Mostrar el registro sencillo del ítem

Trabajo Fin de Grado

dc.contributor.advisorMorato-Moreno, Manueles
dc.creatorBabío Perea, Andreaes
dc.date.accessioned2023-02-13T15:52:52Z
dc.date.available2023-02-13T15:52:52Z
dc.date.issued2023
dc.identifier.citationBabío Perea, A. (2023). Modelado y recreación virtual con Catia V.5 del avión Stinson Reliant Model SR. (Trabajo Fin de Grado Inédito). Universidad de Sevilla, Sevilla.
dc.identifier.urihttps://hdl.handle.net/11441/142674
dc.description.abstractCon el presente trabajo se pretende recuperar el patrimonio histórico aeronáutico mediante la recreación virtual con el software CATIA V5 del monoplano de turismo con capacidad de hasta cinco plazas, Stinson Reliant Model SR. En primer lugar, se presenta una contextualización de la empresa que da nombre al avión, así como las principales características de la aeronave a modelar. Seguidamente, se introducen los planos y el material necesario para la recreación virtual de la aeronave. El grueso del trabajo consiste en el modelado de las diferentes partes del avión mediante los módulos Part Design y Generative Shape Design. Para ello se ha comenzado diseñando el fuselaje, luego las alas y estabilizadores, a continuación el motor y la hélice, y para terminar el tren de aterrizaje. Finalmente, una vez diseñadas todas las partes del avión, se unen utilizando el módulo de ensamblaje, Assembly Design, aplicándole las restricciones necesarias para obtener entre todos los elementos modelados. Además, se concluye añadiendo unas imágenes renderizadas de la aeronave modelada con el software CATIA V5 frente a la original.es
dc.description.abstractThe present work is intended to recover the aeronautical historical heritage through the virtual recreation with CATIA V5 software of the Stinson Reliant Model SR tourist monoplane with a capacity of up to five seats. First, a contextualization of the company that gives its name to the aircraft is presented, as well as the main characteristics of the aircraft to be modeled. Next, the plans and the material necessary for the virtual recreation of the aircraft are introduced. The bulk of the work consists of modeling the different parts of the aircraft using the Part Design and Generative Shape Design modules. To do this we have started designing the fuselage, then the wings and stabilizers, then the engine and propeller, and finally the landing gear. Finally, once all the parts of the aircraft have been designed, they are joined together using the Assembly Design module, applying the necessary constraints to obtain all the modeled elements. In addition, it is concluded by adding rendered images of the aircraft modeled with CATIA V5 software versus the original.es
dc.formatapplication/pdfes
dc.format.extent120 p.es
dc.language.isospaes
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titleModelado y recreación virtual con Catia V.5 del avión Stinson Reliant Model SRes
dc.typeinfo:eu-repo/semantics/bachelorThesises
dc.type.versioninfo:eu-repo/semantics/publishedVersiones
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses
dc.contributor.affiliationUniversidad de Sevilla. Departamento de Ingeniería Gráficaes
dc.description.degreeUniversidad de Sevilla. Grado en Ingeniería Aeroespaciales

FicherosTamañoFormatoVerDescripción
TFG4422_Babío Perea.pdf47.02MbIcon   [PDF] Ver/Abrir  

Este registro aparece en las siguientes colecciones

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Excepto si se señala otra cosa, la licencia del ítem se describe como: Attribution-NonCommercial-NoDerivatives 4.0 Internacional