospheres were tested: vacuum, confined ...
Artículo
Nickel Porous Compacts Obtained by Medium-Frequency Electrical Resistance Sintering
(MDPI, 2020-05)
A commercially pure (c.p.) nickel powder was consolidated by Medium-Frequency Electrical Resistance Sintering (MF-ERS). In this consolidation technique, a pressure and the heat released by a high-intensity and low-voltage ...
Patente. Invención
Molienda mecánica de polvos activada por radiación ultravioleta
(Oficina Española de Patentes y Marcas (OEPM), 2007-05-16)
Molienda mecánica de polvos activada por radiación ultravioleta. La presente invención tiene por objeto la molienda mecánica de polvos activada por radiación ultravioleta, lo que permite la mejora de las características ...
Tesis Doctoral
Fabricación de núcleos magnéticos amorfos mediante consolidación eléctrica
(2022-05-16)
Se estudia la fabricación de núcleos magnéticos amorfos (destinados principalmente a motores y transformadores eléctricos) mediante una nueva técnica consistente en: (1) obtención de partículas ferromagnéticas amorfizadas ...