Buscar
Mostrando ítems 1-10 de 34
Artículo
Direct magnetocaloric measurements of Fe-B-Cr-X (X = La, Ce) amorphous ribbons
(American Institute of Physics, 2011)
A procedure has been developed to directly measure the adiabatic temperature change of amorphous melt-spun Fe-based ribbons displaying attractive room temperature magnetocaloric properties. Polycrystalline Gd ribbons are ...
Artículo
Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites
(Elsevier, 2014)
This paper is devoted to correlate the microstructure and room temperature mechanical properties of single-wall carbon nanotube (SWNT) reinforced 3. mol% yttria stabilized tetragonal zirconia with high SWNT content (2.5, ...
Artículo
Cesium adsorption isotherm on swelling high-charged micas from aqueous solutions: Effect of temperature
(Mineralogical Society of America, 2018)
The potential use of a new family of synthetic swelling micas for cesium immobilization from aqueous solution was evaluated and the structural modifications after adsorption were analyzed. The results have revealed that ...
Artículo
Extension of the Classical Theory of Crystallization to Non-isothermal Regimes: Application to Nanocrystallization Processes
(Elsevier, 2012)
The non-isothermal kinetics of primary crystallization processes is studied from numerically generated curves and their predictions have been tested in several nanocrystallization processes. Single processes and transformations ...
Artículo
Enhancement of the Magnetic Refrigerant Capacity in Partially Amorphous Fe 70Zr 30 Powders Obtained by Mechanical Alloying
(Elsevier, 2012)
After mechanical alloying Fe 70Zr 30 composition from pure starting powders, an amorphous phase with Curie temperature T C = 244 K and an intermetallic compound (that should be non-stoichiometric Zr-rich fcc Fe 2Zr phase) ...
Artículo
Cellular automata simulations on nanocrystallization processes: From instantaneous growth approximation to limited growth
(Elsevier, 2011-07)
Cellular automata simulations have been performed to simulate the crystallization process under a limited growth approximation. This approximation resembles several characteristics exhibited by nanocrystalline microstructures ...
Artículo
Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties
(Elsevier, 2016-10)
In this work, several modifications of the colloidal processing technique and spark plasma sintering (SPS) to prepare yttria tetragonal zirconia composites (YTZP) with single walled carbon nanotubes (SWNT) have been ...
Artículo
Hardness and flexural strength of single-walled carbon nanotube/alumina composites
(Kluwer Academic Publishers, 2014)
This work adds new experimental facts on room temperature hardness and flexural strength of alumina and composites with 1, 2, 5 and 10 vol% single-walled carbon nanotubes (SWNT) with similar grain size. Monolithic Al2O3 ...
Artículo
On the use of JMAK theory to describe mechanical amorphization: a comparison between experiments, numerical solutions and simulations
(MDPI, 2018)
The kinetics of amorphization during ball milling is generally analyzed using two different approaches: the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory and Delogu and Cocco’s model for which a region ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...