Buscar
Mostrando ítems 1-10 de 34
Artículo
Additive manufacturing of magnetocaloric (La,Ce)(Fe,Mn,Si)13–H particles via polymer-based composite filaments
(Elsevier, 2022-11)
Additive manufacturing could be an excellent way of shaping magnetocaloric heat exchangers in magnetic refrigerators. However, the metal additive manufacturing techniques present the serious limitation that the melting of ...
Artículo
Revealing the Impact of Different Iron-Based Precursors on the ‘Catalytic’ Graphitization for Synthesis of Anode Materials for Lithium Ion Batteries
(Wiley-Blackwell, 2023)
Low cost and environmentally friendly production of graphite anodes from naturally available biomass resources is of great importance to satisfy the increasing material demand for lithium ion batteries. Herein, graphitization ...
Artículo
Spinel Ferrite Catalysts for CO2 Reduction Via Reverse Water Gas Shift Reaction
(Elsevier, 2023)
The production of CO via Reverse Water Gas Shift (RWGS) reaction is a suitable route for CO2 valorization. In this study a series of modified spinels AB2O4 (A site = Ni, Zn and Cu and B site=Fe) are investigated as RWGS ...
Artículo
Can Y2O3-MgO eutectics be new promising structural and optical ceramics?
(Elsevier, 2021)
The manuscript addresses the solidification of Y2O3-MgO eutectic composites for the first time, and the study of their microstructure, mechanical properties and infrared transmittance. The composites with eutectic composition ...
Artículo
On the order of magnetic transition in MnCo1−xFexGe (x = 0.20, 0.06 and 0.03) mechanical alloys
(Elsevier, 2023)
Mechanically amorphized MnCo1−xFexGe alloys (x = 0.20, 0.06 and 0.03) were used as precursors to obtain hexagonal austenite single phase samples. Combining thermomagnetic and magnetocaloric analysis and in situ X-ray ...
Artículo
Reactive SPS for sol–gel alumina samples: Structure, sintering behavior, and mechanical properties
(Elsevier, 2021)
This work presents a fast and direct controlled routine for the fabrication of fully dense alumina based on the reactive spark plasma sintering (reactive-SPS) of boehmite (γ-AlOOH) nano-powders obtained by the sol–gel ...
Artículo
Rietveld analysis and mechanical properties of in situ formed La-β-Al2O3/Al2O3 composites prepared by sol-gel method
(Elsevier, 2022)
In this work, the crystal evolution of α-Al2O3 composites reinforced with LBA platelets were monitored by XRD Rietveld. In addition, the mechanical properties of totally densified specimens were researched by Vickers ...
Artículo
Structural, Vibrational, and Magnetic Characterization of Orthoferrite LaFeO3 Ceramic Prepared by Reaction Flash Sintering
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)
LaFeO3 perovskite ceramics have been prepared via reaction flash technique using Fe2O3 and La2O3 as precursors. The obtained pellets have been investigated using several techniques. The formation of LaFeO3 has been clearly ...
Artículo
Powder-metallurgy fabrication of ZrB2-hardened Zr3Al2intermetallic composites by high-energy ball-milling and reactive spark-plasma sintering
(Elsevier, 2022)
A powder metallurgy route combining high-energy ball-milling (HEBM) of elemental powders and reactive spark-plasma sintering (SPS) is proposed for the controlled fabrication of novel composites based on a Zr-Al intermetallic ...
Artículo
Excellent Cryogenic Magnetocaloric Properties in Heavy Rare-earth Based HRENiGa2 (HRE = Dy, Ho, or Er) Compounds
(Science Press, 2023)
RENiX2 compounds, where RE = rare-earth element and X = p-block element, have been highly regarded for cryogenic magnetocaloric applications. Depending on the elements, they can crystallize in CeNiSi2-type, NdNiGa2-type, ...