Buscar
Mostrando ítems 21-30 de 100
Artículo
Thermal and Microstructural Dependence of the Initial Permeability of Co60Fe18Nb6(B,Cu)16 Alloys
(Elsevier, 2007)
The thermal and microstructural dependence of the initial permeability of Co60Fe18Nb6B16-yCuy (y = 0, 1) alloys have been studied. The comparison of kinetics and microstructural data of the two compositions indicate the ...
Artículo
Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties
(Elsevier, 2016-10)
In this work, several modifications of the colloidal processing technique and spark plasma sintering (SPS) to prepare yttria tetragonal zirconia composites (YTZP) with single walled carbon nanotubes (SWNT) have been ...
Artículo
Microstructure and Magnetic Properties of Mo Containing Nanoperm-Type Alloys
(Russian Academy of Sciences, 2008)
The influence of composition changes on the devitrification process, microstructure and magnetic properties of (Fe,Co)MoB(Cu) alloys was investigated. Amorphous and nanocrystalline samples were studied by differential ...
Artículo
An Equivalent Time Approach for Scaling the Mechanical Alloying Processes
(Elsevier, 2008)
Dynamics of a single ball into a planetary ball mill is analyzed leading to a cubic dependence of the power transferred during milling with the rotational speed, Ω. This leads to the definition of an equivalent time to ...
Artículo
Hardness and flexural strength of single-walled carbon nanotube/alumina composites
(Kluwer Academic Publishers, 2014)
This work adds new experimental facts on room temperature hardness and flexural strength of alumina and composites with 1, 2, 5 and 10 vol% single-walled carbon nanotubes (SWNT) with similar grain size. Monolithic Al2O3 ...
Artículo
On the use of JMAK theory to describe mechanical amorphization: a comparison between experiments, numerical solutions and simulations
(MDPI, 2018)
The kinetics of amorphization during ball milling is generally analyzed using two different approaches: the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory and Delogu and Cocco’s model for which a region ...
Artículo
Reversibility and Thermal Dependence of the Martensitic Transformation in a Melt-spun Ni55Fe17Ga26Co2 Heusler Alloy
(Elsevier, 2023)
An almost single phase 14 M modulated martensite is obtained in melt spun ribbon of Ni55Fe17Ga26Co2 Heusler alloy. The effect of thermal treatments on the stability of the reverse martensitic transformation from 14 M ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
Tunable Magnetocaloric Effect Towards Cryogenic Range by Varying Mn:Ni Ratio in All-d-metal Ni(Co)-Mn-Ti Heusler Alloys
(Elsevier, 2023)
Cryogenic magnetic refrigeration is a highly efficient and environmentally friendly technique for gas liquefaction. However, refrigerant materials undergoing large magnetocaloric response at the interesting cryogenic range ...