Buscar
Mostrando ítems 1-10 de 25
Artículo
Ultra-low Hysteresis in Giant Magnetocaloric Mn1-xVxFe0.95(P,Si,B) Compounds
(Elsevier, 2023)
Large thermal hysteresis in the (Mn,Fe)2(P,Si) system hinders an efficient heat exchange and thus limits the magnetocaloric applications. Substitution of manganese by vanadium in the Mn1-x1Vx1Fe0.95P0.593Si0.33B0.077 and ...
Artículo
Ball Milling of Fe83Zr6B10Cu1 Amorphous Alloy Containing Quenched in Crystals
(Elsevier, 2007)
A Fe83B10Zr6Cu1 melt-spun amorphous alloy has been ball milled in the presence of partially crystalline ribbon pieces, in order to speed up its mechanical nanocrystallization process. Microstructure and magnetic properties ...
Artículo
Enhancement of the Magnetic Refrigerant Capacity in Partially Amorphous Fe 70Zr 30 Powders Obtained by Mechanical Alloying
(Elsevier, 2012)
After mechanical alloying Fe 70Zr 30 composition from pure starting powders, an amorphous phase with Curie temperature T C = 244 K and an intermetallic compound (that should be non-stoichiometric Zr-rich fcc Fe 2Zr phase) ...
Artículo
Excellent Cryogenic Magnetocaloric Properties in Heavy Rare-earth Based HRENiGa2 (HRE = Dy, Ho, or Er) Compounds
(Science Press, 2023)
RENiX2 compounds, where RE = rare-earth element and X = p-block element, have been highly regarded for cryogenic magnetocaloric applications. Depending on the elements, they can crystallize in CeNiSi2-type, NdNiGa2-type, ...
Artículo
Supersaturated Solid Solution Obtained by Mechanical Alloying of 75% Fe, 20% Ge and 5% Nb Mixture at Different Milling Intensities
(Elsevier, 2009)
Mechanical alloying process of Fe75Ge20Nb5 composition has been studied at different milling frequencies from initial pure powder mixture to the development of a single bcc phase (supersaturated solid solution). As an ...
Artículo
Thermal and Microstructural Dependence of the Initial Permeability of Co60Fe18Nb6(B,Cu)16 Alloys
(Elsevier, 2007)
The thermal and microstructural dependence of the initial permeability of Co60Fe18Nb6B16-yCuy (y = 0, 1) alloys have been studied. The comparison of kinetics and microstructural data of the two compositions indicate the ...
Artículo
Anisotropy field distribution in soft magnetic Hitperm alloys submitted to different field annealing processes
(Elsevier, 2016)
The magnetic anisotropy field distribution is discussed for Hitperm alloys annealed under different field conditions leading to different induced magnetic anisotropies: zero (ZF), transversal (TF), and longitudinal (LF) ...
Artículo
An Equivalent Time Approach for Scaling the Mechanical Alloying Processes
(Elsevier, 2008)
Dynamics of a single ball into a planetary ball mill is analyzed leading to a cubic dependence of the power transferred during milling with the rotational speed, Ω. This leads to the definition of an equivalent time to ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Magnetic Multilayers as a Way to Increase the Magnetic Field Responsiveness of Magnetocaloric Materials
(American Scientific Publishers, 2012)
The magnetocaloric response of Ni–Cu based multilayers has been studied with the aim of optimizing their magnetic field dependence. In contrast to the behavior of single phase materials, whose peak magnetic entropy change ...