Buscar
Mostrando ítems 1-10 de 15
Artículo
Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites
(Elsevier, 2014)
This paper is devoted to correlate the microstructure and room temperature mechanical properties of single-wall carbon nanotube (SWNT) reinforced 3. mol% yttria stabilized tetragonal zirconia with high SWNT content (2.5, ...
Artículo
Microestructura de AI2O3/TZP codopado con Fe2O3 y TiO2 fabricado por reacción (RBAO)
(2003)
Se han fabricado compuestos de 80% vol. Al2 O3/TZP (ZrO2 estabilizada con 2% mol Y2 O3) codopados con 1% vol. Fe2 O3 y 1% vol. TiO2 mediante la tecnología RBAO (“Reaction Bonding of Aluminum Oxide”), que se han sinterizado ...
Artículo
Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties
(Elsevier, 2016-10)
In this work, several modifications of the colloidal processing technique and spark plasma sintering (SPS) to prepare yttria tetragonal zirconia composites (YTZP) with single walled carbon nanotubes (SWNT) have been ...
Artículo
High-temperature plastic behavior of TZP-Ni cermets
(Wiley-Blackwell, 2008-02)
The creep behavior of tetragonal zirconia TZP-Ni cermets with metal contents below, close to, and above the percolation limit has been studied. Compressive creep tests were performed on as-received materials and samples ...
Artículo
Hardness and flexural strength of single-walled carbon nanotube/alumina composites
(Kluwer Academic Publishers, 2014)
This work adds new experimental facts on room temperature hardness and flexural strength of alumina and composites with 1, 2, 5 and 10 vol% single-walled carbon nanotubes (SWNT) with similar grain size. Monolithic Al2O3 ...
Artículo
Evidence of nanograin cluster coalescence in spark plasma sintered α-Al2O3
(Elsevier, 2013)
The aim of this study is to elucidate the coarsening kinetics involved during densification of fine-grained pure α-alumina by spark plasma sintering. Low temperature and short dwell time sintering conditions were used to ...
Artículo
Mechanical and electrical properties of low SWNT content 3YTZP composites
(Elsevier, 2015)
Fully dense 3mol% Y2O3-ZrO2 (3YTZP) composites with low single wall carbon nanotube content (0.5, 1 and 1.5vol% SWNT) were prepared by colloidal processing and spark plasma sintering (SPS). SWNT were distributed at ceramic ...
Artículo
Improvement of Vickers hardness measurement on SWNT/Al2O3 composites consolidated by spark plasma sintering
(Elsevier, 2014)
Dense alumina composites with different carbon nanotube content were prepared by colloidal processing and consolidated by Spark Plasma Sintering (SPS). Single-wall carbon nanotubes (SWNTs) were distributed at grain boundaries ...
Artículo
Influence of oxidation on the high-temperature mechanical properties of zirconia/nickel cermets
(Elsevier, 2006-06)
The influence of an oxidizing atmosphere on the high-temperature plasticity of zirconia/nickel cermets has been studied by conducting creep tests in air. The resulting microstructure has been characterized by scanning, ...
Artículo
Microstructural characteristics of TZP/Ni cermets plastically deformed at high temperature
(Elsevier, 2007)
The microstructure of 3 mol% Y2O3-stabilized tetragonal ZrO2/Ni (TZP/Ni) composites has been investigated for nickel concentrations of 20, 30 and 40 vol.% before and after creep tests conducted in argon atmosphere at 1250 ...