Buscar
Mostrando ítems 1-10 de 16
Artículo
Fracture toughness of cemented carbides obtained by electrical resistance sintering
(Elsevier, 2019)
The unique combination of hardness, toughness and wear resistance exhibited by WC-Co cemented carbides (hardmetals) has made them a preeminent material choice for extremely demanding applications, such as metal cutting/forming ...
Artículo
Medium-Frequency Electrical Resistance Sintering of Soft Magnetic Powder Metallurgy Iron Parts
(MDPI, 2021-06)
The fabrication of soft magnetic Fe parts by the medium-frequency electrical resistance sintering (MF-ERS) technique is studied in this paper. This consolidation technique involves the simultaneous application to metallic ...
Artículo
Polvos de Al-Al 3Ti obtenidos mediante aleado mecánico y tratamiento térmico
(2005)
Polvos mezclados de aluminio y titanio ( 10 % en peso) han sido aleados mecánicamente en un molino Attritor, obteniéndose una solución metaestable de titanio en la matriz de aluminio. Se han estudiado los cambios producidos ...
Artículo
Production of Ultrafine Grained Hardmetals by Electrical Resistance Sintering
(MDPI, 2019-02)
In this work, powders of cemented ultrafine WC-6 wt.% Co were consolidated. The feasibility of the medium frequency electrical resistance sintering (MF-ERS) technique were studied to prevent WC grain growth during ...
Artículo
Influence of Milling Atmosphere on the Controlled Formation of Ultrafine Dispersoids in Al-Based MMCs
(MDPI, 2016)
Properties of compacts made from aluminium powder, milled under different atmospheres, were evaluated. The duration of all the milling processes was 10 h, although different atmospheres were tested: vacuum, confined ...
Patente. Invención
Molienda mecánica de polvos activada por radiación ultravioleta
(Oficina Española de Patentes y Marcas (OEPM), 2007-05-16)
Molienda mecánica de polvos activada por radiación ultravioleta. La presente invención tiene por objeto la molienda mecánica de polvos activada por radiación ultravioleta, lo que permite la mejora de las características ...
Artículo
Influence of Temperature on Mechanical Properties of AMCs
(MDPI, 2020-06)
This research focused on studying the effect of temperature on the mechanical properties of aluminium matrix composites (AMCs) obtained by a powder metallurgy route. Aluminium powder was milled at room temperature for 5 h ...
Artículo
Nanocrystalline Al Composites from Powder Milled under Ammonia Gas Flow
(Hindawi Publishing Corporation, 2014)
The production of high hardness and thermally stable nanocrystalline aluminium composites is described. Al powder was milled at room temperature in an ammonia flow for a period of less than 5 h. NH3 dissociation during ...
Artículo
Obtención y procesado de aleaciones de grano ultrafino, nanométrico y amorfas mediante aleado mecánico
(Centro nacional de Investigaciones Metalurgicas, 2007)
El Grupo de Metalurgia e Ingeniería de los Materiales de la Universidad de Sevilla ha desarrollado, durante los últimos quince años, diversas técnicas para la consolidación de aleaciones de aluminio obtenidas por aleado ...
Ponencia
High temperature behavior of nanostructured Al powders obtained by mechanical alloying under NH3 flow
(American Institute of Physics Inc., 2015-03)
Aluminium powder was mechanically alloyed under ammonia gas flow for different times (1-5 h) in order to produce a second-phase reinforcement, mainly by aluminium nitride (AlN). After milling, powders were consolidated ...