Buscar
Mostrando ítems 1-10 de 14
Artículo
Ball Milling of Fe83Zr6B10Cu1 Amorphous Alloy Containing Quenched in Crystals
(Elsevier, 2007)
A Fe83B10Zr6Cu1 melt-spun amorphous alloy has been ball milled in the presence of partially crystalline ribbon pieces, in order to speed up its mechanical nanocrystallization process. Microstructure and magnetic properties ...
Artículo
Enhancement of the Magnetic Refrigerant Capacity in Partially Amorphous Fe 70Zr 30 Powders Obtained by Mechanical Alloying
(Elsevier, 2012)
After mechanical alloying Fe 70Zr 30 composition from pure starting powders, an amorphous phase with Curie temperature T C = 244 K and an intermetallic compound (that should be non-stoichiometric Zr-rich fcc Fe 2Zr phase) ...
Artículo
Supersaturated Solid Solution Obtained by Mechanical Alloying of 75% Fe, 20% Ge and 5% Nb Mixture at Different Milling Intensities
(Elsevier, 2009)
Mechanical alloying process of Fe75Ge20Nb5 composition has been studied at different milling frequencies from initial pure powder mixture to the development of a single bcc phase (supersaturated solid solution). As an ...
Artículo
Thermal and Microstructural Dependence of the Initial Permeability of Co60Fe18Nb6(B,Cu)16 Alloys
(Elsevier, 2007)
The thermal and microstructural dependence of the initial permeability of Co60Fe18Nb6B16-yCuy (y = 0, 1) alloys have been studied. The comparison of kinetics and microstructural data of the two compositions indicate the ...
Artículo
Anisotropy field distribution in soft magnetic Hitperm alloys submitted to different field annealing processes
(Elsevier, 2016)
The magnetic anisotropy field distribution is discussed for Hitperm alloys annealed under different field conditions leading to different induced magnetic anisotropies: zero (ZF), transversal (TF), and longitudinal (LF) ...
Artículo
An Equivalent Time Approach for Scaling the Mechanical Alloying Processes
(Elsevier, 2008)
Dynamics of a single ball into a planetary ball mill is analyzed leading to a cubic dependence of the power transferred during milling with the rotational speed, Ω. This leads to the definition of an equivalent time to ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Instantaneous growth approximation describing the nanocrystallization process of amorphous alloys: A cellular automata model
(Elsevier, 2008-07)
A cellular automata simulation based on an instantaneous growth approximation is developed to model the nanocrystallization kinetics. In this frame, the time required for a nucleus to grow up to its maximum size is ...
Artículo
Two Milling Time Regimes in the Evolution of Magnetic Anisotropy of Mechanically Alloyed Soft Magnetic Powders
(Elsevier, 2011)
The milling time evolution of magnetic anisotropy of ball milled powders can be described considering two regimes. First, for short milling times, the main factor affecting the magnetic behavior of the alloy is the ...
Artículo
Study of the Induced Anisotropy in Field Annealed Hitperm Alloys by Mössbauer Spectroscopy and Kerr Microscopy
(Springer Nature, 2016)
Samples of Fe39Co39Nb6B15Cu1 alloy were nanocrystallized under zero field annealing (ZF) and transverse field annealing (TF) conditions. A reduction in coercivity for TF samples with respect to ZF sample (16 and 45 A/m, ...