Search
Now showing items 61-70 of 113
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
On the isothermal kinetics analysis of transformations in metastable systems. A combined use of isothermal and non-isothermal calorimetry
(Taylor & Francis, 2007)
A procedure to optimize the isothermal calorimetric data of very slow transformation processes of metastable systems is proposed. The method uses an experimental baseline to identify the transitory effects due to the ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Obtaining magnetocaloric MnCo(Fe)Ge intermetallics from low temperature treatment of mechanically alloyed precursors
(Elsevier, 2020)
Production of the intermetallic MnCo0.8Fe0.2Ge phase, interesting as magnetocaloric material, is obtained by using an almost fully amorphous mechanically alloyed precursor. Thermal treatment to develop the intermetallic ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
The magnetocaloric effect in soft magnetic amorphous alloys
(2007)
The influence of different compositional modifications on the magnetic entropy change and refrigerant capacity of Finemet, Nanoperm, HiTperm, and bulk amorphous alloys is presented. For all the studied alloys, the field ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Mechanochemistry of copper sulphides: phase interchanges during milling
(Springer Nature, 2017)
Covellite, CuS and chalcocite, Cu2S nanoparticles prepared in the explosive manner from elemental precursors were further ball-milled in order to observe additional changes caused by mechanical action. Three phases of ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Influence of microstructure on the enhancement of soft magnetic character and the induced anisotropy of field annealed HITPERM-type alloys
(AIP Publishing, 2015)
Hitperm-type rapidly quenched ribbons were submitted to field annealing, both longitudinal field (LF) and transversal field (TF) to the axis of the ribbon. LF annealing yields a reduction of the magnetic anisotropy and ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Touch-free reactive flash sintering of dense strontium hexaferrite permanent magnet
(John Wiley and Sons, 2023)
This work presents an extension of the touch-free flash sintering technique. In the proposed technique, chemical reaction and sintering occur in a single step, without the use of electrodes, in the presence of electric ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Magnetocaloric effect of Co62Nb6Zr2B30 amorphous alloys obtained by mechanical alloying or rapid quenching
(2014)
Amorphous samples of nominal composition Co62Nb6Zr2B30 have been prepared using mechanical alloying (MA) and rapid quenching (RQ) techniques. Differences appear in Curie temperature and the phases developed after ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Magnetic permeability of ( Fe Co Ge ) 88 Zr 6 B 5 Cu 1 alloys: Thermal stability in a wide temperature range.
(AIP Publishing, 2008)
Temperature dependence, from room temperature up to 1000 K, of the initial permeability of Fe83−xCoxGe5Zr6B5Cu1 x=5 and 20 alloys at different stages of devitrification is reported. As nanocrystallization progresses, ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Reactive flash sintering of SrFe12O19 ceramic permanent magnets
(Elsevier, 2022)
Reactive flash-sintering technique has been used in order to obtain strontium ferrite magnets from a mixture of SrCO3 and Fe2O3 commercial powders. This technique allows preparing sintered SrFe12O19 at a furnace temperature ...
Article
![With access to the full text Icon](/themes/idUS//images/acceso/opened_access.png)
Two Milling Time Regimes in the Evolution of Magnetic Anisotropy of Mechanically Alloyed Soft Magnetic Powders
(Elsevier, 2011)
The milling time evolution of magnetic anisotropy of ball milled powders can be described considering two regimes. First, for short milling times, the main factor affecting the magnetic behavior of the alloy is the ...