Buscar
Mostrando ítems 1-7 de 7
Ponencia
Amorfización de aleación Ti40 CU60 mediante molienda mecánica
(3 ciencias. Área de Innovación y Desarrollo,S.L., 2019)
En los últimos 10 años, las aleaciones cristalinas de Ti-Cu han sido estudiadas intensivamente por sus buenas propiedades mecánicas y protección contra corrosión. Una de las posibilidades para mejorar aún más estas ...
Artículo
Influence of Temperature on Mechanical Properties of AMCs
(MDPI, 2020-06)
This research focused on studying the effect of temperature on the mechanical properties of aluminium matrix composites (AMCs) obtained by a powder metallurgy route. Aluminium powder was milled at room temperature for 5 h ...
Artículo
Mechanical alloying and amorphization of Ti75Cu25 alloy
(Elsevier, 2022)
Ti-Cu alloys are used in dental and medical applications, due to their good mechanical properties, corrosion resistance and antibacterial properties. These properties are sensitive to microstructure and can be improved by ...
Artículo
Amorphous Al-Ti Powders Prepared by Mechanical Alloying and Consolidated by Electrical Resistance Sintering
(MDPI, 2019-10)
A novel processing method for amorphous Al50Ti50 alloy, obtained by mechanical alloying and subsequently consolidated by electrical resistance sintering, has been investigated. The characterisation of the powders and the ...
Artículo
Consolidation by MF-ERS of mechanically alloyed Al powder
(Elsevier, 2019-07)
The aim of this work is to study the viability of producing, by medium-frequency electrical resistance sintering (MF-ERS), compacts from mechanically alloyed aluminium powders. The MF-ERS process was carried out using ...
Artículo
Synthesis and characterization of in situ-reinforced Al–AlN composites produced by mechanical alloying
(Elsevier, 2017)
This research is focused on the production of aluminum matrix composites (AMCs) reinforced with various percentages of aluminum nitride (AlN). For this purpose, aluminum powder was milled at room temperature for a total ...
Artículo
Amorphous Phase Formation and Heat Treating Evolution in Mechanically Alloyed Ti–Cu Alloy for Biomedical Applications
(Springer, 2022-12)
The present work aims to produce TixCu100-x (x=90, 80, 70, and 60) amorphous alloys by using high energy ball mill. The microstructure and possible formation of amorphous phases were characterized employing laser granulometry, ...