Listar Mecánica de Medios Continuos y Teoría de Estructuras por título
Mostrando ítems 423-442 de 612
-
Artículo
Microscopical observations of interface cracks from inter-fibre failure under compression in composite laminates
(Elsevier, 2018-07)Matrix/inter-fibre failure is characterized by the appearance at the fibre–matrix interfaces of small debonds that can ...
-
Tesis Doctoral
Microstructural analysis of heated ultra-high-performance fibre-reinforced-concrete under cyclic loading.
(2019-04-08)Concrete is currently the structural material more used in civil engineering and building construction. Nowadays, the ...
-
Ponencia
Modal identification of a pedestrian bridge by output-only analysis
(Society for Experimental Mechanics (SEM), 2005)The modal parameters (natural frequencies, mode shapes and damping ratios) describe the dynamic properties of a mechanical ...
-
Ponencia
Modal Identification of a Pedestrian Bridge by Output-Only Analysis
(Katholieke Universiteit Leuven, Department of Mechanical Engineering, 2006)Modal parameters (natural frequencies, mode shapes and damping ratios) describe the dynamic properties of mechanical ...
-
Ponencia
Model for the seismic analysis of arch dams including interaction effects
(1992)A three-dimensional boundary element model for the seismic analysis of arch dams is presented. The soil and the dam are ...
-
Artículo
Model of dissolution in the framework of tissue engineering and drug delivery
(Springer, 2018-10)Dissolution phenomena are ubiquitously present in biomaterials in many different fields. Despite the advantages of ...
-
Ponencia
Model updating of a historical building by using ambient vibration tests : Chapel of the Würzburg Residence (Germany)
(Víctor Compán Cardiel [etc.], 2015)One of the first difficulties that can be detected in finite element models of historical buildings is the high level of ...
-
Artículo
Modelado del crecimiento de una grieta en modo I a lo largo de una interfaz débil mediante el MEC. Aplicación al ensayo de fractura interlaminar de materiales compuestos
(Grupo Español de Fractura, 2008)Se presenta un estudio numérico de propagación de daño en laminados de materiales compuestos. En particular se estudia ...
-
Artículo
Modeling complex crack paths in ceramic laminates: A novel variational framework combining the phase field method of fracture and the cohesive zone model
(Elsevier Ltd, 2018-07)The competition between crack penetration in the layers and cohesive delamination along interfaces is herein investigated ...
-
Artículo
Modeling elastic wave propagation in fluid-filled boreholes drilled in nonhomogeneous media: BEM – MLPG versus BEM-FEM coupling
(Elsevier, 2017)The efficiency of two coupling formulations, the boundary element method (BEM)-meshless local Petrov–Galerkin (MLPG) versus ...
-
Artículo
Modeling fracture of multidirectional thin-ply laminates using an anisotropic phase field formulation at the macro-scale
(Elsevier, 2023-06)An equivalent single layer approach to model fracture events of multidirectional balanced thin-ply laminates via the use ...
-
Artículo
Modeling of interface cracks in a composite with a fibre bundle under biaxial transverse loads
(Grupo Español de Fractura, 2013)En el presente trabajo se presenta un estudio numérico, donde se caracteriza el inicio y crecimiento de los despegues ...
-
Ponencia
Modelización 3D de “Non-Crimp Fabrics” mediante elementos finitos
(AEMAC, 2003)La aparición de nuevas topologías de materiales compuestos, como los “Non-Crimp Fabrics” (NCF) ha hecho necesario el ...
-
Ponencia
Modelling crowd-structure interaction on an ultra-lightweight FRP footbridge
(Universidad de Valladolid, 2022)Human-Structure Interaction (HSI) may influence the dynamic behaviour of Fibre Reinforced Polymer (FRP) footbridges due ...
-
Artículo
Modelling of acoustic and elastic wave propagation from underground structures using a 2.5D BEM-FEM approach
(Elsevier, 2017-03)This paper presents a numerical method based on a two-and-a-half dimensional (2.5D) boundary element-finite element (BEM-FEM) ...
-
Tesis Doctoral
Modelling the compaction of composite materials with ultrasonic vibrations
(2014-09-29)Los sistemas usuales de fabricación de materiales compuestos, especialmente aquellos empleados en la industria aeronáutica, ...
-
Artículo
Modelling the waviness of the fibres in non-crimp fabric composites using 3D finite element models with straight tows
(Elsevier, 2014-01)A new approach to efficiently model the waviness of the fibres in non-crimp fabric (NCF) composites using mesoscale 3D ...
-
Ponencia
Modelling ultrasonic debulking of tape lamination
(AEMAC (asociación española de materiales compuestos), 2009)A numerical model is presented, which has been developed to study the quality of the ultrasonic debulking of a composite ...
-
Artículo
Modelo de interfase elástica lineal frágil (MIELF) aplicado a problemas tridimensionales con crecimiento de grietas en modo mixto
(Grupo Español de Fractura, 2016-03)En la actualidad, desde un punto de vista numérico, la mayoría de investigaciones sobre los despegues y/o delaminaciones que ...
-
Tesis Doctoral
Modelo del Comportamiento Mecánico del Grafeno y sus Defectos
(2011)La historia de la humanidad está compuesta de muchas otras historias que se entrecruzan y complementan, haciendo avanzar ...