Buscar
Mostrando ítems 11-20 de 99
Artículo
On the order of magnetic transition in MnCo1−xFexGe (x = 0.20, 0.06 and 0.03) mechanical alloys
(Elsevier, 2023)
Mechanically amorphized MnCo1−xFexGe alloys (x = 0.20, 0.06 and 0.03) were used as precursors to obtain hexagonal austenite single phase samples. Combining thermomagnetic and magnetocaloric analysis and in situ X-ray ...
Artículo
Rietveld analysis and mechanical properties of in situ formed La-β-Al2O3/Al2O3 composites prepared by sol-gel method
(Elsevier, 2022)
In this work, the crystal evolution of α-Al2O3 composites reinforced with LBA platelets were monitored by XRD Rietveld. In addition, the mechanical properties of totally densified specimens were researched by Vickers ...
Artículo
Structural, Vibrational, and Magnetic Characterization of Orthoferrite LaFeO3 Ceramic Prepared by Reaction Flash Sintering
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)
LaFeO3 perovskite ceramics have been prepared via reaction flash technique using Fe2O3 and La2O3 as precursors. The obtained pellets have been investigated using several techniques. The formation of LaFeO3 has been clearly ...
Artículo
Powder-metallurgy fabrication of ZrB2-hardened Zr3Al2intermetallic composites by high-energy ball-milling and reactive spark-plasma sintering
(Elsevier, 2022)
A powder metallurgy route combining high-energy ball-milling (HEBM) of elemental powders and reactive spark-plasma sintering (SPS) is proposed for the controlled fabrication of novel composites based on a Zr-Al intermetallic ...
Artículo
Specific Heat Measurements on Amorphous and Nanocrystalline Al88Y5Ni5Co2
(Elsevier, 2009)
Specific heat at constant pressure, CP, was measured on amorphous and nanocrystalline Al88Y5Ni5Co2 alloys from differential scanning calorimetry experiments. Linear behavior of CP versus temperature from 323 to 423 K is ...
Artículo
Enhancement of the Magnetic Refrigerant Capacity in Partially Amorphous Fe 70Zr 30 Powders Obtained by Mechanical Alloying
(Elsevier, 2012)
After mechanical alloying Fe 70Zr 30 composition from pure starting powders, an amorphous phase with Curie temperature T C = 244 K and an intermetallic compound (that should be non-stoichiometric Zr-rich fcc Fe 2Zr phase) ...
Artículo
Crystallization behavior and magnetic properties of Cu-containing Fe- Cr- Mo- Ga- P- C- B alloys
(2006)
Multicomponent Fe65.5Cr4Mo4Ga4P12C5B5.5 amorphous alloy is known to have good soft magnetic properties combined with large glass-forming ability. Searching for a nanocrystalline structure that could improve its magnetic ...
Artículo
Excellent Cryogenic Magnetocaloric Properties in Heavy Rare-earth Based HRENiGa2 (HRE = Dy, Ho, or Er) Compounds
(Science Press, 2023)
RENiX2 compounds, where RE = rare-earth element and X = p-block element, have been highly regarded for cryogenic magnetocaloric applications. Depending on the elements, they can crystallize in CeNiSi2-type, NdNiGa2-type, ...
Artículo
Cellular automata simulations on nanocrystallization processes: From instantaneous growth approximation to limited growth
(Elsevier, 2011-07)
Cellular automata simulations have been performed to simulate the crystallization process under a limited growth approximation. This approximation resembles several characteristics exhibited by nanocrystalline microstructures ...
Artículo
Supersaturated Solid Solution Obtained by Mechanical Alloying of 75% Fe, 20% Ge and 5% Nb Mixture at Different Milling Intensities
(Elsevier, 2009)
Mechanical alloying process of Fe75Ge20Nb5 composition has been studied at different milling frequencies from initial pure powder mixture to the development of a single bcc phase (supersaturated solid solution). As an ...