Buscar
Mostrando ítems 1-10 de 20
Artículo
Toughening of complete solid solution cermets by graphite addition
(Elsevier, 2015)
(Ti0.95Ta0.05)(C0.5N0.5)-Co complete solid solution cermets (CSCs) were developed by a mechanochemical synthesis process and a pressureless sintering method. The effect of different percentages of graphite used as a sintering ...
Artículo
Design, processing and characterization of titanium with radial graded porosity for bone implants porosity for bone implants
(Elsevier, 2016-07)
Titanium cylinders with radial graded porosity, which are potentially suitable for biomedical applications (replacement of cortical and trabecular bones involved in different joint and dental restorations), have been ...
Artículo
Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
(Elsevier, 2018)
The stress shielding and the poor osseointegration in titanium implants are still problems to be resolved. In this context, this work proposes a balanced solution. Titanium samples were fabricated, with a porosity of ...
Artículo
Synthesis of a cubic Ti(BCN) advanced ceramic by a solid-gas mechanochemical reaction
(Elsevier, 2019-02)
In this work, a titanium boron carbonitride advanced ceramic was successfully synthesised by a solid-gas mechanochemical reaction in a planetary ball mill from a mixture of elemental Ti, B, and C under nitrogen atmosphere. ...
Artículo
Kinetics of high-temperature oxidation of (Ti,Ta)(CN)-based cermets
(Elsevier, 2016)
The kinetics of the high-temperature oxidation of titanium–tantalum carbonitride-based cermets with different Ti/Ta ratios was studied. Isothermal oxidation tests were conducted under static air for 48 h at temperatures ...
Artículo
Liquid-phase sintering of Ti(C,N)-based cermets. the effects of binder nature and content on the solubility and wettability of hard ceramic phases
(Elsevier, 2013)
Different commercial TiC-TiN/Co/Ni mixtures were used as raw materials for Ti(C,N) cermets, and the effects of the sintering parameters (binder content, binder nature, sintering time and additives) on the final hard ceramic ...
Artículo
Development of multicomponent-multiphase materials based on (Ti, Ta, Nb)CxN1-x carbonitride solid solutions
(Elsevier, 2012)
A set of powdered cermets based on (Ti,Ta,Nb)C xN 1-x carbonitride solid solutions were synthesized from mixtures of elemental powders by a mechanically induced self-sustaining reaction (MSR) method and subsequently sintered ...
Artículo
Absence of the core–rim microstructure in TixTa1 − xCyN1 − y-based cermets developed from a pre-sintered carbonitride master alloy
(Elsevier, 2012)
(Ti,Ta)(C,N) solid solution-based cermets with cobalt as the binder phase were synthesised by a two-step milling process. The titanium–tantalum carbonitride solid solution (the ceramic phase) was obtained via a mechanically ...
Artículo
Spark plasma sintering of TixTa1-xC0.5N0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties
(Elsevier, 2013)
Nanometric powdered TixTa1-xC0.5N0.5-based cermets were fabricated using a mechanically induced self-sustaining reaction and consolidated by spark plasma sintering. Highly dense cermets were obtained, and their chemistry, ...
Artículo
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta)(C,N)-based cermets
(Elsevier, 2013)
Complete solid-solution cermets based on titanium-tantalum carbonitride using a starting nominal composition with 80 wt.% of (Ti0.8Ta 0.2)(C0.5N0.5) and 20 wt.% of Co were performed by pressure-less sintering at 1550 C for ...