Buscar
Mostrando ítems 1-10 de 13
Artículo
Porous titanium substrates coated with a bilayer of bioactive glasses
(Elsevier, 2020-09)
Porous titanium substrates coated by dripping-sedimentation technique with a novel bilayer of (45S5 / 1393) bioactive glasses are proposed to overcome some limitations of the use of titanium for implants, such as the stress ...
Artículo
Aplicaciones del SiC biomórfico como reforzante estructural en hormigones refractarios
(2005)
Una posible aplicación del SiC biomórfico (bioSiC) son los reforzante estructural en hormigones refractarios. En este caso se han fabricado piezas de bioSiC con forma de cilindros alargados, 3-4 mm de diámetro y 30-35 mm ...
Artículo
Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere
(MDPI, 2020-01)
This research was carried out to determinate the effect of the atmosphere processing conditions (air and argon) and two specific thermal treatments, on the properties of specimens made from the nickel-based alloy Hastelloy ...
Artículo
Influence of nano-reinforcements on the mechanical properties and microstructure of titanium matrix composites
(Elsevier, 2011)
The goal of this work is the evaluation of nanoscaled reinforcements; in particular nanodiamonds (NDs) and carbon nanotubes (CNTs) on properties of titanium matrix composites (TiMMCs). By using nano sized materials as ...
Artículo
An approach using highly sensitive carbon nanotube adhesive films for crack growth detection under flexural load in composite structures
(Elsevier, 2019-09)
Sensing capabilities of carbon nanotube (CNT)doped adhesive films under bending conditions were investigated. Standard Mode-II coupons and skin-stringer sub-elements were manufactured while their electrical resistance was ...
Artículo
Influence of Processing Conditions on the Mechanical Properties of 17-4PH Specimens Produced by Additive Manufacturing
(MDPI, 2022-11)
The purpose of this research is to study the influence of the processing conditions that affect the final behaviour of specimens made from a 17-4PH composition powder without the necessary thermal treatment to be considered ...
Artículo
Influence of Temperature on Mechanical Properties of AMCs
(MDPI, 2020-06)
This research focused on studying the effect of temperature on the mechanical properties of aluminium matrix composites (AMCs) obtained by a powder metallurgy route. Aluminium powder was milled at room temperature for 5 h ...
Artículo
Effect of processing atmosphere and secondary operations on the mechanical properties of additive manufactured AISI 316L stainless steel by Plasma Metal Deposition
(MDPI, 2020-08)
Plasma metal deposition (PMD) is an interesting additive technique whereby diverse materials can be employed to produce end parts with complex geometries. This study investigates not only the effects of the manufacturing ...
Artículo
Hot-Pressing of (Ti, Mt)(C, N)-Co-Mo2C (Mt=Ta, Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction
(Elsevier, 2016)
A mechanically induced self-sustaining reaction (MSR) has been successfully employed for manufacturing powdered cermets based on Ti, Ti–Ta and Ti–Nb carbonitrides using Co as the binder phase and Mo2C as the sintering ...
Artículo
Influence of the remnant magnetization, size distribution and content of soft magnetic reinforcement in micro-mechanical behavior of polymer matrix composites
(Elsevier, 2019-10)
In this work, the influence of the remnant magnetization, size distribution and content of soft magnetic reinforcement in micro-mechanical behavior of polymer matrix composites (Fe81Ga19/silicone) are evaluated. Melt ...