Artículo
Análisis y aprovechamiento de la energía térmica por fricción en película semisólida rotatoria de aleación Cu-Sn, bajo los efectos de alta presión
Título alternativo | Analysis and utilization of the thermal energy by friction in semi-solid rotating film of Cu-Sn alloy, under the effects of high pressure |
Autor/es | Guasumba-Codena, José
Lillo Bravo, Isidoro Abatta Jácome, Lenin Buñay Andrade, Román |
Departamento | Universidad de Sevilla. Departamento de Ingeniería Energética |
Fecha de publicación | 2016 |
Fecha de depósito | 2023-12-05 |
Publicado en |
|
Resumen | El presente trabajo, consiste en la investigación y el desarrollo experimental de un nuevo dispositivo de generación de calor por fricción deslizante, en película térmica. Este tercer cuerpo, se forma por la energía mecánica ... El presente trabajo, consiste en la investigación y el desarrollo experimental de un nuevo dispositivo de generación de calor por fricción deslizante, en película térmica. Este tercer cuerpo, se forma por la energía mecánica de rotación, la fuerza de aplastamiento axial, y la temperatura de contacto entre un par de rozamiento bronce, acero. En la transformación de la energía mecánica en térmica, la temperatura superficial del acero es de 266 °C y 215°C para el bronce. En lo referente al caldero, la temperatura del vapor alcanza los 150°C, y presión interna de 60 Psi, durante un tiempo de calentamiento y vaporización de 60 minutos. Para realizar las pruebas de funcionamiento del vaporizador por fricción, se utiliza una máquina con potencia de 5 kW, que transfiere al caldero el torque y el empuje necesario para producir calor útil. Por otra parte, la velocidad de rotación del eje, en este ensayo es de 416 RPM., y la fuerza de empuje axial de 2000 N. This project consists on the research and experimental development, of a new device for heat generation by sliding friction, into thermal film. The third body is formed by the mechanical energy of rotation, the axial ... This project consists on the research and experimental development, of a new device for heat generation by sliding friction, into thermal film. The third body is formed by the mechanical energy of rotation, the axial force, and the contact temperature between a pair of friction bronze and steel. In the change of mechanical energy to heat, the temperature surface of the steel is 266 °C and 215 °C for the bronze. In regard to the boiler, the steam temperature reaches 150 °C, and internal pressure of 60 psi. One hour is the time for heating and vaporization of water. To perform functional testing of steam boiler by friction, is using a machine with power of 5 kW, which transfers the torque to the boiler and the push needed to produce useful heat. On the other hand, the speed of rotation of the shaft, in this test is 416 RPM. And the axial thrust force 2000 N |
Cita | Guasumba-Codena, J., Lillo Bravo, I., Abatta Jácome, L. y Buñay Andrade, R. (2016). Análisis y aprovechamiento de la energía térmica por fricción en película semisólida rotatoria de aleación Cu-Sn, bajo los efectos de alta presión. Aporte Santiaguino, 9 (1), 49-60. https://doi.org/https://doi.org/10.32911/as.2016.v9.n1.212. |
Ficheros | Tamaño | Formato | Ver | Descripción |
---|---|---|---|---|
AS_2016_LilloBravo_Analisis.pdf | 779.0Kb | [PDF] | Ver/ | |