Buscar
Mostrando ítems 1-4 de 4
Artículo
Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials
(Elsevier, 2022-04)
In this paper, several models for analysing peeling tests are considered, including numerical models based on FEM, semi-analytical approaches, and beam models including an elastic interface. Results show that none of the ...
Artículo
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM
(Elsevier, 2019-04)
Interface models for triggering damage events have been extensively used in many engineering applications due to their inherent versatility and relatively simple numerical implementations. Usually, the non-linear behavior ...
Artículo
A new in situ peeling test for the characterisation of composite bonded joints
(Elsevier, 2018-10)
At the moment, bonded joints quality on composites used in aeronautical industry is verified based on the determination of the interlaminar fracture toughness (Gc) obtained by means of the Double Cantilever Beam (DCB) or ...
Ponencia
Caracterización de uniones material compuesto-hormigón mediante ensayos de pelado, cortadura, tracción plana y torsión
(Asociación Española de Materiales Compuestos (AEMAC), 2015-07)
El presente trabajo se centra en el análisis de diferentes ensayos que permiten determinar la calidad de la unión entre laminados de material compuesto y hormigón. Los ensayos considerados han sido: Pull Off (ensayo a ...