Perfil del autor: Trueba Muñoz, Paloma
Datos institucionales
Nombre | Trueba Muñoz, Paloma |
Departamento | Ingeniería y Ciencia de los Materiales y del Transporte |
Área de conocimiento | Ciencia de los Materiales e Ingeniería Metalúrgica |
Categoría profesional | Profesora Titular de Universidad |
Correo electrónico | Solicitar |
Estadísticas
-
Nº publicaciones
23
-
Nº visitas
6437
-
Nº descargas
4212
Publicaciones |
---|
Artículo
A new multi-criteria decision-making approach for the design and selection of materials and manufacturing processes of toys for children with autism
(Elsevier, 2024)
The efficiency and comfort of daily tasks are intricately shaped by the dynamic interaction between users and technology. ... |
Artículo
Approach to the Fatigue and Cellular Behavior of Superficially Modified Porous Titanium Dental Implants
(MDPI, 2022)
In this work, the fatigue and cellular performance of novel superficially treated porous titanium dental implants made up ... |
Artículo
Influence of Femtosecond Laser Modification on Biomechanical and Biofunctional Behavior of Porous Titanium Substrates
(MDPI, 2022)
Bone resorption and inadequate osseointegration are considered the main problems of titanium implants. In this investigation, ... |
Artículo
Bioactive Bilayer Glass Coating on Porous Titanium Substrates with Enhanced Biofunctional and Tribomechanical Behavior
(MDPI, 2022)
The use of porous titanium samples fabricated by space-holder powder metallurgy with bioactive coatings has already been ... |
Artículo
Tribo-mechanical and cellular behavior of superficially modified porous titanium samples using femtosecond laser
(Elsevier, 2021)
In this work, the surface of porous titanium samples obtained by the space-holder technique was treated with a femtosecond ... |
Artículo
Biofunctionalization of Porous Ti Substrates Coated with Ag Nanoparticles for Potential Antibacterial Behavior
(MDPI, 2021)
Ti prosthesis have shown better biological compatibility, mechanical performance, and resistance to corrosion in cases of ... |
Artículo
Influence of Successive Chemical and Thermochemical Treatments on Surface Features of Ti6Al4V Samples Manufactured by SLM
(MDPI, 2021)
Ti6Al4V samples, obtained by selective laser melting (SLM), were subjected to successive treatments: acid etching, chemical ... |
Artículo
Fabrication and characterization of superficially modified porous dental implants
(Elsevier, 2021)
Stress-shielding and loosening compromise the success of dental implants under real-life service conditions. This work ... |
Artículo
Use of Impedance Spectroscopy for the Characterization of In-Vitro Osteoblast Cell Response in Porous Titanium Bone Implants
(MDPI, 2020)
The use of titanium implants with adequate porosity (content, size and morphology) could solve the stress shielding ... |
Artículo
Surface Modification of Porous Titanium Discs Using Femtosecond Laser Structuring
(MDPI, 2020)
The failure of titanium implants is associated with two main problems that include the bone resorption and fracture of the ... |
Artículo
In Vitro Bone Cell Behavior on Porous Titanium Samples: Influence of Porosity by Loose Sintering and Space Holder Techniques
(MDPI, 2020)
A great variety of powder metallurgy techniques can produce biomimetic porous titanium structures with similar mechanical ... |
Artículo
Porous Titanium Cylinders Obtained by the Freeze-Casting Technique: Influence of Process Parameters on Porosity and Mechanical Behavior
(MDPI, 2020)
The discrepancy between the stiffness of commercially pure titanium and cortical bone ... |
Artículo
Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders
(Elsevier, 2020)
In this work, a sequential compaction device has been successfully developed and implemented to produce commercially pure ... |
Trabajo Fin de Máster
Implementación, fabricación y caracterización de cilindros con porosidad alargada de Ti c.p, mediante técnicas de Freeze-Casting
(2019)
El presente Trabajo Fin de Máster estudia la manera de obtener cilindros de titanio con porosidad gradiente longitudinal ... |
Artículo
Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique
(MDPI, 2019)
Titanium and its alloys are reference materials in biomedical applications because of their desirable properties. However, ... |
Artículo
Influence of the Compaction Pressure and Sintering Temperature on the Mechanical Properties of Porous Titanium for Biomedical Applications
(MDPI, 2019)
In the present work, the use of porous titanium is proposed as a solution to the difference in stiffness between the implant ... |
Tesis Doctoral
Desarrollo de titanio con porosidad gradiente radial y longitudinal para aplicaciones biomédicas
(2017)
La diferencia de rigidez entre el tejido óseo y los implantes de Titanio (Ti) implica un apantallamiento de tensiones que ... |
Ponencia |
Ponencia
A simple and economical device to process Ti cylinders with elongated porosity by freeze-casting techniques: design and manufacturing [Póster]
(Trans Tech Publications Ltd., 2017)
Design, manufacture and validation of a simple and economic device that allows producing Ti cylinders with directed porosity ... |
Artículo
Design, processing and characterization of titanium with radial graded porosity for bone implants porosity for bone implants
(Elsevier, 2016)
Titanium cylinders with radial graded porosity, which are potentially suitable for biomedical applications (replacement ... |
Artículo |
Artículo
Designing, processing and characterisation of titanium cylinders with graded porosity: An alternative to stress-shielding solutions
(Elsevier, 2014)
Bone resorption events and consequent failure of titanium implants are frequently related to stress-shielding problems, ... |
Artículo
La sostenibilidad en la Ingeniería Industrial
(Colegio Oficial de Peritos e Ingenieros Técnicos Industriales de Sevilla.COPITI, 2009)
En la profesión de ingeniero donde a diario se idea, proyecta y construye sistemas industriales, se tiene la necesidad de ... |