Buscar
Mostrando ítems 21-30 de 229
Ponencia
Deformation-diffusion coupled analysis of long-term hydrogen diffusion in nanofilms
(National Technical University of Athens, 2017)
The absorption and desorption of hydrogen in nanomaterials can be characterized by an atomic, deformation-diffusion coupled process with a time scale of the order of seconds to hours. This time scale is beyond the time ...
Tesis Doctoral
Los nuevos tipos estructurales para el siglo XXI
(2011-06-15)
Las obras arquitectónicas de referencia y más representativas de la última década están caracterizadas por una acentuación de su intención de distinguirse sobre otras actuaciones que puedan relacionarse con ellas, bien por ...
Artículo
Effect of Vinyl Flooring on the Modal Properties of a Steel Footbridge
(MDPI AG, 2019-04)
Damping ratios associated with non structural elements play an important role in mitigating the pedestrian-induced vibrations of slender footbridges. In particular, this paper analyses the effect of vinyl flooring on the ...
Artículo
A study of the reproducibility and reliability of the musculo-articular stiffness of the ankle joint
(Elsevier, 2018-06)
The objective of this work was to evaluate the reproducibility, reliability and usefulness of the musculo-articular stiffness (MAS) of the ankle joint, measuring it by the free vibration technique. Seventeen (nine males ...
Ponencia
In-plane shear behaviour of non-crimp fabric laminates by means of 3D finite element analysis
(2013-09)
In order to characterize the in-plane shear behaviour of NCF laminates, experimental off-axis tensile tests of [+45,-45]2S laminates in different loading directions (parallel to the stitching yarns: warp-SP and normal ...
Artículo
Predicting failure load of a non-crimp fabric composite by means of a 3D finite element model including progressive damage
(Elsevier, 2019-10)
A mesoscopic scale 3D finite element model of its representative unit cell is used to study the progressive damage of a [0,90]n non-crimp fabric laminate under compressive loading. The tows of the unit cell have been ...
Artículo
Failure initiation criterion in bonded joints with composites based on singularity parameters and practical procedure for design purposes
(Tailor & Francis, 2015)
Composite to metal adhesively bonded joints generates critical points where geometry and material properties change abruptly. These points (multimaterial corners) are potential locations for failure initiation. There exist ...
Artículo
Steric Interference in Bilayer Graphene with Point Dislocations
(MDPI, 2019-07)
We present evidence of strong steric interference in bilayer graphene containing offset point dislocations. Calculations are carried out with Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) using the ...
Ponencia
Stability of asymmetric grain boundaries in graphene
(National Technical University of Athens, 2017)
In the field of electronics, due to its excellent mechanical and electrical properties, graphene has become the most promising material for the production of next generation thin and flexible graphene-based electronic ...
Artículo
Procedimiento para la obtención de cargas últimas de arcos de perfiles conformados en frío
(IETcc-CSIC, 2015)
En este trabajo se presenta una metodología de cálculo para la determinación de la carga última de arcos circulares con perfiles trapezoidales conformados en frío. Estos elementos de cubierta, sometidos fundamentalmente ...