Buscar
Mostrando ítems 1-10 de 27
Artículo
Direct magnetocaloric measurements of Fe-B-Cr-X (X = La, Ce) amorphous ribbons
(American Institute of Physics, 2011)
A procedure has been developed to directly measure the adiabatic temperature change of amorphous melt-spun Fe-based ribbons displaying attractive room temperature magnetocaloric properties. Polycrystalline Gd ribbons are ...
Artículo
Additive manufacturing of magnetocaloric (La,Ce)(Fe,Mn,Si)13–H particles via polymer-based composite filaments
(Elsevier, 2022-11)
Additive manufacturing could be an excellent way of shaping magnetocaloric heat exchangers in magnetic refrigerators. However, the metal additive manufacturing techniques present the serious limitation that the melting of ...
Artículo
Enhancement of the Magnetic Refrigerant Capacity in Partially Amorphous Fe 70Zr 30 Powders Obtained by Mechanical Alloying
(Elsevier, 2012)
After mechanical alloying Fe 70Zr 30 composition from pure starting powders, an amorphous phase with Curie temperature T C = 244 K and an intermetallic compound (that should be non-stoichiometric Zr-rich fcc Fe 2Zr phase) ...
Artículo
Excellent Cryogenic Magnetocaloric Properties in Heavy Rare-earth Based HRENiGa2 (HRE = Dy, Ho, or Er) Compounds
(Science Press, 2023)
RENiX2 compounds, where RE = rare-earth element and X = p-block element, have been highly regarded for cryogenic magnetocaloric applications. Depending on the elements, they can crystallize in CeNiSi2-type, NdNiGa2-type, ...
Artículo
Supersaturated Solid Solution Obtained by Mechanical Alloying of 75% Fe, 20% Ge and 5% Nb Mixture at Different Milling Intensities
(Elsevier, 2009)
Mechanical alloying process of Fe75Ge20Nb5 composition has been studied at different milling frequencies from initial pure powder mixture to the development of a single bcc phase (supersaturated solid solution). As an ...
Artículo
Thermal and Microstructural Dependence of the Initial Permeability of Co60Fe18Nb6(B,Cu)16 Alloys
(Elsevier, 2007)
The thermal and microstructural dependence of the initial permeability of Co60Fe18Nb6B16-yCuy (y = 0, 1) alloys have been studied. The comparison of kinetics and microstructural data of the two compositions indicate the ...
Artículo
An Equivalent Time Approach for Scaling the Mechanical Alloying Processes
(Elsevier, 2008)
Dynamics of a single ball into a planetary ball mill is analyzed leading to a cubic dependence of the power transferred during milling with the rotational speed, Ω. This leads to the definition of an equivalent time to ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
Tunable Magnetocaloric Effect Towards Cryogenic Range by Varying Mn:Ni Ratio in All-d-metal Ni(Co)-Mn-Ti Heusler Alloys
(Elsevier, 2023)
Cryogenic magnetic refrigeration is a highly efficient and environmentally friendly technique for gas liquefaction. However, refrigerant materials undergoing large magnetocaloric response at the interesting cryogenic range ...