Perfil del autor: Caraballo Rodríguez, Isidoro
Datos institucionales
Nombre | Caraballo Rodríguez, Isidoro |
Departamento | Farmacia y Tecnología Farmacéutica |
Área de conocimiento | Farmacia y Tecnología Farmacéutica |
Categoría profesional | Catedrático de Universidad |
Correo electrónico | Solicitar |
Estadísticas
-
Nº publicaciones
41
-
Nº visitas
7395
-
Nº descargas
11399
Publicaciones |
---|
Artículo
3D Printing DirePowder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives
(MDPI, 2024)
The production of tailored, on-demand drug delivery systems has gained attention in pharmaceutical development over the ... |
Artículo
Development of 3D-Printed Bicompartmental Devices by Dual-Nozzle Fused Deposition Modeling (FDM) for Colon-Specific Drug Delivery.
(MDPI, 2023)
Dual-nozzle fused deposition modeling (FDM) is a 3D printing technique that allows for the simultaneous printing of two ... |
Artículo
Comparison between polymeric excipients using SeDeM expert system in combination with mathematical modeling and quality control tools
(Elsevier, 2023)
Based on the quality by design approach, we used the SeDeM expert system to assess seven polymers of different chemical ... |
Tesis Doctoral
Nuevos sistemas expertos para el diseño de comprimidos. Uso de polímeros biodegradables para liberación modificada de fármacos
(2023)
Esta Tesis Doctoral aborda puntos críticos que deben tenerse en cuenta en el diseño de formas farmacéuticas sólidas para ... |
Artículo
Stereolithographic 3D printing: Formulation design based on percolation thresholds
(Elsevier, 2023)
Stereolitograpy (SLA) is an optical photosolidification technology, which can be used to produce 3D printed dosage forms. ... |
Artículo
Assessment of the Extrusion Process and Printability of Suspension-Type Drug-Loaded AffinisolTM Filaments for 3D Printing
(MDPI, 2022)
Three-dimensional (3D) printing technology enables the design of new drug delivery systems for personalised medicine. ... |
Artículo
Redox-Responsive Polymersomes as Smart Doxorubicin Delivery Systems
(MDPI, 2022)
Stimuli-responsive polymersomes have emerged as smart drug delivery systems for programmed release of highly cytotoxic ... |
Artículo
3D Printed Fractal-like Structures with High Percentage of Drug for Zero-Order Colonic Release
(MDPI, 2022)
Colonic drug delivery of drugs is an area of great interest due to the need to treat high prevalence colonic local diseases ... |
Artículo
3D printed systems for colon-specific delivery of camptothecin-loaded chitosan micelles
(Elsevier, 2021)
The use of 3D printing technology in the manufacturing of drug delivery systems has expanded and benefit of a customized ... |
Artículo
A Biodegradable Copolyester, Poly(butylene succinate-co-ε-caprolactone), as a High Efficiency Matrix Former for Controlled Release of Drugs
(Multidisciplinary Digital Publishing Institute (MDPI), 2021)
A biodegradable copolyester, poly(butylene succinate-co-ε-caprolactone) (PBS_CL), was used for first time as an excipient ... |
Trabajo Fin de Grado
Tecnología binder jetting. Aplicación a la impresión 3D de medicamentos
(2021)
Desde finales del siglo XX, hasta el día de hoy, se han realizado grandes avances en todo lo relacionado con la impresión ... |
Artículo
Diseño de estudios Gauge R&R cruzado y anidado para la validación de los modelos matemáticos de Heckel y Ryshkewitch- Duckworth
(Universidad de Granada, 2021)
Introducción: Los estudios gauge permiten ganar información sobre el desempeño de procesos y son de utilidad para control ... |
Artículo
Critical points for predicting 3D printable filaments behaviour
(Elsevier, 2021)
Fractal dimension has been employed for the first time to provide key information about the behaviour of extruded filaments. ... |
Trabajo Fin de Grado
Tecnologías aplicadas a la impresión 3D de medicamentos
(2020)
La tecnología de impresión 3D se ha ido desarrollando de forma muy amplia desde su aparición a finales del siglo XX. Desde ... |
Artículo
3D printed drug delivery systems based on natural products
(Multidisciplinary Digital Publishing Institute (MDPI), 2020)
In the last few years, the employment of 3D printing technologies in the manufacture of drug delivery systems has increased, ... |
Tesis Doctoral
New imaging approach to study the microstructure of amorphous drug formulations based on multifractal geometry
(2019)
La dispersión sólida amorfa (ASD) es una estrategia exitosa que permite mejorar la solubilidad aparente, la velocidad de ... |
Artículo
Achieving High Excipient Efficiency with Elastic Thermoplastic Polyurethane by Ultrasound Assisted Direct Compression
(MDPI, 2019)
Ultrasound assisted compression (USAC) is a manufacturing technique which applies thermal and mechanical energy to the ... |
Artículo
Printfills: 3D printed systems combining fused deposition modeling and injection volume filling. Application to colon-specific drug delivery
(Elsevier, 2019)
Three-dimensional printing has become a feasible manufacturing technique for pharmaceutical products providing cheap and ... |
Artículo
Early stages of drug crystallization from amorphous solid dispersion via fractal analysis based on chemical imaging
(Elsevier, 2018)
Early stages of crystallization from amorphous solid dispersion (ASD) are typically not detected by means of standard ... |
Trabajo Fin de Grado
Diseño y caracterización de sistemas farmacéuticos elaborados por impresión en 3D (II)
(2018)
El concepto de fractales, uno de los grandes desarrollos en la comunidad científica durante el siglo pasado, ha sido ... |
Artículo
Application of ultrasound-assisted compression in pharmaceutical technology. Design and optimization of oral sustained-release dosage forms
(Elsevier, 2017)
Ultrasound-assisted compression (USAC) is a technology combining a conventional compression process and US irradiation. ... |
Tesis Doctoral
Diseño y caracterización de medicamentos de liberación prolongada utilizando nuevos polímeros biodegradables.
(2017)
En la presente sección se muestra un resumen global de los resultados obtenidos tras el estudio y la caracterización de ... |
Trabajo Fin de Grado
Sistemas matriciales para liberación modificada de fármacos basados en polímeros biodegradables
(2016)
Los comprimidos son la forma farmacéutica más extendida entre los medicamentos comercializados, sobre todo desde la aparición ... |
Artículo
ABP con plataforma virtual para los alumnos de biofarmacia y farmacocinética y farmacia galénica general
(Revista d’educació superior en Farmàcia, 2013)
Problem based Learning (PBL) is a technique for educational innovation that has the advantage of turning the student into ... |
Artículo
Critical points in ethylcellulose matrices: Influence of the polymer, drug and filler properties
(Hrvatsko Farmaceutsko Drustvo/Croatian Pharmaceutical Society, 2013)
Percolation theory has been applied to study the drug re- lease behaviour in multicomponent inert matrices con- taining ... |
Artículo
Collaboration between HPMC and NaCMC in order to Reach the Polymer Critical Point in Theophylline Hydrophilic Matrices
(Hindawi Publishing Corporation, 2012)
Percolation theory has been applied in order to study the existence of critical points as well as the possibility to find ... |
Artículo
Estudio de la utilización de fármacos antipsicóticos en una fundación pública para pacientes esquizofrénicos en Sevilla
(Organización de Farmacéuticos Ibero-Latinoamericanos (OFIL), 2011)
Objetivo: Analizar la farmacoterapia de dos grupos de pacientes esquizofrénicos de la Fundación Andaluza para la Integración ... |
Artículo
Estudio de la utilización de medicación concomitante al tratamiento antipsicótico en una fundación pública para pacientes esquizofrénicos en Sevilla
(Organización de Farmacéuticos Ibero-Latinoamericanos (OFIL), 2011)
Objetivo: Analizar la farmacoterapia de dos grupos de pacientes esquizofrénicos de la Fundación Andaluza para la Integración ... |
Artículo
Estimation of the percolation thresholds in ternary lobenzarit disodium-dextran-HPMC hydrophilic matrices tablets: Effects of initial porosity
(Elsevier, 2009)
The aim of this work is to estimate the excipient percolation threshold for a new combined matrix native dextran (DT), ... |
Tesis Doctoral |
Artículo
Study of the Critical Points in Lobenzarit Disodium Hydrophilic Matrices for Controlled Drug Delivery
(Pharmaceutical Society of Japan, 2006)
Percolation theory is a multidisciplinary theory that studies chaotic systems. It has been applied in the pharmaceutical ... |
Patente. Invención
Composición farmacéutica y medicamento de liberación controlada de morfina basado en un complejo de morfina con un polímero acrílico
(Oficina Española de Patentes y Marcas (OEPM), 2005)
Composición farmacéutica y medicamento de liberación controlada de morfina basado en un complejo de morfina con un polímero ... |
Artículo
Application of a new mathematical method for the estimation of the mean surface area to calculate the percolation threshold of Lobenzarit dissodium salt in controlled release matrices
(The Pharmaceutical Society of Japan, 2004)
One of the practical handicaps for the application of the percolation theory to estimate the percolation threshold of drugs ... |
Tesis Doctoral |
Tesis Doctoral |
Tesina |
Tesis Doctoral |
Tesis Doctoral
Estudio del umbral de percolación para la optimización del diseño de matrices inertes de liberación controlada
(1998)
Las formas sólidas representan la mayoría de las formas de dosificación existentes en el mercado farmacéutico. En la ... |
Patente. Invención
Sistema de liberación controlada de morfina y otros fármacos solubles en agua por complejación con sustancias poliméricas
(Oficina Española de Patentes y Marcas (OEPM), 1997)
Sistema de liberación controlada de morfina y otros fármacos solubles en agua por complejación con sustancias poliméricas. ... |
Artículo |
Artículo |