Buscar
Mostrando ítems 1-10 de 13
Artículo
Enhancement of the Magnetic Refrigerant Capacity in Partially Amorphous Fe 70Zr 30 Powders Obtained by Mechanical Alloying
(Elsevier, 2012)
After mechanical alloying Fe 70Zr 30 composition from pure starting powders, an amorphous phase with Curie temperature T C = 244 K and an intermetallic compound (that should be non-stoichiometric Zr-rich fcc Fe 2Zr phase) ...
Artículo
Anisotropy field distribution in soft magnetic Hitperm alloys submitted to different field annealing processes
(Elsevier, 2016)
The magnetic anisotropy field distribution is discussed for Hitperm alloys annealed under different field conditions leading to different induced magnetic anisotropies: zero (ZF), transversal (TF), and longitudinal (LF) ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Magnetic Multilayers as a Way to Increase the Magnetic Field Responsiveness of Magnetocaloric Materials
(American Scientific Publishers, 2012)
The magnetocaloric response of Ni–Cu based multilayers has been studied with the aim of optimizing their magnetic field dependence. In contrast to the behavior of single phase materials, whose peak magnetic entropy change ...
Artículo
A quantitative criterion for determining the order of magnetic phase transitions using the magnetocaloric effect
(Nature Publishing Group, 2018)
The ideal magnetocaloric material would lay at the borderline of a first-order and a second-order phase transition. Hence, it is crucial to unambiguously determine the order of phase transitions for both applied magnetocaloric ...
Artículo
Two Milling Time Regimes in the Evolution of Magnetic Anisotropy of Mechanically Alloyed Soft Magnetic Powders
(Elsevier, 2011)
The milling time evolution of magnetic anisotropy of ball milled powders can be described considering two regimes. First, for short milling times, the main factor affecting the magnetic behavior of the alloy is the ...
Artículo
Study of the Induced Anisotropy in Field Annealed Hitperm Alloys by Mössbauer Spectroscopy and Kerr Microscopy
(Springer Nature, 2016)
Samples of Fe39Co39Nb6B15Cu1 alloy were nanocrystallized under zero field annealing (ZF) and transverse field annealing (TF) conditions. A reduction in coercivity for TF samples with respect to ZF sample (16 and 45 A/m, ...
Artículo
Modification of the order of the magnetic phase transition in cobaltites without changing their crystal space group
(Elsevier, 2019-03)
It has been found that GdBa1-xSrxCo2O6-δ can exhibit consecutive magnetic transitions: antiferromagnetic-ferromagnetic (AFM-FM) transition followed by ferromagnetic-paramagnetic transition (FM-PM), which give rise to a ...
Artículo
Nanostructuring as a procedure to control the field dependence of the magnetocaloric effect
(Elsevier, 2017-01)
In this work, the field dependence of the magnetocaloric effect of Gd bulk samples has been enhanced through nanostructuring of the material. Nanostructuring consists in multilayers preparation by alternative rf-sputter ...
Artículo
Correction of the Shape Effect on Magnetic Entropy Change in Ball Milled Fe70Zr30 Alloys
(Elsevier, 2018)
The field dependence of the magnetic entropy change (ΔSM) after mechanical alloying of Fe70Zr30 composition starting from high purity powders is studied. Samples with different shapes and different crystalline fraction X ...