Buscar
Mostrando ítems 1-10 de 55
Artículo
Design for a cruciform coupon used for tensile biaxial transverse tests on composite materials
(Elsevier, 2017-06)
This paper focuses on the design of the appropriate geometry for cruciform coupons conceived to be tested under tensile biaxial transverse loads. To this end, Finite Element models were developed and their results were ...
Artículo
Special Issue on “Biomaterials for Bone Tissue Engineering”
(MDPI, 2020-04)
The present Special Issue covers recent advances in the field of tissue engineering applied to bone tissue. Bone tissue engineering is a wide research topic, so di erent works from di erent transversal areas of research ...
Artículo
Cálculo fotoelástico de los factores de intensidad de tensiones mediante desarrollos en serie. Influencia de los términos no singulares
(Asociación Española de Ingeniería Mecánica, 1992-09)
Se presenta un estudio experimental para demostrar la necesidad de incluir dos funciones en la reproducción de problemas antisimétricos de grietas. La no inclusión de una de estas funciones conduce a resultados inválidos ...
Ponencia
Análisis de postpandeo de un panel rigidizado de material compuesto mediante técnicas de modelado multi-global-local incluyendo daño interlaminar
(Asociación Española de Materiales Compuestos (AEMAC), 2015-07)
El uso de paneles rigidizados de material compuesto ha sido incorporado en numerosas aplicaciones. En las situaciones en las que las cargas originan estados tensionales de compresión, éstas pueden producir fenómenos de ...
Artículo
Damage localization and quantification in beams from slope discontinuities in static deflections
(KoreaScience, 2018)
This paper presents a flexibility based method for damage identification from static measurements in beam-type structures. The response of the beam at the Damaged State is decomposed into the response at the Reference State ...
Artículo
Revisiting the problem of a crack impinging on an interface: A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model
(Elsevier, 2017-07)
The problem of a crack impinging on an interface has been thoroughly investigated in the last three decades due to its important role in the mechanics and physics of solids. In the current investigation, this problem is ...
Artículo
Characterization of 3D printed long fibre reinforced composites
(Elsevier, 2018-02)
Additive Layer Manufacturing (ALM) process is used in the present investigation to manufacture long fibre reinforced composite parts using the MarkOne® 3D-printer. In ALM, a continuous filament (including a tow of fibres) ...
Artículo
Bending and free vibration analysis of functionally graded graphene vs. carbon nanotube reinforced composite plates
(Elsevier, 2018-02)
Carbon-based nanomaterials have drawn the attention of a large section of the scientific community in recent years. Most research has focused on carbon nanotubes after some experimental studies reported outstanding ...
Artículo
A novel 2.5D spectral approach for studying thin-walled waveguides with fluid-acoustic interaction
(Elsevier, 2018-07)
This paper presents a novel formulation of two spectral elements to study guided waves in coupled problems involving thin-walled structures and fluid-acoustic enclosures. The aim of the proposed work is the development of ...
Artículo
Modeling elastic wave propagation in fluid-filled boreholes drilled in nonhomogeneous media: BEM – MLPG versus BEM-FEM coupling
(Elsevier, 2017)
The efficiency of two coupling formulations, the boundary element method (BEM)-meshless local Petrov–Galerkin (MLPG) versus the BEM-finite element method (FEM), used to simulate the elastic wave propagation in fluid-filled ...