Buscar
Mostrando ítems 1-10 de 10
Artículo
Failure initiation criterion in bonded joints with composites based on singularity parameters and practical procedure for design purposes
(Tailor & Francis, 2015)
Composite to metal adhesively bonded joints generates critical points where geometry and material properties change abruptly. These points (multimaterial corners) are potential locations for failure initiation. There exist ...
Ponencia
Comparación experimental de la tenacidad a fractura transversal de laminados unidireccionales correspondientes al crecimiento longitudinal o transversal de grietas
(Asociación Española de Materiales Compuestos (AEMAC), 2015-07)
El objetivo del trabajo es determinar y comparar, en laminados unidireccionales, las tenacidades a fractura transversal correspondientes a dos direcciones de crecimiento de grieta, paralela (GIcpar) y perpendicular ...
Ponencia
A modified Brazilian test for the generalized-fracturetoughness determination in multimaterial corners. Numerical and experimental results
(AEMAC (Asociación Española de Materiales Compuestos), 2011)
In the present work, a general procedure for the experimental evaluation of the generalized fracture toughness in multimaterial corners is defined. The proposed method is suitable for closed corners (all material wedges ...
Tesis Doctoral
Study of the stress state and failure in adhesive joints with composite materials.
(2012-04-16)
Con la creciente demanda de los materiales compuestos por parte de la industria, las uniones adhesivas se destacan como una atractiva alternativa frente a las tradicionales uniones mecánicas, que exigen como paso ...
Artículo
Fatigue crack initiation and damage characterization in Brazilian test specimens for adhesive joints
(Taylor & Francis, 2014)
The present study is focused on the fatigue failure initiation at bimaterial corners by means of a configuration based on the Brazilian disc specimens. These specimens were previously used for the generalized fracture ...
Ponencia
Thoughness determination in composite multimaterial closed corners
(2011)
In the present work, a general procedure for the experimental evaluation of the generalized fracture toughness in multimaterial corners is defined. The proposed method is suitable for closed corners (all material wedges ...
Artículo
A least squares procedure for the evaluation of multiple generalized stress intensity factors at 2D multimaterial corners by BEM
(Elsevier, 2012-03)
Detailed characterization of linear elastic stress states at corners and crack tips requires knowledge of the stress singularity orders, the characteristic angular functions and the generalized stress intensity factors ...
Artículo
Determination of Generalized Fracture Toughness in composite multimaterial closed corners with two singular terms - Part I: Test proposal and numerical analysis
(Elsevier, 2012-07)
In the present work a general procedure for the experimental evaluation of Generalized-Fracture-Toughness values at multimaterial closed corners is defined. The lack of symmetries in the stress fields at multimaterial ...
Artículo
Representativity of thermal stresses in designing composite joints based on singular stress states at multimaterial corners
(Elsevier, 2011-09)
Using adhesives curing at temperature in bonded joints between dissimilar materials (composites and metals) gives rise to residual stresses due to the difference in the value of the thermal expansion coefficients of the ...
Artículo
Determination of Generalized Fracture Toughness in composite multimaterial closed corners with two singular terms - Part II: Experimental results
(Elsevier, 2012-07)
In this paper the experimental part of the procedure for the Generalized-Fracture-Toughness determination in multimaterial closed corners with two stress singularities is presented. The so-called Generalized-Fracture-Toughness ...