Artículo
R-curve Evaluation of 3YTZP/Graphene Composites by Indirect Compliance Method
Autor/es | López Pernía, Cristina
Muñoz Ferreiro, Carmen Prada Rodrigo, J. Moreno, P. Reveron, H. Chevalier, J. Morales Rodríguez, Ana Poyato Galán, Rosalía Gallardo López, Ángela María |
Departamento | Universidad de Sevilla. Departamento de Física de la Materia Condensada |
Fecha de publicación | 2023 |
Fecha de depósito | 2023-09-19 |
Publicado en |
|
Resumen | This work addresses the crack growth resistance of 3 mol% Yttria-doped Tetragonal Zirconia Polycrystalline (3YTZP) spark-plasma sintered (SPS) composites containing two types of graphene-based nanomaterials (GBN): exfoliated ... This work addresses the crack growth resistance of 3 mol% Yttria-doped Tetragonal Zirconia Polycrystalline (3YTZP) spark-plasma sintered (SPS) composites containing two types of graphene-based nanomaterials (GBN): exfoliated graphene nanoplatelets (e-GNP) and reduced graphene oxide (rGO). The crack growth resistance of the composites is assessed by means of their R-Curve behavior determined by three-point bending tests on single edge “V” notched beams (SEVNB), in two different orientations of the samples: with the crack path perpendicular or parallel to the pressure axis during the SPS sintering. The sharp edge notches were machined by ultrashort laser pulsed ablation (UPLA). The compliance and optical-based methods for evaluating the crack length are compared on the basis of the experimental R-Curve results in composites with 2.5 vol% rGO tested in the perpendicular orientation. Moreover, the activation of reinforcement mechanisms is evaluated by both the fracture surface inspection by Scanning Electron Microscopy and a compliance analysis. It is shown that the indirect compliance method is relevant and reliable for calculating the R-Curve of 3YTZP/GBN composites. The effect of the type and content of GBN on the crack growth resistance of the composites is also discussed. |
Agencias financiadoras | Ministerio de Ciencia e Innovación (MICIN). España Junta de Andalucía Agencia Estatal de Investigación. España Universidad de Sevilla Junta de Castilla-León Ministerio de Ciencia, Innovación y Universidades (MICINN). España |
Identificador del proyecto | PGC 2018-101377-B-100
PID2020-119003GB-I00 P20_01024 BES-2016-078711 USE-18740-H SA136P20 FPU17/01859 |
Cita | López Pernía, C., Muñoz Ferreiro, C., Prada Rodrigo, J., Moreno, P., Reveron, H., Chevalier, J.,...,Gallardo López, Á.M. (2023). R-curve Evaluation of 3YTZP/Graphene Composites by Indirect Compliance Method. Journal of the European Ceramic Society, 43 (8), 3486-3497. https://doi.org/10.1016/j.jeurceramsoc.2023.02.002. |
Ficheros | Tamaño | Formato | Ver | Descripción |
---|---|---|---|---|
R-curve evaluation.pdf | 8.004Mb | [PDF] | Ver/ | |