Artículo
A new model of the carbonator reactor in the Calcium Looping technology for post-combustion CO2 capture
Autor/es | Ortiz Domínguez, Carlos
Chacartegui, Ricardo Valverde Millán, José Manuel Becerra Villanueva, José Antonio Pérez Maqueda, Luis Allan |
Departamento | Universidad de Sevilla. Departamento de Ingeniería Energética Universidad de Sevilla. Departamento de Electrónica y Electromagnetismo Universidad de Sevilla. Departamento de Química Inorgánica |
Fecha de publicación | 2015 |
Fecha de depósito | 2017-01-20 |
Publicado en |
|
Resumen | The Ca-Looping (CaL) process is considered as a promising technology for CO2 post-combustion capture in power
generation plants yielding a minor penalty on plant performance as compared with other capture technologies ... The Ca-Looping (CaL) process is considered as a promising technology for CO2 post-combustion capture in power generation plants yielding a minor penalty on plant performance as compared with other capture technologies such as conventional amine-based capture systems. This manuscript presents a new carbonator reactor model based on lab-scale multicyclic CaO conversion results, which take into account realistic CaO regeneration conditions that necessarily involve calcination under high CO2 partial pressure and high temperature. Under these conditions, CaO conversion in the diffusion controlled stage is a relevant contribution to the carbonation degree in the typical residence times. The main novelty of the model proposed in the present work is the consideration of the capture efficiency in the diffusion controlled phase of carbonation. It is demonstrated that increasing the residence time by a few minutes in the carbonator yields a significant improvement of the capture efficiency. Model predictions are shown to agree with experimental results retrieved from pilot-scale tests. The new model allows a more accurate evaluation and prediction of carbonator’s performance over a wider range of residence times. The results obtained may be relevant for the optimization of CaL operation parameters to be integrated in real power plants. |
Cita | Ortiz, C., Chacartegui, R., Valverde Millán, J.M., Becerra Villanueva, J.A. y Pérez Maqueda, L.A. (2015). A new model of the carbonator reactor in the Calcium Looping technology for post-combustion CO2 capture. Fuel, 160, 328-338. |
Ficheros | Tamaño | Formato | Ver | Descripción |
---|---|---|---|---|
A new model of the carbonator ... | 658.6Kb | [PDF] | Ver/ | |