Buscar
Mostrando ítems 1-5 de 5
Artículo
Cálculo fotoelástico de los factores de intensidad de tensiones mediante desarrollos en serie. Influencia de los términos no singulares
(Asociación Española de Ingeniería Mecánica, 1992-09)
Se presenta un estudio experimental para demostrar la necesidad de incluir dos funciones en la reproducción de problemas antisimétricos de grietas. La no inclusión de una de estas funciones conduce a resultados inválidos ...
Artículo
Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials
(Elsevier, 2022-04)
In this paper, several models for analysing peeling tests are considered, including numerical models based on FEM, semi-analytical approaches, and beam models including an elastic interface. Results show that none of the ...
Ponencia
Study of the effect of frequency on composite laminates under uniaxial fatigue loads
(AEMAC (Asociación Española de Materiales Compuestos), 2013-07)
Composites are nowadays widely used in primary structures. For safety reasons, the characterization of these materials under fatigue loads is being a very important task. The main advances in this field have been made ...
Artículo
A new in situ peeling test for the characterisation of composite bonded joints
(Elsevier, 2018-10)
At the moment, bonded joints quality on composites used in aeronautical industry is verified based on the determination of the interlaminar fracture toughness (Gc) obtained by means of the Double Cantilever Beam (DCB) or ...
Artículo
Influence of the size and depth of a circumferential notch on the impact behavior of streetlights. A passive-safety concept
(Elsevier, 2015-07)
Impact tests on weakened streetlights were carried out using a high energy pendulum. The weakening mechanism consists of a circumferential notch at the base of the streetlight. The objective is twofold: firstly to reduce ...